Adding new hardware to an existing Cluster

Similar Questions

• Adding a new host to the existing cluster

  Hi all

  The existing cluster has a connected SAN. Should what precaution I look forward to add a new host to the existing cluster? I did research that we should physically disconnect the HBA before adding, I don't know what it is to be honest.

  Any help / idea would be highly appreciated.

  Concerning

  VDZ wrote:

  Thanks a lot, guys

  Please, how can one more thing I change the host name?

  Appreciated all your help

  Kind regards

  Hello

  Once the host is already in the vCenter inventory, you cannot change it, you must disconnect host to vCenter, delete the inventory and add it again using a different name,.

  for example, if you specify IP during the connection wizzard, it seems in vCenter inventory under an IP address, if you want it to be visible as a hostname or a domain FULL, during the wizard name you used its hostname or FULL domain name

  See you soon

  Artur

  Visit my blog

  Please, do not forget the points of call of the "useful" or "correct" answers

• Adding a node to an existing cluster

  Hello

  Our project is using Livecycle ES2.5 Patch1 on top of Weblogic.

  Due to some conflicts of locking, to add several servers (such as an urgent solution) cause, we can solve the problem if not soon.

  Then add the new node to a cluster of existing (Weblogic) is a pure Weblogic operations or we do something else on the side of Livecycle?

  Thank you very much!

  Please follow the document below to add a new node to an existing cluster

  http://help.Adobe.com/en_US/LiveCycle/10.0/ClusterWebLogic/WSf674976bd3510660738a11612fd62 b1a3f - 7ffa.html

• Added new photos to an existing building?

  How can I add new photos to an existing building.  I got 300 + photos tagged and imported.  The first version of the book used 87 and is all that now appears when I open the book.  I wish I had the 300 + original photos appear so new can be added to the existing structure.

  Make sure that the book is saved. Return to the library, then drag the other images in the book collection.

• Added new photos to an existing collection

  
  I can't add new photos to an existing collection, because the cursor will not enter the thumbnail. In what must be a related problem, I can't reorganize my thumbnails mode grid for the same reason. How to solve this problem, or at least work around it?

  Thank you

  Is this a case of click the border around the image rather than the image itself real? You can't drag the border. You must click directly on the image.

• Adding new administrator of an existing OnPlus site

  Hello

  I would like to add me to a site's existing OnPlus (device) as another administrator of the site.

  My colleague who already has access to the site, do the steps explained in

  Adding and managing the authorized Agents of the OnPlus Document portal user guide.

  steps to follow:

  Agent-> Agent invite-> send an invitation by e-mail.

  I received the email with the URL.

  I have consulted the URL, entered my information but I get the error message at the presentation: "This user ID is already registered."

  I have an OnPlus account initially, I created, but it is not related to any client.

  If this account is the origin of the problem, how can I delete the account?

  Can you please help?

  Thank you

  Kavi

  Hi Kavi,

  Simply send an e-mail to [email protected] / * / with the Cisco.com ID that you have deleted, associated to this CCO ID. email address one of the team of OnPlus will respond directly by email, and upon receipt of your confirmation email, we will remove the account from the portal OnPlus and send you a confirmation email that what happened. You can then follow the link in the email to your supplied colleague.

  Kind regards

  -mike

• Data Center / Intellegent scheduling / planning company tide Software / Configuration settings when adding new hardware

  Tidal.V621.Suggested.Configuration.Settings.For_.clientmgr.props_. Master.props_.and_.TES - 6xxx.dsp_.jpg

  

  My environment is running v6.2.1.415 tide in Windows.

  Recently, I was able to receive more processors to the computer (and memory) for both servers - the Client Manager and tide Master.

  My environment was not in fact considered environment tide (due to the size of the database), "medium" because of the number of jobs on a daily basis and/or users running clients.

  Looking at the Performance Tuning Guide 6.2.1, she suggests to place some more recent values in three files:

  --

  [1] Master.Props,.

  [2] Clientmgr.props and

  [3]-6.0.0.0.dsp

  --

  But the most funny about this, is that the file-file 6.0.0.0.dsp does not exist.

  Someone at - he had this situation before? How do solve you? (Don't you worry about this?)

  In addition, is the only way the changes - is to turn off the two services, make the changes, and then turn on services?

  Or can I make configuration changes, and then stop and start the two services (master and client Manager)?

  Thanks in advance-

  Hi Dave,.

  The performance guide uses an arbitrary name for the dsp - Data Source Provider / plugin CM. This file is located in your Customer Manager-config-*.dsp

  Backup of all your accessories and all the PSD files. It is best to stop the Client Manager, and master, make configuration changes, then launch Master, then the Client Manager. Online changes don't usually end up too well.

  Kind regards

  The Derrick

• Adding new hardware to finish DVD

  A few years ago, I finished a project using first item 7, he engraved on DVD and then deleted all the files from my hard drive.  Now, I want to add more material to this project.  How to import the material of the DVD in the program?  Does it matter what first version I have?  I tried to import just off DVD, but nothing really usable.

  jandr74

  You should be able to work with VOB video files and do not have to be converted to MPEG or something else prior to importation in first Elements 7 on Windows 7 or 8 64-bit.

  If you are running on first Elements 7, set the project preset in the new dialogue project NTSC DV Standard or NTSC DV Widescreen (depending on whether your DVD-VIDEO is standard 4:3 or standard screen 16:9 wide). For now I guess your first items is a NTSC system. Then use the Get Media / ' DVD (camcorder or DVD from PC Player) "/ 'Adobe Premiere Elements - Media Downloader (Advanced dialog box)'.

  You should be able to get good results with first Elements 7. If we cannot resolve the problems with 7, then, as a troubleshooting tool, you can watch the free 30 day trial of version 12 for this task.

  Now regarding this flashing video...

  you select only the VTS_01_1.VOB in the Adobe Premiere Elements - Media Downloader (Advanced dialog box) to align with the project. You should not take anything else. Menu VOB (VTS_01_0.VOB) sees in the Premiere Elements - Media Downloader should not hold the project.

  To be sure vs 4:3 16:9, let's do it... Set the project preset to NTSC DV Standard. Once you get this VTS_01_1.VOB in chronology, in project media, right-click the thumbnail of the file and select Properties. If, in properties, see pixel aspect ratio = 0.9, then we are OK with the NTSC DV Standard predefined project. But, if you see 1.2, so you have it widescreen and the need to start a new project with the project preset DV NTSC widescreen value.

  See what looks like all and then we'll decide what next.

  Thank you.

  RTA

• Adding new hardware that is listed in the HCL

  I want to add a network adapter that is listed in the HCL to the ESX 4 server, esx install this card automatically for me?

  Yes, if it is supported, it must see the new card at startup and install the driver module without further interaction.  Just go to Configuration | Network cards to confirm that it is there.  Caveat would be if there is a specific need driver disc (not common but possible).  Who should be spelled when you view the map in the HCL, look for exhibitor numbers or click on the list of the map.

• Cannot install new hardware.

  It is a very weird problem...

  All computers are Windows XP with SP3.

  I can't install new hardware on computers.  When I plug in a USB keyboard or USB drive, the computer detects it and adding new hardware pop-up... and every time Assistant and he told me he can't install the new hardware.

  I tried with several (work) keyboards, mouse, external hard drives, flash drives all with the same result.

  The keyboard and mouse that are currently connected to the computer very well - work however, if I unplug and plug it into another USB port, they stop working too (probably because they are recognized as new hardware for Windows at this time), until I plug them into their original USB ports.

  In the BIOS, all new and existing keyboards work fine.  I also started a live CD of Ubuntu and all existing works and new material perfectly well there too.

  I uninstalled the USB devices from Device Manager too, but there is no change.

  I connected a PS/2 keyboard, which works fine in the BIOS, but then when I get into Windows, it stops working like the rest nine.

  I tried to start safe mode, but no change is.

  And Yes, I am an administrator on the computers.

  On one of the computers I tried to do a repair of Windows by using the Windows XP CD.  I am able to boot from the CD and select start Windows repair.  However, when I get to the part of the facility where you can only select your language, NO keyboard or mouse work, and I'm totally stuck at this time.  Then I had to do a clean install of Windows on this computer, and everything's fine.  But I can't really do it to my other computer.

  I don't know what else to try.  Any suggestions are appreciated!

  Hi BatmanBob,

  • You have security software installed on the computer?
  • Do you have a group policy on the computer?

  Step 1

  You can also try to temporarily disable the security software of the computer and try to install new hardware and check if it installs. If you are able to install, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

   

  Step 2

  You can also put the computer in a clean boot state and check if any third-party application blocking installation of the equipment and try to install the drivers in a clean boot state. Access the link below and follow the steps to solve a problem by performing a clean boot in Windows XP.

  http://support.Microsoft.com/kb/310353

  You can also communicate with the system / network administrator to check if there is some group policies for installing the drivers and change it.

  If you are still having the same problem after following the steps above I suggest you to send your issuein the TechNet community, given that the computer is on a domain network. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add new host esxi 5.1 for the existing cluster of vcenter

  Hello

  I would like to add a new host Virgin esxi 5.1 to an existing cluster from the vcenter. What are the things that I have to preconfigure on the host before add you it? I configured the network already, storage will be implemented when I add it to the cluster, right?

  So, what I ended up doing was just set up time, networking and dns. I then added the host while he was in maintenance mode. I have a Compellent SAN storage and im using a folder in compellent to map all my Lun, then I can just add a new host in this folder, and it will automatically map all volumes to the newly added host once I go into vmware and make a new analysis on the FC HBA host (do FC fabric SW zoning first of course). I then added a file .locker on one of my SAN LUNS scrach location/newspapers. She's.

• ESXi 5.1 cluster moving to new hardware

  I have a 5.1 ESXi cluster consisting of 2 servers of Sun I want to retire - Sun #2 is the best of the 2 servers.   I all 2 new Dell R620 stretched upward, wired and pre-loaded with 5.1 U1.  My license is for 4 and vCenter is a virtual machine in the cluster, I want all moved to new hardware with little or no interruption of service.

  This would be the way to go?

  1. set up Dell and storage server configuration networking properly (I am comfortable with this part).

  2 migrate all virtual machines to Sun 2.

  3. close the Sun 1 and remove the cluster

  4. Add 1 Dell to the cluster

  5 move the VM to Dell 1

  6. switch off the Sun Deceiver 2 and remove the cluster

  7. Add 2 Dell and move virtual machines as you wish.

  Sun servers were not identical, then the VCA mode is Intel "Penryn".    The specs say that future Intel processors can join to this group, so it is not a problem running 1 Dell and 1 Sun temporarily, correct?  The r.620 are the same, so as soon as they are both in the cluster can / disable CVS mode?    I have to restart each VM later so he would see the new processor features, correct?

  Is this what I need to look at.

  Thanks in advance for your answers.

  You can do a lot of ways, but I would recommend not to remove the beam #1 sunlight until you are 100% made to the migration. Which leaves you exposed from the point of view HA (assuming that it is production, since you want little downtime), and is an unnecessary step. RELATIVE to the issuance of licenses, since this is a migration of right, keep the r.620 in eval mode and change the licensing of more later. Which allows to rotate the environment MUCH easier.

  Here's what I'd do (emulation of your list)

  (1) Networking Setup / storage on r.620, to be compatible with the old SUN servers.

  (2) to present the cluster r.620

  (3) to migrate a low priority / test VM networking, testing vMotion and new hosts.

  (4) to migrate most of the virtual machine the new hosts.

  (5) migrate vCenter last VM (just to be safe)

  (6) put SUN 1 and 2 in maintenance mode. Leave them in the cluster for a few days just in case

  (7) remove SUN 1/2 cluster once everything works well, remove the former hosts of vCenter and closed. Clean a network configuration and storage, respectively (be careful here).

  (8) stimulus EVC Mode at the highest level appropriate (Sandy Bridge, I guess).

  (9) it is important, read closely. If you want to increase the level of CEV, after former guests are completely gone and dead, completely off each VM, a power back on. This will raise the functional level of CVS to the new level. Simply restart the guest OS won't do it. You can check by going to display hosts and clusters > VMS > add column EVC.

  Jon

• How can I move my existing WHS-2011 installation to new hardware?

  I have the OEM software that I used for the current installation and I was wondering if I could use the same software (and product key) to install on the new hardware.

  Hello Jrf_21,

  I suggest posting your question on the official Windows Home Server forums located here:
  http://social.Microsoft.com/forums/is/whs2011/

• How to add a host to an existing cluster of ESX?

  Good evening

  
  

  I was responsible for adding a new HP Server as an additional host to an existing cluster of ESX4.1.

  Now, please excuse my ignorance if this seems to be a simple task to some of you. I don't have experience in this field and want to make sure I have all my bases covered. Please someone would be kind enough to please guide me through this step by step.

  I have an idea of basic, do not want to miss something.

  Concerning

  Hi Bryan777,

  Welcoem to the community.

  Please follow link below, if you need anything else please let us know.

  http://www.youtube.com/watch?v=W78shNXw5h8.

  If you don't succeed the first time. call it version 1.0. "

• Displacement of vCenter Server to new hardware and start from scratch

  Hi all

  I want to configure a new server vCenter Server on new hardware and start from scratch instead of migrating from the old installation.

  Threre are currently only 5 ESXi hosts connected to this server vCenter Server, so it would not so much be working to the reconfiguration of the new facility.

  I wonder if there are other things that I have to take care of? How about iSCSI, network settings and so on?

  Thanks in advance,

  Andreas

  It is no big problem with a new server vCenter Server. Just follow the step to a new clean install.

  Existing hosts will be simple automatically deleted when you add to the existing VC they to the new cluster.

  Please keep in mind that the DNS entry are correct.

  If you have a HA, so I suggest to disable in the old cluster (it will be configured in a way to the new).

  If you have CVS you add hosts when are in maintenance mode.

  André