Adding RAM to HP Touchsmart laptop 14-b109wm (REF E0X70UA)

Hello!

I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

Thank you in advance.

Rich

RichFla wrote:

Hello!

I need to update my RAM on my HP Touchsmart laptop 14-b109wm.  I'm on a virtual OS on my laptop via Hyper-V. In doing so, I'm running out of RAM available. I find myself trying constantly to adjust the amount of RAM in my virtual Session. I think that the ultimate solution is to upgrade the RAM.

Currently, my laptop has 4 GB of RAM installed, provided with the laptop.  My questions are; the laptop comes preinstalled with one or two modules? Should what modules I buy to get a maximum of 8 GB installed? How to install the RAM modules in this laptop model?

Thank you in advance.

Rich

Hi RichFla

It's your product user guide. Here is your product specifications.  It's your place of originprodut.

You can upgrade up to 8 GB maximum. There are 2 slots available to customers & you can buy an identical plus 4 GB of RAM to upgrade both can act as configuration double track for better performance.

Regarding the frequency of the RAM, the user guide gives no reliable information for Celeron processors. In order to better you find system through BIOS setup Diagnostics soon after off the laptop.

See Page 66 Chapter 5 removal and replacement of the procedures of the user guide & you can see that, for installation of memory you need to remove the motherboard of the system. It's better to give you the nearest service center HP for the upgrade because they have all the necessary tools.

Thank you

Visruth

Tags: Notebooks

Similar Questions

  • 15 - f215dx: 16 GB of ram will work for laptop HP 15-f215dx

    work 16 GB of ram for computer HP laptop 15-f215dx here is the link of ram I want to buy this laptop Kingston HyperX Impact black 16GB (2x8GB) Kit 1600 MHz DDR3L CL9 SODIMM laptop memory (HX316LS9IBK2/16) 1.35v https://www.amazon.com/dp/B00KQCOV5C/ref=cm_sw_r_other_awd_8W02wb1WB1D17

    Refornm

    Hello;

    Let me welcome you on the HP forums!

    I read your post on adding RAM to your laptop and wanted to help.

    Unfortunately, the max RAM it can handle is 8 GB.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Mac Pro early 2008 adding ram problems

    I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

    Ron

    How are new?

    Where have you bought the new?

    All new are identical?

    All the 'old' are the same?

    What is the size of the old and new?

  • Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

    Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

    Hello

    Please use the part number and procedure on page 38 of the following guide:

    http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

    (Note: same procedure for s1xx machines).

    Kind regards.

  • Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

    Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

    You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP 15 r204ne: r204ne 15 hp ram slots how this laptop has one or two

    When I checked my ram I found only 4 GB
    Now I want to upgrade my ram
    Is that my laptop (hp 15 r204ne) has one or two slots of ram and what is the maximum memory I can update in every situation

    My operating system is Windows Home Edition unilingual 64 10 x

    Thank you

    Here are a few selected information from the Service Manual that answers your questions;

    housing for module customer accessible/upgradable memory 1 or 2 (depending on model) 2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)

    2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)

    Supports up to 16 GB of RAM in the following configurations: 16384 MB total system memory ● (8192 × 2)

    If you have 2 slots and can install 2 x 8 gigabytes of memory to laptop DDR3L-1600 yours is a "Core" (i5).

    HP recommends 8 module in concert:

    Module (PC3L, 12800, 1600 MHz) memory: 8 GB 693374-005

    Kingston sells this compatible memory:

    http://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8&QID=1456265312&SR=8-1&keywords=693374-005

    However, upgrading memory is considered possibly a procedure of "Authorized Service Center only" (the manual is inconsistent on this) and is not easy to do in all cases. It would also potentially negate your warranty, but it is not 100% certain, either. Here is the manual and memory installation is completely up to the 75 percent. It would require removal of the motherboard, we will tell you.

    Your repair manuals

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

    Hello

    After adding RAM 48 MB on my HP2300DN, on the control panel appear 'uninitialized disk '.  I tried to do a cold reset and replace DIMM Slot2 and Slot3, but without success.  Any help would be really appreciated.

    Specifications:

    Printer: HP LaserJet 2300DN

    1 DIMM Slot:

    Side 1: 8 MB Flash

    Side 02:48 MB of SDRAM

    DIMM location 2:

    Side 1: 1 MB of ROM memory

    Side 2: empty

    DIMM location 3:

    Side 1: 8 MB Flash

    Side 02:48 MB of SDRAM

    EIO 1: HP JetDirect J4169A

    RAM DISK storage: 45Mo

    FLASH storage capacity: 3 MB capacity

    Total memory 96 MB

    Hard drive: No.

    Model number: Q2475A

    Dmitry

    You probably confuse the printer. You seem to be using 2 DIMMS that are 48Mo and each also 8 mb flash. These chips contain the firmware in the flash section and the memory in the other. Since you're probably using a chip LJ2300 another dimm, you confuse the printer with 2 firmwares. You must use a barrette of memory 32, 64 or 128 in the 3rd slot. Only 1 chip 8/48 MB can be used in this printer.

  • Flickering screen 17 Alienware r3 after adding ram

    I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

    I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

    Any help is appreciated!

    Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

  • Inspiron 530 - adding RAM

    Hello

    I want to buy a memory to my inspiron 530! Here > http://accessories.euro.dell.com/sna/category.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&category_id=4325&mfgpid=1226170&chassisid=-1<- the="" 1="" gb="" module="" (28="">

    I read on documentation (http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857) when I install memory I need to remove the PCI Express x 16 card... I don't understand. I thought adding ram was simple and all you had to do is open the case, insert the ram and secure them correctly and then close the case. Start the pc and it's done.

    I know that my inspiron 530 can have only 4 GB of ram. I have 2 GB of ram for now.

    Is there something I need to know? Is there something different?

    Dell is not offering Win7 drivers for this model. I suggest you go here and read some of the links on the upgrade to Windows 7. Run the Win 7 Upgrade Advisor first to see what it says on your system.

    Without knowing what equipment you have (for example, video card, sound card, network adapter, etc.), it is impossible for anyone to tell you exactly what drivers you need. In some cases, but not all cases, Vista 64-bit drivers can work. The Vista 64 drivers are here. (Confirms that he says again Vista 64-bit upstairs when you load the page!) And if you use your Service tag (do not post here!) you can find a list of drivers installed Dell, so at least you will know what hardware you have, but keep in mind these drivers for Vista 32 bit.

    You can also go here for links to the hardware and instructions to install Win 7. And you can search these forums for discussions on installing Win 7 on the Inspiron 530 to see which other users may have met problems.

    Ron

  • Allocate more RAM for integrated graphics - HP Pavilion 15-n225nr TouchSmart laptop

    Hi, I have a HP Pavilion TouchSmart 15-n225nr Notebook PC, which is optimal for workloads but (A10 2.10 GHz AMD quad-core processor, came with 8 GB of ram and 750 GB HARD drive), however, recently tried to make a few games but this laptop has an intgrated GPU. I read that the upgrade of RAM will do not much but I ordered a second card of 8 GB of ram, because I want to increase the framerate by every single FPS I can ge and I'm coming soon, so I'll have 16 GB of RAM and the fact he'll be dual channel is a more. I have also read that by upgrading the RAM you can upgrade the amount of ram used by your integrated gpu because there will be more RAM available for use. I don't know if by upgradinng the RAM VRAM happen automatically or if I'll be able to do it manually, I read that you can do it via the BIOS, I don't know for shure if possible.

    So, is it possible to increase the fraction of my RAM than my integrated graphics card uses?, if yes, how?

    If it is not possible to what can do to increase my FPS on the game?, because I can't change a dedicated GPU because it's a laptop.

    Thanks in advance for any help.

    According to the specifications of your computer, to graph total 4195 MB memory is the maximum that can be used. Regardless of the amount of dedicated, is all that can be used as memory dedicated. As a general rule, Windows controls the amount of memory used by the video card. This means that you will not be able to change the settings in the BIOS that will change this option. This isn't a computer class in the game and you expect too much of him.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • adding ram to touchsmart - office or not?

    I just bought a HP Pavilion 21-h116 TouchSmart all-in-One desktop PC with 4 GB of RAM. It is new but very slow operation and I want to add more than at least 4 GB of RAM.

    I understand that there is a difference between SDRAM buffered and unbuffered.  Can advise you on what I would buy to add to my PC?

    It will work - http://www.amazon.com/Crucial-PC3-12800-Unbuffered-240-Pin-CT51264BA160B/dp/B006YG89Q6/ref=sr_1_1?ie...

    Thank you

    You are the very welcome.

    Yes, even if your PC is technically classified as a desktop PC, to be able to keep it so thin and light, to use certain components of the laptop.

    Thus, it uses memory (SODIMM) designed for laptops. It is much smaller in length than the memory Fund and is installed in a carrier of a different type, so it rests flat instead of stick up as does conventional memory desktop.

    If you want to buy another brand of memory, it is fine.  Just make sure it's portable computer memory, has 8 small black briefs from each side of the PCB, non - ECC, Unbuffered, and PC3-12800.

  • Upgrade ram on a computer laptop hp touchsmart 15-r008na

    Just bought laptop computer object for my daughter but would like to know if I can upgrade the ram to run faster. Thank you.

    Hello

    The following link shows its specifications:

    http://WWW8.HP.com/UK/en/products/laptops/product-detail.html?OID=7264803#! tab = specifications

    It has 2 RAM slots, there currently 1x4Go what does the quick option: Add 1 more than 4 GB of RAM in the second slot. There are a few manuals for " Maintenance and Service of Guide " at the following link. Manuals will show you how to access the RAM slots to add/replace RAM:

    PC series portable TouchSmart HP 15-r000

    Kind regards.

  • Problem adding RAM on HP Pavilion TouchSmart 15-b129wm Sleekbook

    OK, so I have a 4 GB stick in there from when I bought the laptop, but I thought to add more so I got some crucial. Unfortunately for me, it is not a 'door' bit convenient for me to open to access the RAM, so I have to take everything... from ahead. For the first time I put in RAM, I kinda had to put a force on the subject, you know (first time ever put RAM in a laptop), but the metal little clamps on the sides don't click so I just opened the pliers, put it in there then their closed. I said "well I hope that it works" and good thing the computer turned on and everything but when I went to the system (I have Windows 8) they say I have only 4 GB installed. I took it apart again (pain in the ass, you mind) and went out of the RAM and once more tried with the clamps snapping, of course, has not. So I decided to do the same thing and who knows what happened? THE SAME THING. OK now I'm checking the BIOS as well and he also says 4 GB so now I'm here. Please help me: c

    Data sheet:

    AMD A6 (~2.1 GHz) processor

    AMD Radeon

    15.6 screen "

    Windows 8

    4 GB of RAM (Dang it)

    Hello

    Please check if you have checked these:

    Manual: http://h10032.www1.hp.com/ctg/Manual/c03660406.pdf

    Through 2, 17 - page

    Config of RAM to use: DDR3L PC3L - 12800 1600 MHz SODIMM SDRAM

    The memory stick of low power AMD A6 accelerated processor - 4455M is of type DDR3 'L '.

    There are two slots, so you can put an another 4Gigs with the same configuration you have (e.g., ditto config), same brand would be ideal.
    Download, run this tool to know the details of RAM already present: http://www.cpuid.com/softwares/cpu-z.html

    Product details - http://support.hp.com/us-en/document/c03900498

    Go through the Page 49, 50 in the manual of replacement procedure-
    You have to get out of the motherboard to upgrade RAM it seems.
    Better communicate with HP or guy local tech since you are doing it for the first time. I do not my own, if I'm a beginner in the present.

    Concerning

    Visruth

  • TouchSmart IQ518a: Touchsmart IQ518a can cause added RAM?

    My Touchsmart IQ518a installed 4 GB memory. The card says:

    Thanks - seems obvious, but the user documentation has instructions on how to add memory and I bought with the specifications of base, so thought I would check.

  • Satellite S50T-B - adding RAM and swapping HDD to SSD

    Hello

    I recently bought portable satellite S50t-B and have a few questions about the upgrade:

    1. What is the recommended RAM to add (8 GB)

    2. What is the DVAR to add?

    3 are there instructions for adding more RAM and an SSD for my laptop?

    4. I void my warranty by installing more RAM and exchanging the current hard drive for an SSD?

    Thank you for your help

    Can you please send name of full model of your laptop? (S50T-B-xxx)

Maybe you are looking for