SSD for HP dc7800 sff with card mother 0AA8h of Hewlett-Packard

Similar Questions

• M58e 7269 SFF connector card mother USB2 pinouts (PIN # s & functions) ex + 5Volts = pin, etc.

  Just bought two new ThinkCentre M58e 7269-SFF.

  We need to use the internal motherboard USB2 connection to provide the connectivity (for printer POS cash drawers). It is an investigation of the pinout USB2 motherboard (functions & key numbers. USB2 connector for card mother M58e is 12 pins, with a key (unused pins). Cannot determine what PIN pin connector 1,2,3 etc and cannot find the description of USB pins on each spindle is used for (Eg. Red, Green Black Yellow and their function. Example the 5Volts pins & #, ground pine & their numbers etc.). Reflected on all knowledge databases, previous community issues and called Lenova support numbers (but failed to get a response).

  The second pattern HERE will give you the info you need.

• Windows xp professional compatibility with card mother i5 to intel

  Hello
  I want to upgrade my pc to the card mother i5 intel. Windows xp professional compatible?

  Yes, but in order to be check secure web site of technical support from the manufacturer of the motherboard for Windows XP device drivers. If the drivers are available for download, then you know for sure that XP is compatible.

  If you have the original version of XP or a CD with a Service Pack (1 or 2) earlty, it allows to upgrade the CD with Service Pack 3 "slipstreaming".

  How to create a Windows XP SP3 slipstreamed CD
  http://www.PAGESTART.com/slipstreamsp3.html

  J W Stuart: http://www.pagestart.com

• Adding additional SSD for dell xps 15 with 256 GB SSD

  Hi, I just bought a dell xps 15 9550 with 6th gen i7, 8 GB of RAM, and 256 GB ssd. Is it possible to add an additional SSD for the location of hard disk 2.5 inches remaining. If possible do I need to buy the cable for SSD too or is that what cable already included here?

  Thanks in advance,

  There is a support and a set of rubber bumper needed to connect a disk 2.5 "hard.  In general, these are not delivered with the system unless it is controlled with a hard drive - you must remove the base of the cover to check if - some reports are that some versions can be delivered with the necessary equipment.  If not, they are likely available from spare parts from Dell and from other sources such as EBay and third Dell parts suppliers such as share - People.com.

• support for the improvement of a dc7800 sff with a QC 8400

  Hello

  I bought my HP DC7800 desktop from a broker who got a point on HP desktop computers get a bankruptcy in 09. Now I got a copy of Vista Business x 64 and 4 GB of ram DDR2 of Z OC-)

  Hello AnthonyK, I did a little more research and found this interesting information.

  It seems the E6750, the E8300 and E8400 CPU both have a thermal basis of 65 watts TDP.

  In other words, that they are built on the same core process, with speeds just different.

  Intel seems to have been able to reduce the thermal power of these processors with the 45nm.

  Your current E6750 has a current draw slowed 123 watts total system power consumption and a current draw stressed 163 Watts.

  The E8300 has a current slowed to 128 watts system appeal total current consumption and a current stressed 158 Watts.

  The E8400 has a current appeal slowed 131 watts total system power consumption and a current draw stressed 158 Watts.

  What are the limits of your current processor.

  I don't think that an improved power would be necessary. These processors, since they will perform at higher speeds, can create a little more heat, but if you clean the system completely when you change the CPU, you should be fine.

  Sometimes a BIOS update is required when the processor is upgraded. Here is the link where the BIOS can be found if your system requires a. You can first check the BIOS and see if there is a newer version available.

  Just some thoughts.

• Addition of dc7800 SFF video card: no video output

  I bought an EVGA GeForce 210 graphics card to an HP dc7800p SFF.  PCIe low profile fits into the designated location and the fan works, so I don't know that it is powered.

  When I install the card and the start-up of the machine, I get no video output at all.  There is no output over the connection video integrated dc7800.  It is perhaps as expected, because the technical documentation indicates that installing a PCIe x 16 graphics subsystem integrated card Devils.  However, there is no video output from the GeForce card either (from the VGA or digital outputs).

  The machine appears at Startup OK, because I can hear the prompt for the power on password.  If I enter that password, I get audio confirmation that it has been entered correctly entered and remove the disk activity whereas Win7 initializes, I can't see because there is no video output.

  I have updated the BIOS until the last level available about a week before, so I don't think it's a factor.

  I've read other suggestions, which some suggest to disable the video through the BIOS Setup.  I hesitate to try this, because if I turn off the video installation, integrated GeForce card and it doesn't work, then I have a machine with no video and no way to reactivate the integrated graphical subsystem.

  Suggestions please.

  Hello:

  The Board may be faulty.

  Even if the P/S of your model is only 240W, this card should work with a 240W P/S.

  I also agree with you that it would be imprudent to trifle with the BIOS settings. That will lead you nowhere anyway.

  The video card automatically disables the car video, and if you were to somehow anticipate that, Yes, you must reset the CMOS in order to retrieve your video. Not at all difficult to do, but why waste your time?

  Now... Did you first uninstall the video drivers before installing new video card?

  If this is not the case, there is an outside chance that is the question.  If you do not, remove video card, start the PC and uninstall the drivers for the on-board video.

  Reseat the video card.

  You can also clear the CMOS and play the long shot.

  See the guide below for how to do this.  It'll take you a few minutes. (Annex B, page 60).

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01162207/c01162207.PDF

  In this way, you have done everything you can and then came to the conclusion that the card is bad or not compatible.

  Return the card and get this one. $21.99 after discount. Comes with metal DVD/HDMI low profile.

  The Radeon HD 6450 is an option card offered in the HP Elite 8200 Mini PC, which is more recent than the dc7800 a few generations, but it has the same P/S 240W.

  http://www.Newegg.com/product/product.aspx?item=N82E16814125404

  BTW, when you install a video card to work with HDMI, your integrated audio system is also disabled.

  So after installing the video drivers for the card, restart the PC, go into the BIOS, go to the menu of the device on board and change the audio settings shipped from disabled to enabled. Press the F10 key to save the setting and again when you go out.

  Paul

• Please help with card mother tx1000 image/information

  I have a tx1000 that just had a failure on the motherboard. A chip failed which apparently provides power to the external ac converter to the rest of the motherboard. Before I go buy a new motherboard (or a new laptop) I'll try to replace the chip that is visibly damaged. I guess that its a sort of thing pretty standard voltage regulator. The only problem is the part number was burned during the failure of the chip. (Of course, this thing is out of warranty or I wouldn't try this). I didn't get help from hp support again.

  Can anyone provide me with the missing numbers from the images below? Or just send me a picture of a high resolution map tx1000 mother? It's the chip in the red zone in the image of the whole of the Council. You can see that it is clearly damaged in close-up. I need an image with as much resolution as the close-up to read the number.

  Thank you!

  

  

  I checked the chip on my mobo and it said: 4413

  BA7YIL

  It may be useful

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• Hewlett Packard HP Compaq 8710: DRIVERS FOR MY HP Compaq 8710p Hewlett-Packard

  System serial number: (deleted content)

  I just installed windows 10 home 64 bit on this laptop and cannot very well the drivers for the following items:

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

  I was everywhere on your site and found the driver for this computer page.  Installed all the drivers and have narrowed it down to these two left.  It seems that this laptop is a business laptop at the same time.  It has a mooring on the bottom port.  I also have been all over google and still can not very well the drivers for it.  Please give me a link to get the drivers.  Some of the links I've tried in the forum do not work.

  Also if someone knows something about an update of the bios for this computer would be helpful also.

  Hewlett-Packard HP Compaq 8710p F.0D

  I ended up getting on a live chat with a person who, after several trys, found the right driver.  I don't remember the name of the file.  I also got a lot of response from the HP support team.  Thank you for that.  They said they want to ensure that the driver is available on the Web site.  Pending.

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• I get a Toshiba satellite 1900-102 with a default card mother work

  Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?

  Or does anyone know where to find that?

  Hi Erdl,

  I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!

  In my opinion, you will have more luck at ebay or used equipment selling home pages!

  Sorry
  Campino

• Need drivers chipset card mother AmethystM (MSI-7184), for Vista 64 bit OS

  I'm looking for the proper chipset drivers, or compatible drivers, for the card mother MSI-7184. The chipset is ATI RS482 & ATI SB400. Specifically, I'm looking for the following drivers:

  PCI express filter driver - currently using Catalyst 8.3 ATI PCI Express (3GIO) Filter Driver

  Configuration AMD address map - currently using the standard driver microsoft

  HyperTransport (MC) Configuration of the Trace Mode - currently using the standard driver from microsoft and DRAM AMD

  AMD HyperTransport Configuration - currently using the standard driver microsoft

  Configuration of various AMD - currently using the standard driver microsoft

  ATI i/o Communications Processor LPC Controller - currently using the standard driver microsoft

  ATI i/o Communications Processor PCI Bus Controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Communications ATI i/o Processor USB 1.1 OHCI controller - currently using the standard driver microsoft

  Controller ATI i/o Communications Processor USB 2.0 EHCI - currently using the standard driver microsoft

  Controller IDE ATA standard - currently using microsoft standard driver - it's supposed to be SATA I think that my HD is connected to it and its SATA

  Standard ATA IDE Controller - currently using the standard driver microsoft

  Bridge standard CPU PCI - currently using the standard microsoft driver - what is supposed to be ISA instead of the processor?

  PCI and standard PCI to PCI Bridge - currently using the standard driver microsoft

  I'm looking for drivers because my CPU usage is constantly at 45-60% usage. My processor is an AMD Athlon 64 X 2 4200 +. Devices and drivers of Thease are what Vista has recognized and loaded. I don't think that is correct. Any help on this would be greatly appreciated.

  Sean

  OK, I found the appropriate drivers!

  ATI drivers:

  Drivers of North Bridge: catalyst 8-12_vista32-64_sb_72277

  SMBus, & IDE drivers: catalyst 8-12_vista32-64_72274 - run the program so it extracted all files in c:/ATI do get out. Then manually install two IDE controllers and SMBus drivers by using Device Manager.

  Also, I solved the problem with the hardware interupts. The on-board USB controller and suport Legacy interfere with the video card. To fix this go into the BIOS and under Advanced, disable Legacy support. Then in Device Manager disable all three usb controllers. These controllers have been disabled as soon as the missing of interruptions. I'll get a PCI usb so I can still have USB ports.

  Message edited by shfire2000 on 01/26/2009 21:51

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation