adding ram to touchsmart - office or not?

Similar Questions

• LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

  Hello

  After adding RAM 48 MB on my HP2300DN, on the control panel appear 'uninitialized disk '.  I tried to do a cold reset and replace DIMM Slot2 and Slot3, but without success.  Any help would be really appreciated.

  Specifications:

  Printer: HP LaserJet 2300DN

  1 DIMM Slot:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  DIMM location 2:

  Side 1: 1 MB of ROM memory

  Side 2: empty

  DIMM location 3:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  EIO 1: HP JetDirect J4169A

  RAM DISK storage: 45Mo

  FLASH storage capacity: 3 MB capacity

  Total memory 96 MB

  Hard drive: No.

  Model number: Q2475A

  Dmitry

  You probably confuse the printer. You seem to be using 2 DIMMS that are 48Mo and each also 8 mb flash. These chips contain the firmware in the flash section and the memory in the other. Since you're probably using a chip LJ2300 another dimm, you confuse the printer with 2 firmwares. You must use a barrette of memory 32, 64 or 128 in the 3rd slot. Only 1 chip 8/48 MB can be used in this printer.

• 10.11.6 and Microsoft Office is not well

  Since the upgrade to 10.11.6, Microsoft Office does not work on my computer. I use Outlook and Excel almost everyday as well as Word and Powerpoint, and none of them will start even on my computer. Try to open the program a pop up comes up saying that the application cannot open and can be a developer issue. Everyone knows about this problem?

  I have a Mid-2012 13 "MBP, i7 2.9 GHz, 16 GB RAM

  What version of office?

• My office does not send signal to monitor

  HP Pavilion a6200t and Desktop HP vp17 monitor

  My office does not send signal to monitor. I use the monitor to another computer it works fine.

  Problem 3 months ago.
  I clean the inside of the desktop with the compressed air bottle.

  Very important, I clean the contacts of the RAM with a cloth of cotton soaked in 95% alcohol.

• Flickering screen 17 Alienware r3 after adding ram

  I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

  I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

  Any help is appreciated!

  Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

• Inspiron 530 - adding RAM

  Hello

  I want to buy a memory to my inspiron 530! Here > http://accessories.euro.dell.com/sna/category.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&category_id=4325&mfgpid=1226170&chassisid=-1<- the="" 1="" gb="" module="" (28="">

  I read on documentation (http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857) when I install memory I need to remove the PCI Express x 16 card... I don't understand. I thought adding ram was simple and all you had to do is open the case, insert the ram and secure them correctly and then close the case. Start the pc and it's done.

  I know that my inspiron 530 can have only 4 GB of ram. I have 2 GB of ram for now.

  Is there something I need to know? Is there something different?

  Dell is not offering Win7 drivers for this model. I suggest you go here and read some of the links on the upgrade to Windows 7. Run the Win 7 Upgrade Advisor first to see what it says on your system.

  Without knowing what equipment you have (for example, video card, sound card, network adapter, etc.), it is impossible for anyone to tell you exactly what drivers you need. In some cases, but not all cases, Vista 64-bit drivers can work. The Vista 64 drivers are here. (Confirms that he says again Vista 64-bit upstairs when you load the page!) And if you use your Service tag (do not post here!) you can find a list of drivers installed Dell, so at least you will know what hardware you have, but keep in mind these drivers for Vista 32 bit.

  You can also go here for links to the hardware and instructions to install Win 7. And you can search these forums for discussions on installing Win 7 on the Inspiron 530 to see which other users may have met problems.

  Ron

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• TouchSmart 520: Camera not recognized

  I had my Touchsmart for 2 or 3 years now and have always used with Google Photos (Picasa) for edit and download. I first used a Canon EOS 400 d and a couple of years, upgraded to a 7 d. All were working well.

  Last week, I returned from vacation with about 1,000 pictures on my camera and my Touchsmart plugged the cable of the camera as usual, but it does not recognize the camera. She did little to sound a device makes when something plug into a USB port, but would not see the camera. I looked in the Device Manager to see if all the indicators showed ofr questions USB, none was.

  I restarted the Touchsmart, always the same. I removed the two external HARD disks always the same so that the camera was the only thing that connected, I tried the camera cable in all 6 USB ports, the same. I tried another cable, the same thing. I then tried a card reader with the CF in this document card, initially the same. Then I had some weird problems with the PC it recognized as an external drive but showing some strange characters in the view, but as soon as I tried to access the missing drive.

  I looked to see if there was a specific driver for the 7 d, but there is not, then I downloaded the Canon EOS s/w utility and tried to see if that recognizes the camera but it didn't.

  I jumped, then the CF card in the camera to find that the camera now showed the map in a vacuum; You can imagine how I felt thinking I had lost 7 days of vacation photos! I tried on the Touchsmart once again and it was the same thing, so I took a few pictures and they have now read on the camera but it was all that was there. I accepted that I had lost all.

  Last resort, I plugged the camera on Asus laptop, W8 for my wife and it recognized the camera and I downloaded on his laptop, then used a HARD drive them to get to the mines.

  I then formatted the card in my camera and tried CF in the Touchsmart, still does not recognize it. So, I ordered a new card see That happened today, I took some pictures in the garden, plugged the camera on the Touchsmart and you guessed it, he still does not recognize. I tried to plug in the card reader and it shows up as an external drive, but as soon as I plug the inside CF card, it is the view.

  Therefore, I hope that someone out there can help as I don't want to have to go through the process of loading on my wife's cell phone photos, copy them to a HARD drive, and then loading them on my Touchsmart whenever I have to deal with pictures.

  Hi again botty1963,

  Thanks for the quick response!

  Because your computer is not able to recognize the camera from a previous restore point, please call our technical support at 800-474-6836 for your desktop computer repair options. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Changed a WPA encryption. Office connect not wireless, ethernet cable.

  Recently changed encryption wi - fi WEP to WPA, existing home wireless network. Change of wireless connectivity for laptop computer and printer is fine, but the Office will not connect wireless, ethernet cable.

  To your XP computer's wireless adapter supports WPA?  Many as these old maps that were made before that WPA has fully adopted as a protocol.  There are also various types of WPA, not all compatible with each other.

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• error at startup after virus cleaning: "!" Office could not load or run 'explorer.exe' specified in the registry. "

  Original title: Tidying to the top of my desk after riding it a virus

  After cleaning after infection by the virus qqlog whenever I log in, I get an error message; " ! Office could not load or run 'explorer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  Explorers of two Windows Open C:\. And when I close the first error an another explorers of five Windows Open C:\.  Basically, I still have to do, but don't know how. Apart from the slowness of opening no other problems. Can someone give me help please.   Thanks Andrew

  Make sure you have backups of all important data for you (Favorites/internet Favorites, music, photos, documents, spreadsheets, presentations, drawings, numbers of series and product keys and installation to start with media) as soon as POSSIBLE.

  Format and start from scratch OR use the 'Restore Factory default' the manufacturer can give you.  Your stuff of restoring a backup after installation of your spplications on the machine.

  Why?  If this system is still messed up after cleaning a virus/trojan/worm/spyware/adware/malware - it may have to discover/waiting more moving and / ore actually operate 100% may take longer to restore to the Virgin (not to mention you can never achieve 100% otherwise.)

• MS Office 2010 not restored after reset of the laptop

  Hello

  I have a HP Pavilion DV6 laptop 3065EA, I bought way back in dec ' 2010. I had to reset recently because it was very slow. It came preloaded with Windows 7 Home Premium, as well as MS Office 2010 (remember not a trial version). However, after the laptop reset if Windows has been restored, the copy of MS Office has not been restored. Given that I don't have product key of handy th with me, not able to restore the same. Please guide.

  Thank you

  Labrousse

  According to the specifications of this laptop, it comes with a trial version of mobile. If you have upgraded to the full version, please contact Microsoft for the key. See the following link for the specification that says that this device is delivered with the trial version of office:

  http://support.HP.com/us-en/document/c02257262

• My shortcuts Office does not, to the left or right click nothing.

  My shortcuts Office does not, to the left or right click nothing.

  My shortcuts Office does not, to the left or right click nothing.

  Suggestions:

  1 rebuild icon cache. Yours could be damaged.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

  2. If this is a recent problem, and if you remember one ate when shortcuts worked ok, do a system restore.
  Choose a date where shortcuts worked as your restore point.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  3. restore explorer.exe

  Press CTRL + Alt + Delete > Task Manager > processes tab > right click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > OK