Adding new instances of data in the Grid control

Similar Questions

• Adding or several new rows of data to the DataGrid control

  My requirement is to provide the ability to add a new line to the data grid when the tabs off (the last cell of the last row of the data grid. I did my editable datagrid and in 'itemEditEnd' Manager I'm adding a new object (with empty values) to the data provider for the grid and setting focus to the grid and then by setting the new row index as the Index selected for the grid. None of this activation itemEditor for the first cell of the new row.
  
  I saw somewhere that sending the itemEditBeginning will do for me. But do not know how to proceed. Appreciate if you can point me to an example of woring sample.

  Set the editedItemPosition on the grid property. That should do it.

• Adding new listener Console Console of the grid

  Hi I'm running 11 OEM, and I created a new listener Strawberry that was not discovered by the OEM. I tried target, refresh, but in vain. Is it possible to add a new Stanley OEM please.

  You can go two directions for this:

  Navigate to Configuration - Agents
  Select the Agent that is installed on the host computer, you created the listener

  1)
  Select Add Listener and press [Go]
  Enter all relevant data of Listener

  2)
  Select Add an Instance of database [GB]
  This will activate the detection of target on your host and can detect the presence of your listener.
  Complete the discovery with the listener select single and press [OK]

  Concerning
  Rob
  http://oemgc.WordPress.com

• Query regarding different refreshing data from the grid when returned from a workflow

  Hi Experts,

  JDEV version is: 11.1.1.5

  Our application uses dynamic tabs the user interface shell.

  Whenever the user connects, it is taken in A TAB.

  Since the TAB A, the user navigates to TAB B.

  TAB B has a GRID B(table with a few records).

  Column A on TAB B has a hyperlink which, once clicked on will open a stream of different tasks in a different tab.

  Click on the column of hyperlink for the different lines will open different tf (under certain conditions).

  By clicking on the hyperlink, that the method _launchActivity(String title, String taskflowId, boolean newTab) is used, which the TF open in a new tab.

  The user works on the TF (in a new tab) which opened on click of a hyperlink in the column is and click on SAVE.

  Click to save some operation and removeCurrentTab method is called which will close the current tab, and control passes to the first tab (TAB A).

  The problem:

  Once the user tries to click or to return to the TAB B the WHAT GRID B is never updated that we cannot get the descriptor to refresh the data in the grid.

  Any suggestions would be much appreciated.

  Thank you

  Jean Claude

  huh, I thought it was another library in question.

  In all cases, you can use contextual event (when you close the current tab).

  The second option is to navigate to the method executeQuery by code call activities:

  https://blogs.Oracle.com/jdevotnharvest/entry/how-to_navigate_in_bounded_task_flows

• new agent is not displayed in the grid control

  I got 10.2.0.1 agent registry in the grid control 10.2.0.4.
  
  I remove agent from grid control OEM target GUI interface. remove the home directory of the agent on the target computer,
  can I install a 10.2.0.4 target agent on the computer, but this did not appear in the OEM grid control. Why?
  Thank you.
  
  Oracle2@bclabdb02:/Clusterware/Oracle/agent10g/bin > emctl agent status
  Oracle Enterprise Manager 10g Grid Control 10.2.0.4.0 4 Release.
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.4.0
  Version of the WHO: 10.2.0.4.0
  Protocol version: 10.2.0.4.0
  Home Agent: / clusterware/oracle/agent10g
  File binary agent: / clusterware/oracle/agent10g
  Agent process ID: 16470
  Parent process ID: 16454
  Agent URL: https://bclabdb02:1831/emd/main /.
  URL of repository: https://bclabdb03.smc.ads:1159/em/upload
  Starts on: 2008-10-11 21:11:43
  Started by user: oracle2
  Last reload: 2008-10-11 21:17:49
  Last download successful: 2008-10-14 11:47:30
  Total megabytes of XML files uploaded so far: 40,36
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 39.20%
  Last pulse in SGD: 2008-10-14 11:51:01
  ---------------------------------------------------------------
  Agent is running and ready

  performance agentca d AOH\bin and still not working, paste the targets.xml

• Planning of a work of export using the Grid control

  Hello
  
  I had an obligation to schedule tasks for export in Oracle Grid Control 10.2.0.5 (Windows). Is this possible and have each done this? If so, please share the steps. The idea is to receive alerts when a job fails.
  
  Thank you.
  GB

  Here are the easy steps (there could be some slight differences as I'm posting screen of 11 g-based)

  1. the grid control console, click on the relevant database

  2. click on the tab "Data Movement.

  3. click on "export to export the files.

  4A chose the export type (Database / Schema / table / Tablespace)

  5. provide credentials to the host (OS user name and password) and click on "continue". You will get a new screen called ' export: Options

  6. click on the box called 'Generate a log file', and then select the directory object where you want to create the dump files. (You must create a database directory object, if you do not)

  7. choose the option that you required the content, then click on ' * following *'. You will get a page called ' export: files

  8. Select the directory object in the drop-down list and provide a name of filename format and click on "next".

  9. here provide you the job name and description, and chose repeat options (daily, weekly, etc.) and click "next".

  10. you will get a summary screen called ' export: Annex "." Review the details of your job and click 'submit '.

  It's the solution, and it works well.

• Notification of the Grid control for tablespaces

  With grid, we have a basic rule of data availability generated control system and critical States include the use of Tablespace.
  
  If we want to customize the rules, we are not ablke to select a part of a Cluster database tablespace. Apparently because of the target type we are not able to select a table to a Cluster database space.
  
  I have created a new settlement with a Cluster database as the target type and include the Tablespace metrics but no e-mail is sent. (Email notification is on and everything critical level, warning, clear and also all the State of corrective measures).
  
  If someone has any idea on this subject?
  
  Our notification based on the Grid control, but apparently, we are not able to be notified for cluster database tablespace usage.

  Enterprise Manager

• Retention policy for the grid control

  Hello

  One of our clients wants to change the retention policy of the Grid control to 2 years in order to check the statistics of the application of these last 2 years,

  Default purge policy is as follows:

  Raw metrics - 7 days

  An hour aggregate metrics data - 31 days

  A day aggregate metrics data - 365 days

  Having someone of you will never change these default policies to a great values?

  I'm afraid of performance issues

  Depends on what policy they want change, but I n ' tthink this will help you at all.  If they are looking for AWR data, it is not stored in MS, unless you configure CWA warehouse.   EM will be measures such as SQL response time, but it does not store the SQL query and the stats you'd see in an AWR report.   Storing so for 2 years will not help.  If you want just generic performance history, then changing strategies of purge will be fine, but you don't want to store the raw data for 2 years. Keep in mind that you will increase the size of your repository database as well.

• Control of the database and the grid control

  Hello
  
  I installed Oracle 10 g DB and configure its control of DB. Then I added this database as the target of OEM Grid Control.
  
  My question is: after you add the database as a target for the grid control, be it still controlled by the DB control and the grid of the company control?

  It's good questiion Yes this will be monitor by both, please check both console and see

• Cannot start the grid control

  Hello
  
  I got the grid control Setup on a server laboratory almost a year back and everything worked very well.
  a week back from the developer could not access the URL.
  
  
  While I try to start the services, I get the following error:
  
  xvmdsxaor03: / opt/oem/oms10g/opmn/bin >. / opmnctl startall
  opmnctl: from opmn and managed all process...
  =========================================================================
  opmn id = xvmdsxaor03:6200
  0 out of 1 process started.
  
  IAS instance-id = EnterpriseManager0.xvmdsxaor03
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  IAS-component/process-type/process-set:
  HTTP_Server/HTTP_Server/HTTP_Server
  
  Error
  -> Process (pid = 1382)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / opt/OEM/oms10g/opmn/logs/HTTP_Server ~ 1
  
  xvmdsxaor03: / opt/oem/oms10g/opmn/bin > 10 g/opmn/logs/HTTP_Server ~ 1
  ========================================================================
  
  
  According to the newspapers:
  ========================================================================
  06/09/23 07:59:55 start
  --------
  apachectl does not belong to this user
  ========================================================================
  
  I checked for .apachectl and its property by the same user "oraoem" that I m starting services with. I'm not sure what is causing this problem:
  
  [root@xvmdsxaor03 bin] # ls-l .apache *.
  -rwsr-s - 1 oraoem s/n 1716966 5 August 2005 .apachectl
  [root@xvmdsxaor03 bin] # pwd
  / opt/OEM/oms10g/Apache/Apache/bin
  
  Please notify.
  
  Thank you!

  What are you user to use 'startall opmnctl?

  Ok...

  Please...

  $. / opmnctl stopall

  $ ps - aef | grep oms10g

  And then if find some process... Kill it to superuser.

  # kill-9 ID_processus

  OR (be careful)
  # ps - aef | grep oms10g | AWK '{print $2} ' | XARGS kill-9

  Go to/opt/oem/oms10g/Apache/Apache/logs PATH

  # cd/opt/oem/oms10g/Apache/Apache/logs PATH

  Check the file httpd.pid

  # ls - the httpd.pid

  It must not be permission oracle, don't mind... verification process and remove

  # ps - aef | grep 'cat httpd.pid '.

  If find... kill

  # rm f httpd.pid

  Oh apachectl file (it is owned by oracle)

  -rwx - 1 oracle oinstall 12615 10 May 2007 apachectl

  After that the oracle Goto user, and then use 'startall opmnclt.

  $. / opmnctl startall

  and check the log

  Good luck

• strange behavior in the planning of a script in the grid control

  I have a script that works fine when I run it manually and through cron.it datapump exports.
  I created jobs in the grid as operating system command and control as a script of the os type.
  However when I schedule it's running in the grid control as a task, the task has failed
  .sh: line 17: 4274 Abort (core dumped)
  
  It exceutes all the lines of the os script except core dump/abort (line 17) which is
  $ORACLE_HOME/bin/expdp
  
  **********************************************************************************************************************
  
  Grid control is 11 GR 2 and it's on Solaris10.
  
  

  It depends on what shell you use.

  Please try

  LD_LIBRARY_PATH_64 =""

  Export LD_LIBRARY_PATH_64

• Upgrading repository database for the grid control 10205

  Hello
  
  I have the following problem: we took the grid control 10205. It was an upgrade of 10203. By default, it runs a repository 10104. Now I have to spend this repository to 10205 version too. I need to do because this grid control runs on ELinux 4 and we want to improve this ELinux 5 machine, but in the database of ELinix 5 10105 Certification Matrix only is not supported.
  
  Now my question:
  
  To perform this upgrade, I've read that I must first install Database 10205 Software in a separate House and then upgrade the database with the repository. CMS and the repository database are installed in separate houses. Are these references in OMS to host the repository? What should I do after I upgraded the database repository?
  
  Unfortunately I'm not able to find something about this in the Documentation. Everyone speaks of upgrade of WHO and almost nothing on the database repository.
  
  I'd appreciate a lot of the advice.

  Salvation;

  Have you checked the following note:

  How to level a 10.1.0.X or a repository database for Grid Control 10.2.0.4/5 10.2.0.X to a Version 11.1.0.X database [399520.1 ID]

  Respect of
  HELIOS

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• Request for the GRID CONTROL

  Hello
  
  I use Oracle version 10.2.0.1.
  
  I want to install the GRID CONTROL on the top of this facility. For this I install OMA (Oracle Management Agent) first.
  
  My query is, can I straighaway install AMO on Oracle database version 10.2.0.1 10.2.03 version? Or do I need to patch first the version of oracle database 10.2.0.1 to 10.2.0.3 base then only I can install version 10.2.0.3 on AMO.
  
  
  Thanks in advance.
  
  Concerning
  
  Published by: user12302569 on Sep 9, 2010 16:56

  user12302569 wrote:
  Hello

  I use Oracle version 10.2.0.1.

  I want to install the GRID CONTROL on the top of this facility. For this I install OMA (Oracle Management Agent) first.
  My query is, can I straighaway install AMO on Oracle database version 10.2.0.1 10.2.03 version? Or do I need to patch first the version of oracle database 10.2.0.1 to 10.2.0.3 base then only I can install version 10.2.0.3 on AMO.

  Yes, you can install OMA and I suggest you to install the agents of 11G because they are now available and have additional options. Version of the agent does not depend on the version of database. An agent can monitor all the Oracle database versions (depending on the version of the agent).

  For the certification of the official follow-up of targets, see note MOS:

  Auditor Certification Oracle Enterprise Manager Grid Control [ID 412431.1]

  What is your version of SGD also?

  OMA officer does not autonomous and you need to have an OEM grid control installed before you install the agent on a target server.

  For OEM grid, please see:

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/index.html

  http://www.Oracle.com/technetwork/OEM/grid-control/documentation/index.html

  Concerning
  Rajesh

• Filtering XML data in the grid

  I can't sem to figure out how to filter my XML data before entering my data grid. I want to load only the XML data with the ID 'BALUSTER' attribute and have tried to enter:
  
  data_grid. DataProvider dp =. (@ID IS 'BALUSTER');
  
  in my function xmlLoaded without success.  I'm fairly new to as3 and could certainly use the help.  Thank you.
  
  var dpataProvider;
  var products_xml:XML;
  var xmlReq:URLRequest = new URLRequest("data/products.xml");
  var xml_loader:URLLoader = new URLLoader();
  
  function xmlLoaded(event:Event):void {}
  var ldr:URLLoader = event.currentTarget as URLLoader;
  var xmlDP:XML = new XML (ldr.data);
  DP = new DataProvider (xmlDP);
  data_grid. DataProvider = dp;
  }
  
  xml_loader. Load (xmlReq);
  xml_loader.addEventListener (Event.COMPLETE, xmlLoaded);

  Assign the filtered data (not the original) to the data provider:

  function xmlLoaded(event:Event):void {}
  var ldr:URLLoader = event.currentTarget as URLLoader;
  var xmlDP:XML = new XML (ldr.data);
     
  var data: XML = ;
      data.setChildren (xmlDP.PRODUCTS. (@ID) IS 'BALUSTER'));
     
  DP = new DataProvider (data);
  data_grid. DataProvider = dp;
  }