Adding timestamp to date?

Similar Questions

• Processor 'Add the current Date' added to old date

  Hello

  The processor to add the current Date added sometimes old date in time real scenario. Once the web service is bounced, it works fine.

  Can shed you some light on why this is happening?

  Kind regards

  Ravi

  I just confirmed the suspicion that precedes in a web service test.

  So the answer is to change the option on the processor to add the current Date and timestamp will be correct for each request.

• with problems of casting timestamp to date

  Hello
  
  So here's what I have... I have a timestamp in my database and I need to return it as a date (because what used to work in WL8.1 now gives me a java.lang.IllegalArgumentException: could not convert this to java.sql.Date in WL10). If I change my query as follows:
  
  I'm not running my old query to get a sample:
  Select col_key, col_time, col_other
  FROM table1 where col_key = "a".
  
  ... and I get to col_time * January 11, 2013 1:18:04.354261 PM'*... well.
  
  So, I take this value and I proceed as follows to test my format:
  
  Select CAST (to_timestamp (January 11, 2013 1:18:04.354261 PM', ' DD/MM/YYYY HH:MI:SS.ff PM') AS DATE) double;
  works perfectly, returns the date: 11/01/2013 13:18:04
  
  
  In view of the foregoing I apply to my old query:
  Select col_key, CAST (to_timestamp (col_time, ' MM/DD/YYYY hh:mi:ss.ff PM' ") AS DATE), col_other
  FROM table1 where col_key = "a".
  
  and I get a "ORA-01858: a non-digit character was found here where was waiting for a digital".
  
  ... where am I wrong?
  
  Thank you

  Martel wrote:
  Yes, it's a timestamp column...

  So okay, this is how I read online that I could convert a timestamp into date of...

  Well, what you are trying to convert a string to a timestamp and then convert the timestamp to date. That works, if you pass a string.

  If this is not the case... then how to return a timestamp as a date column?

  I already showed you in my sample code!

  I tried to_date but there is no formatting for milliseconds so why everyone suggests to_timestamp... and if this does not work then what can I do? WL10 convert timestamps java.sql.Date, so I need the request to give him a Date instead of a timestamp.

• Adding timestamp with all the elements of a table 1 d

  Hello

  I want to add a stamp in real time with all the elements of a 1 d array before writing on a worksheet.

  kindly guide me how to do this.

  Best regards

  RASHID

  Hi rachid,.

  Whence this table? Is a device for the acquisition of data AND measurement data?

  If yes you can just change the type of waveform data, where a timestamp is included.

  However, you can also create a waveform on your table 1 d using construction wavefrom, as here:

  

  Christian

• Adding timestamp to the worksheet

  I'm setting up a spreadsheet of the readings of temperature using DAQ Assistant. When I try to add a timestamp the value placed in the worksheet is always 77. What I am doing wrong?

  Thank you!

  Ben

  In fact, you do not use the DAQ Assistant.

  You use what is called the wizard of DAQNavi I've never heard before.

  But the problem is in your code where you get the timestamp value while converting to string.  You then convert the string into a byte array.  So if your time is 13:01, you now have a '1' string ': ' '0' '1' 'space' 'P' "M" and they appear as the ASCII equivalents.  The values in the ASCII array gets converted to an array of doubles and a type of dynamic data.

  The 77 value is the value ASCII for "M".  My guess it is afternoon and you basically send the value of 77 for the M character to your data file.

  Try to get rid of the express VI and type of dynamic data and convert LabVIEW Real data types in your code as soon as you can.  You should probably convert all your numbers to strings from the beginning because that's ultimately what you want to see in your text file.  By converting strings, you can control the format of each of your pieces of data, then to combine these elements of the string in a table that you send writing to a spreadsheet file.

• Is there a possibility that MusicBrainz can be added as a data provider for Windows Media Player

  When you use Windows Media Player, I was hurt a lot to identify my music. A lot of music I have is not available in the Microsoft music meta service database. What gives? Would be nice if Microsoft could be added to their database. MusicBrainz is a big data provider for Windows Media Player and would make it easier for information about the available media. Data MusicBrainz are permitted in the public domain and some under Creative Commons (CC) license. I don't think that Rovi has a contract saying to Microsoft data to use. I can cite other data in addition to the AMG providers: Journal of CD Japan, CD newspaper China, ZACR DBS and feedback from users. I can almost guarantee you if Microsoft used the MusicBrainz data, Windows Media Player would be much easier for the Organization of the music. Data MusicBrainz are much better quality than WMP user feedback data.

  Hi chuckwoodakawoodchuck,

   
  Welcome to the Microsoft community. Thanks for your suggestion, I will ask you post this feedback in the following link as well.
   
  Give us your comments for Windows 7.
  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1
   
  Please let us know if you find any problem with Windows, we will be happy to help you.

• Adding files of data on primary - errors pending

  Hi friends,

  We run 11.2.0.4.0 to DB primary and physical intelligence.

  Accidentally, one of our directors had created a new data file on the primary with StandbyFileManagement set to AUTO.

  Now repeat the process applied is stopped, and we found some erros like that on the alerts log

  ORA-27040: file create error, cannot create the file

  04002 - OSD: OSD 04002: could not open the file

  O / S error: (OS 21) the device is not ready

  #161 file added to the file of control as 'UNNAMED00161 '.

  Created originally as:

  ' D:\ORACLE\ORADATA\ORCL2010I\USERS20. DBF'

  Recovery failed to create the file as:

  ' D:\ORACLE\ORADATA\ORCL2000\USERS20. DBF'

  krsh.c 16:02:14.292 4320 2015-02-24

  MRP0: Background Media Recovery terminated with error 1274

  ORA-01274: cannot add datafile ' D:\ORACLE\ORADATA\ORCL2015\USERS20. DBF'

  krsh.c 16:02:14.292 4320 2015-02-24

  Managed Standby recovery not using real time applies

  Now, audit dba_data_files I really 01 more files on the primary. And I see errors on broker

  Error: ORA-16766: redo apply is stopped

  
  

  Advice how to fix this without compromising the total recovery?

  TKS a lot!

  Hello

  The problem is caused because it looks 'standby_file_management' database parameter is set to MANUAL, so a new added file on primary are not created in the standby mode.

  For more information about this parameter can be found:

  https://docs.Oracle.com/CD/E18283_01/server.112/e17110/initparams247.htm

  If you set it to AUTO on the main database, you will not encounter issues.

  ALTER system set standby_file_management = auto;

  How to solve current problems;

  * Pending, create a data file

  alter database create datafile  '/UNNAMED00161'.as''D:\ORACLE\ORADATA\ORCL2010I\USERS20.DBF'';

  * Start apply

  HTH,

  Pradeep

• Remove the device accidentally added to the data store?

  Hello

  I just accidentally added a device/disk to my single datastore.

  How can I remove this disc again?

  
  

  VMware ESXi 5.1
  

  have you added new drive to the existing data as a store?

  It is not possible to remove a scope of an existing data store.

  See below KB for possible ways to remove the disc added as a measure.

  VMware KB: Cannot delete a LUN measure

  VMware KB: Create and manage extensions on ESX/ESXi

  -

  Hentzien

• Conversion of TIMESTAMP to Date?

  Hi all
  
  I have this little materialized view where I use a session variable to fill.
  
  Say that I've seen like this.
  
  Select date, account, product, sum (balance) in the glbalance if date = "VALUEOF (NQ_SESSION.user_entered_date)" Grouper group by date, account, product
  
  
  Ideally, the SQL should look like: select date, account, product, sum (balance) in the glbalance if date = ' 28 / 02/2013 ' group by date, account, product
  
  
  
  I have a command prompt in the dashboard that fills the variable user_entered_date of query. but I defualted to a SystemDate in the repository.
  
  
  I have a report and this leads to a page of a dashboard. Whenever I open the page, it gives me an error. But when I select a date in the command prompt and run the report, and it works well.
  Its only when I open the page or the dashboard at the start, it is in error as syntax incorecct. I give the example below...
  
  
  The statement that is issued for the view in the present case is
  
  SET the VARIABLE user_entered_date =' TIMESTAMP "2013-02-28 00:00:00"'
  
  If date = "TIMESTAMP" 2013-02-28 00:00:00 "
  I'm not able to remove this word TIMESTAMP that is causing the error. How to do this?
  I have all the date columns in all the tables as DATETIME format only.
  
  
  When to start to choose the date at the COMMAND prompt, then SQL is published as: If date = ' 2013-02-28 00:00:00 ' is correct and properly executed.
  
  
  
  How remove the TIMESTAMP Word when I opened at the start of the dashboard... Any help?

  Current_date as good as sysdate as in Oracle.

  Use this
  SELECT dates.master_date 'DOMAIN' where dates.master_date = current_date

  For error; Difficulty is

  SELECT dates.master_date 'DOMAIN' where dates.master_date = cast (' 28 / 02/2013 ' as date)

  Check if help

  Published by: Srini VIEREN on February 28, 2013 10:49

• Adding timestamp to the dumpfile. Why do we need this space?

  11.2.0.3/RHEL 5.4
  
  
  When you run expdp on Linux, I tried to add the timestamp for the dumpfile and the following syntax worked.

  DUMPFILE= PCFS_SIT-`date '+%d-%b-%Y'`_%u.dmp

  There should be a space after the keyword date. Without the space, you will get the following error

  $ -ksh: date+%d-%b-%Y: not found [No such file or directory]

  Why is this?

  Hello
  When you type

  Date + %d - %b - %Y

  ksh (or depending on the shell you are using) looking for a file called date and then accepts various parameters to format this date

  When you type

  Date + %d - %b - %Y

  ksh search a file called date + %d - %b - %Y

  that does not exist - and throws the error.

  Kind regards
  Harry

• Adding files of data in environment dataguard

  Hi gurus,
  
  I have a doubt regarding the data file adding a table space which lies in environmental protection data.
  
  My oracle database is install in oracle 10 g 2 on windows 64-bit server. I have a physical primary data and data base of DR.
  I'll add the data file in the primary database. All my data files located in the directory "C:/oradata/data file / $Month_Name.
  
  Now, to add the new data file, I create a new directory under file C:/oradata/data / named November and add the data file in the directory from November .
  
  1 Will add new folder named November will automatically reflected in the database of DR also. or I have to go to the doctor and add the same directory and then add the data file in the primary database.
  
  2. when I add the primary database data file, it will affect the DR database? Or the DR database will synchronize automatically?
  
  Please provide me with the step by step procedure.
  
  can someone provide me steps to follow, so that primary and DR will be synchronized?
  
  Thank you
  Meena
  
  Published by: 949632 on November 16, 2012 22:46
  
  Published by: 949632 on November 16, 2012 22:47

  Hello

  The directory not created on the database ensures if create you it on the primary database.
  Let me give you an example. Suppose the data files on the standby database are currently at the location 'D:\oracle\std\data_5' and now you need to create another directory called 'data_11' as 'D:\oracle\std\data_11', then on the database pending, set the parameter "db_file_name_convert' as shown below:

  db_file_name_convert='D:\oracle\P01\sapdata5\','D:\oracle\std\data_5\','D:\oracle\P01\BTABD_11','D:\oracle\std\data_11'
  

  Db_file_name_convert syntax:

  db_file_name_convert='','','',''
  

  Note: parameter db_file_name_convert must be set to the standby database and is a static parameter. So, you have to bounce the database pending after setting it.

  It could be useful! Please examine fence by providing appropriate points if you feel that your question has been answered.

• How can I validate attribute (type timestamp) enter date day is not Sunday.

  Hi all
  
  problem is I want to validate the attribute of type timestamp. When the user select a date if the current date is Sunday as the error message
  
  show to the user.
  
  I can do this with the expression of the Groove.

  You can add a validation script to the EO attribute and use groovy as expression

  def d = newValue;
  println d.day;
  return d.day != 0;
        
  

  I have only tested with a date, but it should work with a timestamp too...

  Timo

• Convert unix timestamp to date after the change to daylight saving time

  Hello
  
  in one of the products, we use internal Scheduler stores dates (and times) in a format Unix, which is seconds since January 1, 1970. We used this SQL to extract the effective date:
  
  To_char (t.next_fire_time /(24*60*60*1000) + to_date('19700101020000','yyyymmddhh24miss'), 'yyyymmddhh24miss')
  
  Everything worked well until that time has changed this weekend from UTC + 2 to UTC + 1 (we are located in Eastern Europe). Since then, the above query returns an hour later than planned.
  
  I.e. of timestamp * 1320067800000 * is returned as * 20111031153000 * even thought is correct (and the actual time, the event was planned) * October 31, 11 PM 02.30.16.000000 *.
  
  I found queries like this on various forums and nobody seems to care of DST. Is this a configuration problem in the DB or is this a bug in our code?
  
  I tried selecting the SESSIONTIMEZONE and the DBTIMEZONE and both were + 1.
  
  Any help appreciated.

  Your problem is coded hard 2 hours shift:

  TO_DATE (19700101'020000', 'yyyymmddhh24miss')

  You need to calculate the current offset to adapt it to the current situation of DST:

  with sample_table as (
                        select date '1970-01-01' + 1320067800000 / 1000 / 3600 / 24 dt_utc from dual
                       )
  select  dt_utc,
          dt_utc +
          extract(
                       timezone_hour
                  from
                       from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
                 ) / 24 dt_prague,
          extract(
                       timezone_hour
                  from
                       from_tz(cast(dt_utc as timestamp),'utc') at time zone 'Europe/Prague'
                 ) tz_offset
    from  sample_table
  /
  
  DT_UTC              DT_PRAGUE            TZ_OFFSET
  ------------------- ------------------- ----------
  2011-10-31 13:30:00 2011-10-31 14:30:00          1
  
  SQL> 
  

  SY.

• Adding a 'today' date and time string

  Is it possible to insert a 'live' date/time string and have it appear on several pages.  Have tried to do this without success, I am confident, that it must be possible.

  Hope that I live long enough to really get my mind around all benefits of Dove.

  Thank you

  Grandpa70

  Hello

  You use CP4? Then, it's really simple:

  • Insert a text caption
  • Add to this the caption text system variables

    $$cpInfoCurrentDateString$ $ and

    $$cpInfoCurrentTime$ $

  • in the properties of the text caption, Options, choose "display for the rest of the project.

  The date and time added will be those of the system on the PC (so they must be good values

  Lilybiri

• UNIX timestamp to date

  Hello
  
  I use developer SQL to query an oracle 8 database and
  I need to convert a timestamp unix in a time format date - YYYYMMDD HH24:MI:SS
  
  I am currently using
  , to_date (19700101' 00:00: 01 ',' YYYYMMDD HH24:MI:SS') + sh.order_date / 86400
  
  but it returns just the date in the format DD-MMM-AA

  If you want a DATE to look a certain way, use TO_CHAR

  to_char (
     to_date('19700101 00:00:01','YYYYMMDD HH24:MI:SS')+sh.order_date/86400
  , 'YYYYMMDD HH24:MI:SS')