My office does not send signal to monitor

Similar Questions

• My sager laptop does not detect my external monitor.

  My sager laptop does not detect my external monitor.  How can I do detect my monitor?

  Hi William,.

  1. What is the operating system installed on the computer?

  2. what happens when you connect an external monitor, receive no error message?

  I suggest you to follow the steps and check if it helps.

  Check out the links and check if that helps.

  Work and play better with multiple monitors for Windows 7

  Add a second monitor

  I hope this helps.

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• My shortcuts Office does not, to the left or right click nothing.

  My shortcuts Office does not, to the left or right click nothing.

  My shortcuts Office does not, to the left or right click nothing.

  Suggestions:

  1 rebuild icon cache. Yours could be damaged.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

  2. If this is a recent problem, and if you remember one ate when shortcuts worked ok, do a system restore.
  Choose a date where shortcuts worked as your restore point.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  3. restore explorer.exe

  Press CTRL + Alt + Delete > Task Manager > processes tab > right click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > OK

   

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• I got a notification of update for adobe CC but it does not work and now the Office does not

  I got a notification of update for adobe CC but it does not work and now the Office does not

  I actually just finished with support on a cat and it was corrected. Thank you.

• Mid creative cloud office does not work so I can´t download apps.

  Hello! Mid creative cloud office does not work so I can´t download apps. Could you help me please?

  

  Please, try the following steps:

  1. uninstall the application Adobe CC of the machine (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  2 set the "Read and write" permissions on the files of Adobe for all users in the following locations:

  a. / Library/Application Support /.

  (b) /Users/ [user name] / Library/Application Support /.

  3. restart the computer.

  4. install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

  Kind regards

  Sheena

• My office does not start

  I have a lack of treo 680 unlocked and installed in sync software on my new macbook pro leopard.  I started to use the synchronization feature and if used to the weird (compared to the desktop on windows) presentation Office when I noticed that I wass get all kinds of duplication and even triple jobs over my clocks.  I ttied to solve this problem with the missing sync help but nothing helped. I decided to try again.

  So I uninstalled missing sync andI I went back to my PC and cleaned my laptop with my desktop PC.  I couldn't uninstall desktop for mac, so I reinstalled missing sync and made a hot sync.  I then noticed that I would have the same problem I got a notice of missing sync I got more than 5% of sync to do.  I was wondering how this could be because it was supposed to be a new synchronization with any info on my desk. I stopped the hot sync function and tried to see what was going on by opening my computer desk.  I tried several times. I tried to download to new desktop mac and re - install.  That has not worked, I kept getting the message that I got the latest version on my mac and I couldn't re - install.

  Which brings me to my original topic statement.

  My office does not start while I can clean or do a sync again.  Please someone help!

  Jonesp

  Hi again to AlanG.

  Evreything seemed to have worked OK but I guess I'll know for sure when I do the second sync.  So far so good.

  I just wanted you know also that you can't substitute the missing sync conduits, they always synchronize.  That is why I will also keep a last copy synchronized on an old utility with windows computer that I have not managed to get rid of even while I always copy a maximum of 1 day old.

  Thank you again for helping me so quickly and have been available to respond to me several times over the past day.

  Best regards

  Stone

  Message is about: Treo 680 (unlocked GSM)

• Get this error "The Office does not support the requested protocol display."

  Just built a new environment of view 4.5 and became "The Office does not support the requested protocol display" when trying to use the client to connect through PCOIP, but works very well with RDP... What Miss me?

  Wwill price points righ away.

  When you installed the Agent of 4.5 view you ensure that PCoIP components have been selected?

  -Mike

• Computer does not send data to the printer

  I have a HP Pavilion g7-1310us laptop running Windows 7 Home Premium X 64, hung up on a printer Panasonic KX-MB1500. For two years, everything worked perfectly. Suddenly, a few weeks ago, my computer go haywire. Instead to start normally, I got a black screen with an underscore flashing in the upper left corner and a constant beep - not a signal POST, just a regular beep for about two minutes. Then start Windows. A week before, without any effort on my part, my machine started to run normally again, although starting up. However, when he went haywire, she also continued to send data to my printer and still won't. The printer itself is fine. It will scan and it makes copies, it will display its own internal test page. The USB cable is brand new, and it works very well in the opposite direction; everything I scan is in my computer normally. I installed, deleted and reinstalled the printer from my Panasonic CD drivers several times, but it will still not print computer. The printer is inactive on "Energy saving" and don't go to 'Print PC' (when the fuser unit starts to heat upwards), so that the printer is still asleep. Lenovo Thinkpad I borrowed a friend (also Windows 7) and installed my Panasonic drivers on this subject, then connected to my printer. He printed the test page for the devices & Printers immediately, without any problem. Obviously there is something wrong with the software from my computer. In Device Manager, the Lenovo showed two times more than my HP shows USB controllers. (Yes, I tried to uninstall all the USB controllers and leave the machine to reinstall on reboot.) Critical something is missing in my software that prevents all three of my USB to send ports, although they receive (the function of scan and a Logitech wireless mouse) very well. Is it possible that my Windows 7 is corrupted? I ran SFC, and it signals that all is well when it executes the audit program. Obviously, something inside of my box is NOT very well, if the works of Lenovo and my HP does not work. Is it possible to trace and fix this problem?

  Apparently you have isolated the fault with the new information. You may not realize that a new detail was very informative.  She completed a string of the integrity of the material.  A printer driver and PDF995 share a common fault - Printer Manager subsystem, which also includes a spooler.

  Rather strange that a function of the software OS remains faulty.  However, this type of failure must be reported and confirmed in the system event logs.   If this software does not work, then it also does not start in the Services (or by running the \Windows\system32\services.msc program).

  BTW, are you sure that you were to load a 64-bit driver in your CV?  The other was a 32 bit OS?  Doubtful, it is a problem - but stranger things have happened.

  Pdf995 in the meantime and the driver Panasonic the two default share a common factor - the print subsystem that includes also a spooler.

  If the print subsystem is declared problematic in the case of newspapers and in Services, then restore the system on the eve of the blackout is a safe and recommended solution.  But only if this subsystem is clearly problematic.

• New version 38.2.0 does not send the password to the gmx server to retrieve messages.

  Since Thunderbird updated to 38.2.0 it will not send the password. It connects to the e-mail server but does nothing after that. I can not get any message. I am able to send mail without problem. I use as a GMX.FR mail server.

  https://support.Mozilla.org/en-us/KB/cannot-receive-messages

• Work around for the Ical does not send do not issue invitations

  If I understand the problem, ical will not send an invitation email to someone it detects has an ical account. People don't know they have an invitation or they use Google or Outlook to their calendars. Despite everything, they just don't receive invitations to your meetings. For some reason, Apple does not change the rules.

  I was going to start using my Google Calendar and just invite myself, but I used my Gmail account as my ID for Apple. Ah, the tangled web we weave when we try to be cute with Apple products.

  In any case, I was wondering if anyone had a work around for this problem "iCal don't send invitations." I want just the people I work with in voluntary organizations to get an email with an invitation attached. Has anyone found a way around this? I'm about to go to Evite!

  Thank you

  You can invite people to events using their e-mail address or their name. To invite people by name, they must be in your Contacts application with an email address, or they must use the same service calendar CalDAV or Exchange as you (for example, your company's employees).

  Invite people using window addresses

  1. Choose window > presentation.
  2. Search people, then drag them to the event.

  Send an email or a message for guests

  1. Control-click on the event.
  2. Choose send all guests or Message all guests.

  Add guests to the Contacts

  1. Force or double-click on a click event.
  2. Hold the pointer over a guest, and then click the pop-up menu .
  3. Choose Add to Contacts.If you do not see Add to Contacts, but you do not show Contact card, the guest is already in Contacts.
  4. An apple article is here: Calendar (El Capitan): invite people to events

• Does not start with 4K monitor

  Mid 2012 Mac Pro Tower.

  Spare parts R9 280 X graphics card flashed with the firmware correct EFI (fully used and recognized by the Mac).

  Today I received my new 4K monitor. When I boot the Mac the gray screen appears just after the chime. However no apple logo appears and the parts of the second half of the chimes constantly in a loop until what I pulls the strings of power out or hold down the power button. If I boot Mac without the connected monitor and finally connect as soon as I know it is completely revived, I get a screen and the full 4K resolution is put at my disposal. The computer wakes and sleeps very well.

  What is the problem with my computer?

  PS Connected via Display Port. DVI and HDMI does not support 4K@60hz on this map.

  What specific form?

  It starts OK when connected to another monitor via DP?

  Have you tried:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

• Dynadock U3 - Ethernet does not - send/receive flashing every 3 seconds

  My wife uses a Dynadock with a spectrum of XP.
  Ethernet worked fine when I first put in place, but I just noticed the wired connection does not work (only works with wireless).

  Send & receive lights on n/w Dynadock port flash every ~ 3 seconds, the Windows port & alternate state between Enabled & cable disconnected.

  Not sure how long the wired connection has not worked, but my scale did spend a couple of months to Win 8.1. At the time I had upgrade the drivers to get the video via the Dynabook work. I checked & Win network drivers have been also upgraded in this framework.

  Have seen a few other posts on uninstalling/reinstalling the drivers (done) & case where the icon network in the device driver has a warning '?' (says "device is working properly" in my case).

  Recommendations, or suggestions for a further diagnosis?

  Hello
  In my view, the question appears due to the update system 8.1 Win.
  You will need configure the network in the network adapter properties:
  To connect to the network via an Ethernet network cable, connect one end of a network
  cable to the Ethernet (RJ-45) the dynadock port and the other end to your network for the great
  performance of network access.

  To set the properties of the network to the Ethernet adapter:
  8.1 Windows, move the mouse pointer and click the icon at the bottom left of the screen to go to the
  Apps for display and then click on Control Panel-> network and Internet-> tasks-> change map settings and display the status of network.

  In the network connections folder, double-click the icon of the s dynadock Ethernet adapter connection.
  which is indicated by dynadock Ethernet. This will open the local area network connection properties window for you
  Configure network settings as required depending on your network environment.

  Note: The icon to connect to the Local network in the system tray/Notification area does not show a connection. Open network connections to display the Ethernet connection.

  I also found another thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70771