Adding files of data on primary - errors pending

Similar Questions

• Adding files of data in environment dataguard

  Hi gurus,
  
  I have a doubt regarding the data file adding a table space which lies in environmental protection data.
  
  My oracle database is install in oracle 10 g 2 on windows 64-bit server. I have a physical primary data and data base of DR.
  I'll add the data file in the primary database. All my data files located in the directory "C:/oradata/data file / $Month_Name.
  
  Now, to add the new data file, I create a new directory under file C:/oradata/data / named November and add the data file in the directory from November .
  
  1 Will add new folder named November will automatically reflected in the database of DR also. or I have to go to the doctor and add the same directory and then add the data file in the primary database.
  
  2. when I add the primary database data file, it will affect the DR database? Or the DR database will synchronize automatically?
  
  Please provide me with the step by step procedure.
  
  can someone provide me steps to follow, so that primary and DR will be synchronized?
  
  Thank you
  Meena
  
  Published by: 949632 on November 16, 2012 22:46
  
  Published by: 949632 on November 16, 2012 22:47

  Hello

  The directory not created on the database ensures if create you it on the primary database.
  Let me give you an example. Suppose the data files on the standby database are currently at the location 'D:\oracle\std\data_5' and now you need to create another directory called 'data_11' as 'D:\oracle\std\data_11', then on the database pending, set the parameter "db_file_name_convert' as shown below:

  db_file_name_convert='D:\oracle\P01\sapdata5\','D:\oracle\std\data_5\','D:\oracle\P01\BTABD_11','D:\oracle\std\data_11'
  

  Db_file_name_convert syntax:

  db_file_name_convert='','','',''
  

  Note: parameter db_file_name_convert must be set to the standby database and is a static parameter. So, you have to bounce the database pending after setting it.

  It could be useful! Please examine fence by providing appropriate points if you feel that your question has been answered.

• LV 2011: Error 1334: Installation cannot find a file in data.cab

  I'm trying to create an installation using Setup LV2011. After a success, I test it on PC Windows 7 x 64 and I see this error during installation:

  Error 1334: The file: XYZ cannot be installed because the file is not found in the data.cab file... Continue?

  I check the data.cab file and see the file XYZ. The XYZ file is BAT file that I want to run after the installer is finished, or another file included in the installer.

  Any suggestions?

  Hello

  You run the patch f2? It is supposed to solve a known problem with the construction of large installers, it isn't you receive the error message, but it could be a side effect.

  I checked through the other problems for LabVIEW 2011 known, and I have not found something that seemed relevant. I also checked for corrective action requests and have not found those that mention the same problem.

  I have found some similar questions of LabVIEW 8.5, and in these cases, the culprit was a + in file names. You can check that the names of files in your error message exactly the names of files in the file data.cab. You can also try to change file names relevant to something very simple with only letters.

  I was wondering, are you will be able to include all the other files that do not throw errors, or each file that you try throws errors?

  If you wish to post your project, I would be happy to see if I can reproduce the error.

  Kind regards

  Luke B.

• The ERPi load mapping file for data import error

  Hello

  
  

  I am creating the ERPi mapping and download of mapping for a dimension via a file. It gives an error. I use the explicit mapping. Please help me with this. Error screenshot is attached.

  Hello Asad,

  Create a unique mapping using the FDM web application and then export the map that you just created and it will show the required format

  Rgds,

  SH

• ORA-01110: data file 1: ' +DATA/cchdr/datafile/system.266 open when sleep

  I configured a physical standby with the primary node 3 CARS. All servers are Redhat 2.6, Oracle 11.2.
  
  After duplicate successively elementary to the wait, I tried to open the physics of the day before, but error

  SQL> alter database open;
  ERROR at line 1:
  ORA-10458: standby database requires recovery
  ORA-01194: file 1 needs more recovery to be consistent
  ORA-01110: data file 1: '+DATA/cchdr/datafile/system.266.718714217'

  Then I tried

   SQL> alter database recover datafile '+DATA/cchdr/datafile/system.266.718714217';
  alter database recover datafile '+DATA/cchdr/datafile/system.266.718714217'
  *
  ERROR at line 1:
  ORA-00283: recovery session canceled due to errors
  ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
  
  SQL> recover database until cancel using backup controlfile;
  ORA-00283: recovery session canceled due to errors
  ORA-01666: control file is for a standby database

  What's wrong?
  Thank you.

  Ok. First of all, did you restart recovery with ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT; first? Since killed yo9u things you must get the day before to a consistent state.

  Now, that error means generally that you created the standby controlfile (that you used to create the previous day in the first place) before you took the backup of the primary. You need to take backup of the primary, and then create the standby control file. You can try to recreate the standby control file. Stop the day before, go to primary and create a new standby controlfile, replace the day before with this new controlfile and restart the day before. Start the recovery, let her run a little and then try again.

  And if you use ASM follow Note 734862.1 "Guide step by step on how to re-create the standby control file when the data files are on ASM and Using Oracle Managed File."

  Larry

• iPad IOS 9.3.4 (with GPS) air 2: using Skydemon (used for the flight) gives "Waiting for location data", as the error

  I use my iPad 2 a air application during the flight of an aircraft (Skydemon) for flight and my flight plan.

  Most of the time it works fine. Yesterday, I received an error "pending for location data. seems dat that GPS does not work correctly. I've recently implemented in the latest IOS update.

  Don't know

• File generation Date two consequtive

  I have a requirement to search for files to date in a data log application.

  The files are generated and stored in the format< dayofyear-dd-mm-yyyy.txt="">

  And it must be added the user shall enter information in this genearte the first day and I need to automatically generate the next day file reference. That is the problem. While I've evolved logical to create automatically the number of DayOfYear (Dec. 31 it will generate 01 as the next DayOfYear) I do not think that its easy to do the same for the date. I guess it must manage things like leap years and months of 30 days etc.

  Simple ideas to do the above? By joining my screws. (Version LV2012).

  Thanks in advance.

  see for yourself:

  

  EDIT:

  And he treats both leap years

• File backup failed. The error is: the parameter is incorrect. (0 x 80070057).

  I get the following error when I run "back up files" and tries to access "backup setting change" (only).

  I tried most option all found on TechNet to see disp.

  No problem running "full pc upwards."

  Log name: Application
  Source: Windows Backup
  Date: 09/11/2011 11:19:55
  Event ID: 4104
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: desktop
  Description:
  File backup failed. The error is: the parameter is incorrect. (0 x 80070057).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4104
      2
      0
      0 x 80000000000000
     
      21308
      Application
      Desktop
     
   
   
      The parameter is incorrect. (0 x 80070057)
      57000780E00400005B0600005C060000420ED1665C2BEE174B64529CB14610EA71000000
   
  

  Help, please

  Phillip

  Hello

  Make the SFC (System File Checker) scan and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

  I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

  Version 6.0.6002.18294

  Day 17/08/2010

  Duration 14:11

  Duration may vary in different time zones.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• could not clean the file history data element not found in windows 8

  My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file.  The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

  Hey Daley,

  If there are errors in your player in the history of the files that need to be repaired, try to repair your disk

  1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.

  2. Tap or click repair.

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Reference:

  What happens if something is wrong in the history of the files?

  Please post back with more information and the status of the issue.

• Photoshop cannot open the file because of a program error

  Hello friends.

  I have a problem with Photoshop CS

  When I open the file it I get the error message: Photoshop can not open the file because of a program error

  How do I stop this error? Please send me something to fix Photoshop.

  Kind regards

  Kevin

  Hey Kevin,

  Uninstall Photoshop, as well as previous CS versions to avoid any interference with your current version. Adobe offers a tool to remove completely all the CS to your computer files. Once you have uninstalled these, reinstall Photoshop and apply the program updates. If it's useless trying Photoshop difficulty Toolbox https://www.fixtoolbox.com/photoshopfix.html

  This application can restore data from all versions of Adobe Photoshop.

  Good luck.

• Drop database connectable to including the file system data sheets files

  I did experiments with the connectable Oracle12c to database functionality and have noticed that when I "drop database connectable to pdb1 including datafiles', I get the message that the database snap-in has been dropped."  I also see that all files in the tablespace for the PDB except the SYSTEM data file have been deleted.

  
  I want to remove the folder that has been used for the pluggable database after that the PDB fell, but cannot because the file SYSTEM data is left behind.

  Is it possible to delete the data file SYSTEM for a pluggable database once he fell?  Or this part forever from the database of the container?

  Thank you

  This forum works on a Server Windows 2012.

  Thanks for the Bug information.  There is no error in the alert.log file, but I found a trace file with:

  ORA-01265: cannot remove the D:\ETC\ETC\SYSTEM01 DATA. DBF

  ORA-27056: could not delete file

  OSD-04024: cannot delete the file.

  S/O-error: (32 OS) the process cannot access the file because it is being used by another process.

  This seems to be the same problem as described in bug 17659954, so I can follow in investigating the recommendations of bug

  Thanks again

• No data found Trigger error (before or after)

  Dear all,
  
  We have the trigger in the database, whenever we try to insert the record in WIP_OPERATIONS, NO DATA FOUND exception was thrown, when debugging we, we have found no problem. The first select statement is getting has not, even if there is the value entered for: NEW.wip_entity_id and when we execute the query separately in the database with the: NEW. WIP_ENTITY_ID, its getting the value. What could be the reason? We cannot use statement SELECT AFTER or BEFORE INSERT trigger? No idea why its NO_DATA_FOUND Exception throw?
  
  CREATE OR REPLACE TRIGGER sdm_brasil_wj_ops_iface_trg
  BEFORE YOU INSERT OR REMOVE
  ON WIP_OPERATIONS
  SEO
  AGAIN LIKE NEW
  OLD OLD
  FOR EACH LINE
  DECLARE
  ln_status NUMBER (10): = 0;
  ln_item_id Number (20);
  --
  lc_txn_type VARCHAR2 (1);
  v_interface_flag VARCHAR2 (1);
  v_err_msg VARCHAR2 (2000): = NULL;
  v_error VARCHAR2 (2000): = NULL;
  --
  lb_insert_iface BOOLEAN: = FALSE;
  --
  lr_discrete_job_ops wip_operations % ROWTYPE: = NULL;
  --
  BEGIN
  
  lr_discrete_job_ops.wip_entity_id: =: NEW.wip_entity_id;
  
  BEGIN
  
  INSERT INTO APPS. The VALUES of XX_TEMP (': NEW.wip_entity_id ' |: NEW.wip_entity_id);
  
  SELECT status_type
  IN ln_status
  OF wip_discrete_jobs
  WHERE wip_entity_id =: NEW.wip_entity_id;
  
  INSERT INTO APPS. The XX_TEMP VALUES ('ln_status' | ln_status);
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  ln_status: = 0;
  v_error: = ' ERR001: NO DATA FOUND - primary item for WJ ID Id: ' | To_char (lr_discrete_job_ops.wip_entity_id): ' = > ' | SUBSTR (SQLERRM, 1, 500);
  dbg_pk.appmsg (1, vn | v_error);
  WHEN TOO_MANY_ROWS THEN
  ln_status: = 1;
  v_error: = ' ERR001: TOO Manu Rows: primary item for WJ ID Id: ' | To_char (lr_discrete_job_ops.wip_entity_id): ' = > ' | SUBSTR (SQLERRM, 1, 500);
  dbg_pk.appmsg (1, vn | v_error);
  WHILE OTHERS THEN
  ln_status: = 2;
  v_error: = ' ERR001: other - of the primary item for WJ ID Id: ' | To_char (lr_discrete_job_ops.wip_entity_id): ' = > ' | SUBSTR (SQLERRM, 1, 500);
  dbg_pk.appmsg (1, vn | v_error);
  END;

  932450 wrote:
  Hi Blushadow,

  Thanks for the reply, even I thought that the select statement is get executed before recording is committed to the database.

  How we can know, determine if the data enters the wip_discrete_jobs table?

  He didn't necessarily need to be committed, but it must have been inserted in the same session.
  The NO_DATA_FOUND error would seem to indicate that the trigger on the table wip_operations is put to fire until the data is inserted at wip_discrete_jobs. We have all your code, we are unable to identify the exact location of the error.

• 'File Info' data can be deleted?

  Hello

  Currently, using FM11 and creation of documents unstructured.  We do custom types, of the equipment and tend to start a new document from an earlier version.  We would like to remove the previous data from 'File Info' and be updated with the current data for the new document.  Remove us the 'File Info' data and save the document, but when opened, the data is always there.

  Thanks in advance,

  WRB

  There is a setting in maker.ini (CopyFileInfoOnImport) that controls whether imported Doc Info fields are copied to or not. It is not documented in the Maker.ini reference Guide.

  If you want that content from another file, or a model that must be explicitly added to the [options] section as "CopyFileInfoOnImport = we." Similarly, if you do not want a model by replacing the already signposted meta-date. You must explicitly set this 'OFF '.

  Also, keep in mind that FM 'merges' content when import it formats, i.e. If the item exists in both files, it is replaced, otherwise, it is left alone.