Addition of dc7800 SFF video card: no video output

Similar Questions

• SSD for HP dc7800 sff with card mother 0AA8h of Hewlett-Packard

  Can amyone tell me which, if necessary, the ssd would be compatible for a pc with this motherboard?

  Thank you

  Hello:

  All I can tell you is that you will have no support pad for one SSD on a dc7800.

  There are only two parameters of the disk controller... RAID and IDE.

  And you can have problems like I did during the installation of any hard drive that is SATA III.

  My dc7800 displayed all the symptoms listed in this document on the link below.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3718645&ac.admitted=1379354458533.876444892.199480143

  What I had to do was to take the hard drive HP Seagate 1 TB SATA III out of my HP 8200 Elite CMT and put it in my dc7800.

  Then it worked very well, and I had to buy another hard drive to my 8200 Elite.

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Can I connect a CCTV to the s-video output?

  I have a sp20 with s-video and need some images of my microscope at Uni, but when I plug in any device is detected, do I need an external card or can I set up a card for the slots? Or the graphics card from the computer should read the s-video cable (the cctv said Iris, on which I connect to my s-video output?
  My career would appreciate any help

  Hi Mark,

  Sorry if I misunderstood your request, but I think that the S-video port on your laptop is out only that you will be unable to get a signal to your laptop using the S-video connection.

• Satellite A300 - possible port VGA - not problem of video output

  I use my VGA port in two main locations, at home to connect on an old television set via a PC/TV converter and work to connect directly to a projector.

  This week he suddenly stopped working on both at the same time. I tired to another laptop in the projector to work and it works great. I also tried different tracks. The problem is certainly my laptop (which is now almost 4 years).

  The most likely thing seems to be what is ' t the plug itself. If I plug something inside Windows (7 Ultimate) is work that is an additional monitor, but the projector/TV no signal. I've tried all the obvious things, hit F5 makes no difference, and the Windows settings have not changed. The resolution and refresh rates are properly defined. I try to avoid the standard answers on the verification of all the things that I already checked!

  Now I have a HDMI port on the side, the probability is that just buying a VGA/HDMI adapter and using this port will solve the problem? I guess if it's just a physical problem with the VGA port so it will, but the problem would be a graph problem or your motherboard, and if it is will this affect the HDMI port, but also the VGA port?

  Port VGA is an analog video output. HDMI is a digital output.
  Two are different and not related them to each other.

  So I don't very well if a HDMI adapter-> / m VGA would work properly.
  Maybe it works but only with a lower resolution. So in my opinion, FullHD is not possible. However, I think that you will need to test it with your laptop.

  Usually, you can use an adapter like HDMI to DVI or DVI to HDMI smoothly.

  With regard to the question of VGA output.

  Well, usually the Fn + F5 should pass between the internal and external production. It should work with VGA and HDMI port. Maybe it's just a software related issue.
  In your case, I will try to uninstall and update the display driver. Maybe it helps.

• Satellite L750D - no video output HDMI on TV external

  I have a L750D Satellite and a SyncMaster Smart TV

  I want to connect my laptop to the TV with an HDMI cable.

  When connected, my laptop detects the TV and it can create an extended desktop, but the TV says no signal.

  I tested the TV with another laptop and it works fine.

  I deleted the display driver and was able to get some videos on television but the color was bad and the option of extending has been disabled. In addition to this, I was unable to change my screen resolution.

  I installed the latest drivers provided by Toshiba which is dated 05/09/2011. Same problem, no signal.

  Any suggestions on a fix?
  There latest video drivers that I can download?
  AMD offers I go here for the drivers.

  Any help is appreciated.

  Hello

  I assume that you have installed Win 7. Right?

  > I installed the latest drivers provided by Toshiba which is dated 05/09/2011
  There is a new display driver released on 13/04/12 [AMD display driver v8.911.6 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 6463 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 81347 & OSI D = 30 & driverLanguage = 42]

  Install this one.

  In addition, you need to install other tools such as Toshiba Value added Package, AMD display tool, ATI Driver Sound as well as driver Conexant audio and other.
  Then you should be able to use the FN + F5 to switch to the external video output

• HP Pavilion Elite HPE-400Y no video output.

  Hello

  I have a HP Pavilion Elite HPE-400Y computer that I had stored (unplugged) in a bedroom closet bedroom for almost a year.  It was working fine when I put it in storage.

  This past weekend, I wanted to use, so I plugged in and connected to an analog VGA monitor well known on the integrated motherboard video VGA analogue connector.  When I turned on, there is no video on the monitor.  I searched the HP support site and found a statement that said "built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time. "This computer came with a 5450 PCI express X 16 video card installed.

  However, the 5450 PCI express X 16 video card only has a digital DVI and I wanted to use a loose analog VGA monitor.  So I powered it turned off and physically removed the 5450 PCI express X 16 video card.  Then I unplugged the power cord and removed the CMOS battery for a few minutes.  Then I replaced the battery and applied again to power.

  I still do not get all analog VGA video out of the motherboard, not even the BIOS messages it is first energized.

  I also tried to integrated edge connector with a DVI equipped, monitor.  Still, there is no video output.

  So I removed the power and re-installed the 5450 PCI express X 16 video card that has only a DVI connector.  I connected to a monitor DVI equipped and applied again to power.  There is still no video output was two well-known instructors.

  When I turn on the computer, the fan power works, processor and fans of casing run, the blue led on the switch is lit and not blinking.  The Green LED on the motherboard is on.  The Green orange and activity led Ethernet link light are on.  There are no beeps.  I can hear the hard drive starts to work.  I have no video output.

  I use a HP USB keyboard and a USB mouse.  The red LED at the bottom of the mouse is not on.  The shift lock and lock lights number do not light when you press the corresponding key.

  This computer has spent more time of storage that it has been used.  It worked even when stored in a bedroom closet in bedroom.  I checked all the wire connections on the motherboard, with no improvement.

  I would like any suggestions to get this working of the computer.  I wonder if the motherboard has somehow that went wrong.

  Thank you for your help.

  Hello Big Dave,

  Thank you for answering my question / problem.

  I am aware that I can not use an analog VGA connection on the motherboard for a digital DVI input on my LCD monitor and vice versa.  I tried two different montors both analog and digital connections on the motherboard.  I tried to communicate clearly, but I guess that I don't have.

  It is unimportant, now that I've found that HP recognizes that my computer model had a drawing or a manufacturing defect that causes the exact symptoms I am having.  There is here a link to HPs extended warranty program that describes the patterns and symptoms:

  http://support.HP.com/us-en/document/c03199423

• HP Envy 700 - 056. needs of s-video output

  problem: output s-video necessary on this HP Envy machine 700-056

  any suggestions? for example a PCI card with s-video output?

  Hello

  Looking to capture input-output video or simply?

  S-Video graphics cards are pretty much out of manufacturing.  Search for a 9500 GT from NVIDIA if you want to output.  MS Windows 8 shows compatibility with the 9500 GT from NVIDIA.  There are several models of 9500 GT listed as compatible.

• HP Pavilion 23 All in one PC: how to video output of the 23 Pavilion

  Hi HP.

  I use HP Pavilion23 AIO PC like my PC photography. I often have a video projector or tv but it wasn't a video output for Pavilion 23.

  I'm looking for video output solution fom my PC AIO.

  Are there any external video card, can I apply?

  Is there any device USB - HDMI that I can use?

  Please advice as it is an obstacle for my work.

  BenSiak Malaysia

  Hello

  They are many, such as:

  http://www.StarTech.com/AV/USB-video-adapters/USB-3-to-HDMI-DVI-external-video-card-multi-monitor-adapter-1920x1080~USB32HDE

  Kind regards.

• Video output Vista professional S has stopped working

  I use a s video cable to the back of my PC to my home theater receiver. The video output was previously, but stopped. I always receive sound but it is via a separate coaxial digital cable. I tried other sources in the entrance of the receiver box and winning photo through them isn't a problem with the receiver box. Any suggestions on what may have caused this?

  Hi gc1971,

  Thank you for writing to Microsoft answers Community Forums.

  1. first of all, check that the s-video cable is correctly.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. make sure the TV is set to the s-video input.

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  You can also click on the link for more information about connecting TV to your computer

  Connect your computer to a TV

  http://windowshelp.Microsoft.com/Windows/en-us/help/2a2cde13-B60C-4F2F-b9da-4a433cc51ca91033.mspx

  Note: Make sure that your display card drivers are updated to the latest version available.

  Given that this issue has started recently, you can also try to do a system restore to a point at the TV-out worked very well.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose a different restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Click on the link below for more information on restoring the system

  System Restore: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit our Microsoft answers feedback Forum and let us know what you think.

• pouvez ATI RADEON X 1550 compatible to hp compaq dc7800 sff

  IM planning to buy a vc that atleast can run 3d games slowly.

  Can ATI RADEON X 1550 compatible to hp compaq dc7800 sff?

  Here is the specifications is:

  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Compaq dc7800 Small Form Factor
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 CPU 6320 1.86 GHz (2 CPUs), ~1.9GHz
  Memory: 3072 MB RAM
  Available OS memory: 3042MB RAM
  Page file: 1651MB used, 4430 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  and if its compatible. How can I disable the integrated vc? and if not, can you suggest a good vc compatible in my system unit?

  ---------------
  Card name: Intel(r) Q35 Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Intel GMA 3100
  DAC type: internal

  Hello:

  The info that I could find, X 1550 can develop 27W power, which is very good for your PC.

  So, if you have one, all about the pose that will fit in your case, then it should work without problem.

  Why not opt for a more modern card and get a Radeon HD 6450?

  This is the map used in the 8200 Elite SFF that has the same power 240W.

  He would use the subject of the same power - or even less.

  Just make sure that you get a low profile with the extra-thin bracket card.

• No HDMI output video output mode "DUPLICATE".

  I'm having a problem trying to get this laptop at the video output to the HDMI port mode DOUBLE.  In DOUBLE mode the frame buffer should be displayed on the screen of the computer AND it should display the video on the HDMI port, so it can be seen on a HD TV, and al.  What is strange, is that EXTEND and PROJECTOR ONLY modes work that proves the cable, HDTV, and the video port on the laptop works properly in these modes.  However, duplicate video mode is displayed on the screen of the laptop and no video out the HDMI port.  I know because the HDTV screen is empty with the exception that the HDTV displays the message "No Signal".  I have the latest firmware and installed video drivers.  Anyone who has an idea of what's going on?

  This computer is only 3 weeks.  This is the first time I tried to use the HDMI output on it.

  HP Pavilion dv7 - 6187cl

  Windows 7 64 bit

  I think that I found the solution to the question that I had.  The problem seems to be that the laptop seems to be driving the HDMI output on HDTV with a resolution of 1600 x 900.  This causes the HDTV to not be able to synchronize the signal from the laptop.  As HDTV does not recognize the resolution, the screen on it is empty.  However, even though mode DOUBLE, if you change the resolution of 1366 x 768 laptop, then the laptop and HDTV display video.  Curiously, although the HDTV can manage resolution up to 1920 x 1080 it is impossible to view the output of the laptop when it is set to 1600 x 900 mode DOUBLE.  If the PROJECTOR ONLY mode HDTV work very well in resolution 1920 x 1080.  In addition, when mode EXTENSION the laptop and the extended secondary display can be set to a resolution of 1600 x 900.