additional setup that is not OR

Similar Questions

• BlackBerry smartphones can not remove an additional icon that resembles the icon browser (Earth)!

  Recently, an additional icon that resembles the browser (Earth) icon appeared in my icon page.  It says Mobile of NASCAR Sprint Cup, I don't even like NASCAR... lol... I tried, and if sprint technicians tried everything... Cannot remove it. We have removed the maintenance for this icon book and he returned whenever there is a reboot or battery pull. I tried to install it, hoping that it works... He moved says "error HTTP 404: not found.» This page you are trying to load is not found. Please try loading a different page.  That I have and that's technicians, we tried uploading directly from the site of sprint store, hoping once downloaded, this icon disappears... Then we could delete, but nothing. I wouldn't mind just hide this darn icon, but since it's appearance, it freezes a few apps. They sent me another one BB and the same thing appeared. I am at a loss... It's the sprint technicians. I want this icon... HELP Please

  I have this problem too, on the Pearl 8130.  My device is low on resources to start.

• I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

  I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

  See link below and check:

  https://forums.Adobe.com/thread/1848277

• I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  I install the new cc2014 update, but for some reason any in my computer displays double former app and the new, but the new dose did not setup that I have in my old version! What will happen?

  Thanks, I have solved this problem, simply delete the old and manually I have brand new!

• When you connect to my igoogle I get a Setup page that does not

  When I try to connect to my homepage (www.google.com/ig) I get a page 'CREATE YOUR WON HOME PAGE IN LESS than 30 SECONDS' that is not responding. It asks me to choose my interest, select a theme, select a country and zip code, and then the button on YOUR PAGE, or alternatively 'Already have a Page - Sign In' this page does not. He will not answer closed by clicking the X in the upper right corner, or by clicking VIEW YOUR PAGE and SIGN IN. In the background, behind this page is a small generic Google homepage.

  RESOLVED: Do not know what caused this problem but I finally solved it by uninstalling the whole FIREFOX program and then download a new copy and install it.

• #2 does not install additional programs that were on mac before wiping disk cleanup

  After wiping mac and re-installation of the operating system from disk 1, disk #2 would not install the extras (iPhoto etc.) provided with the mac when buying.

  Message says that could not install software because there's no software to install.

  If you are certain that there is a functioning OSX Snow Leopard installed, try this:

  https://support.Apple.com/kb/dl1399?locale=en_US

  I don't know if it will work or not.

  Ciao.

• How to setup Windows 7 as a working group that is not part of a business network?

  I have 2 Win 7 Pro systems implemented on a working group that is not part of a domain (on XP it was no problem to set up a home network, not a business network). However, Win 7, although it gives the option under system, network ID properties, joining a domain or a workgroup, it fails to really accept the parameters of working group. After the reboot, it is always default to a Business Network setting. It's very frustrating because security seems to be much more rigorous to manage communication; sharing, etc.

  There must be a solution to this. Someone has the answer to get systems to settle and remain in a workgroup about.

  Thank you

  John

  CopierGuy wrote:

  I have 2 Win 7 Pro systems implemented on a working group that is not part of a domain (on XP it was no problem to set up a home network, not a business network). However, Win 7, although it gives the option under system, network ID properties, joining a domain or a workgroup, it fails to really accept the parameters of working group. After the reboot, it is always default to a Business Network setting. It's very frustrating because security seems to be much more rigorous to manage communication; sharing, etc.

  There must be a solution to this. Someone has the answer to get systems to settle and remain in a workgroup about.

   
  Since then you have only really two choices (workgroup or domain) and to join a domain - servers any must be involved...  I think that there is a lack of communication here.
   
  A "working group" is really - even with all the recent stuff - just a bunch of stand-alone computers with the same name.  John and Jane Smith Mikey - for example.  It can * help * simplify some shares in all areas of resources, but is not as a true area - where they share not only the same name - but many of the underlying parameters is pushed down by a central control entity (server).
   
  So - let's make sure that you are talking about the same thing that you seem to believe that you are.
   
  In the desktop menu or start - right click on "Computer" and choose "Properties".  This should open this folder: 'configuration\systeme and Security\System control. "  -"Computer name, domain and workgroup settings" should be things foure - please list those in response to this announcement.
   
  You can even JOIN a domain with a server being involved and demand - if...
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• additional hard drives will not be broadcast - MacPro

  My Mac pro:

  In early 2008

  4 GB of ram

  El Capitan

  2 x 2.8 GHz Quad - Core Intel Xeon

  ATI Radeon HD 2600 XT 256 MB

  500 GB SATA drive

  I write this new cause I seem to have lost the original - post not found... Laughing out loud

  I installed 2 HD to my PowerMac, Mac OS X (10.5.8), G4 - AGP: 450: sawtooth: 2 GB ram: 2HD, I did as stated by opening the door, remove them, then you place them in the Mac Pro HD bays. Unfortunately neither one will be recognized. Has been used for storage, so there is no BONE inside, just files, but the other was / is a disc master so that's probably the reason why he clung to restart, he got confused about which lead to start with, old or new... there mount Lion

  Additional discs for the Mac Pro will I be some kind, ATA disks that do not show.

  Mac Pro drives are SATA drives and have a connector two distinctive parts which provides power on the side of 15 pins and data on side 7-pin:

  

  (click to enlarge)

  image of wikipedia

  Have you used your Mac Pro sleds? you tighten the screws so that they were all "just tight" and slightly compress the washers? you took care to make sure that disks have been completely recessed in the bottom connectors of basket? Have you had problems to just close the door?

  Finder cannot see them?  > > Use Finder preferences to display all readers.

  .. .or even though they cannot be seen in disk utility?

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• iPhone 5 - can't turn off / reboot that can not enter password

  iPhone 5 - can't turn off / reboot that can not enter password

  Screen has the 'things to do' info partially down the top of the screen, unable to access the "forehand" (try but does not) to unlock, when press button on / off nothing happens (normally have to enter the access code, but cannot get to it!)

  Any ideas?  I'm leaving tomorrow at 04:00 to travel and NEED this phone.  Have a "Genius Bar" appointment at 05:10 this evening in a busy shopping mall but prefer NOT to have to do!

  A C & P is appropriate here...

  If it has NEVER been jailbroke, here are a few standard repair procedures:

  First of all, try a system reset.  He heals many ailments and it's fast, easy and safe...

  Hold down the power button and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You won't lose any apps, data, music, movies, settings, etc.

  If the Reset does not work, try a restore.  Note that it is nowhere near as fast as a Reset.  It could take well over an hour!  Connect via a cable to the computer that you use for synchronization.  In iTunes, select the iPod/iPhone/iPad, and then select the Summary tab.  Follow the on-screen instructions for restoration and don't forget to say 'yes' to the backup and go back to iTunes on the computer (NOT iCloud) because it is more comprehensive.  You will be notified that all data (apps, music, movies, etc.) will be deleted, but that the restoration is complete, you will be asked if you want the backup content to be copied to the iPod/iPhone/iPad.  Even once, say 'yes'.

  At the end of the basic restore, you will be asked if you want to synchronize the iPad/iPod/iPhone.  As before, say 'yes'.  Note that syncs selection will disappear and the restoration will terminate if you do not respond within a reasonable time.  If this happens, only applications that are part of the IOS will appear on your device.  Corrective is simple – bottom right of iTunes, choose manual 'Sync '.

  If you are unable to do the restore (or it does not help), go into Recovery Mode according to the instructions here.  You will lose all your data (game scores, etc.,) but, for the most part, you can redownload apps and music without being recharged.  In addition, read this.

• Satellite L300 - peripheral USB need drivers that does not exist

  Satellite L300 race Win Vista 32 bit, connection of new devices (for example the card reader USB Signalex), I ask for a device driver that does not exist on the computer or on the Web and should not be necessary.

  How to do this? My previous laptop under Vista did not ask this.

  Hi Greenman,

  Have you tried other USB devices such as a USB or disk external DRIVE with USB interface? Normally you n t need additional drivers for most USB devices except printers for example.

  More I recommend removing all the USB ports on the Device Manager and then restart the laptop.

• Unable to get copy of targeting DAQmx.dll 4.5 / / the type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced.

  I inherited a software project that uses the NationalInstruments.DAQmx.dll library. I currently have the 13.0.40 32-bit version of the library. I rewrite the 64 bit .NET 4.5 and have found problems when you use the 13.0.40 version. Namely the two errors below

  Error    1    type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...
  
  Error    2    type 'NationalInstruments.ISynchronizeCallbacks' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version = 13.0.40.190...

  Research mistakes online, I think that the problem is that my current DAQmx.dll is the .NET 4.0 framework and my new project target .NET 4.5.

  I went on the Web site of NOR and downloaded the NI DAQmx 15.1 "Downloader" (found here http://www.ni.com/download/ni-daqmx-15.1/5617/en/). This executable, once executed, then downloads ~1.7GB compressed files, once unpacked there are a large number of software and current documentation. After speaking with an engineer application OR on the phone he asked me to launch the NI DAQmx setup in the top level of the unpacked files folder. He then installed what I would call the Suite OR software... (Front flip, after I did an uninstall, the uninstall program me notified that I'm removing 224 pieces of software.) So why I call it the Suite OR).

  After installation, I was tasked to search for a similar folder installation directory to MStudio / / DAQmx / / DotNET / / assemblies / / current for the new version of the DAQmx.dll but only found dll starting with NationalInstruments.Common and anything ending with DAQmx. I also did a search on the full installation for the dll directory and found no NationalInstruments.DAQmx.dll. I decided to try the . Common.dll suggests that the naming convention may had changed, nothing helps.

  (Just some extra info) Finally, I went to the machine that has the old version of the Suite OR on it (I develop on a separate computer from the one using my instrument NOR) and looked under the same folder I mentioned above. Under this folder I locate a NationalInstrument.DAQmx.dll if this is the one I currently use. I also find a 64-bit version of the 13.0.40 dll, which is nice, but still has the same problems as the 32-bit version.

  So I guess my questions are now

  • Do I have reason to think that I need a newer dll? The one with the XX naming convention. XX.45 (15.1.45, I hope)?
  
  
  • If so, a DAQmx.dll who target 4.5 is of NEITHER?
  
  
  • If it does not exist, where can I find it? ...

  Well, I think I have mislead you again NYC. It seems that my problem has not been resolved. I tried all the libraries for each version, Measurement Studio from 2010 to 2013.

  The folder structure I have is as follows.

  \MeasurementStudioVS2010\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll
  \MeasurementStudioVS2010\\DotNET\\Assemblies\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2010\\DotNET\\Assemblies (64-bit)\\15.1.40.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)\\Current\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2012\\DotNET\\Assemblies (64-bit)-15.1.45.61\\NationalInstruments.DAQmx.dll

  \MeasurementStudioVS2013\\DotNET\\Assemblies\\15.1.45.61\\NationalInstruments.DAQmx.ComponentModel.dll

  Obvious all directories not marked 64 bits fail because they are not 64-bit. Directories marked 15.1.40.61 do not work gives me the original error. because they target DotNET 4.0. Under the VS2013 directories are not NationalInstruments.DAQmx.ComponentModel.dll only NationalInstruments.DAQmx.dll. Directories marked with 15.1.45.61 highlighted give the same error, namely

  Error 1 the type 'NationalInstruments.ISupportSynchronizationContext' is defined in an assembly that is not referenced. You must add a reference to assembly ' NationalInstruments.Common, Version =15.0.40. 49154...

  Which I guess means that the name of the 15.1.45 directory does not coincide with the 15.0.40dll version. Am I misunderstanding this error, or am I wrong that the dll under 15.1.45 are not what they are labeled as?

  For reference, here are two snippits of code I'm trying to do work.

  using (NationalInstruments.DAQmx.Task analogWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AO, PhysicalChannelAccess.External);
  
      analogWriteTask.AOChannels.CreateVoltageChannel (channels [1], "aoChannel", MIN_VOLTAGE_OUT_THEORETICAL, MAX_VOLTAGE_OUT, AOVoltageUnits.Volts);
  
      AnalogSingleChannelWriter writer = new AnalogSingleChannelWriter (analogWriteTask.Stream);
  
      writer. WriteSingleSample (commandValue, true);
  
  }

  
  

  using (NationalInstruments.DAQmx.Task digitalWriteTask = NationalInstruments.DAQmx.Task (()) new / / errors arise here using task
  
  {
  
      String [] channels = DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.DOPort, PhysicalChannelAccess.External);
  
      digitalWriteTask.DOChannels.CreateChannel (channels [1], "port1", ChannelLineGrouping.OneChannelForAllLines);
  
      DigitalSingleChannelWriter writer = new DigitalSingleChannelWriter (digitalWriteTask.Stream);
  
      writer. WriteSingleSampleMultiLine (commandValue, true);
  
  }

  EDIT: So the real problem is that I have not included NationalInstruments.DAQmx.Common.dll in my project.

• The feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi'

  Original title: trayapp

  When I open the computer message appears, the component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi' in the box below.
  C:\Users\user\AppData\Local\Temp\7zS5216\setup\TrayApp\
  When I click ok the message this way that c:\users\user\appdata\local\temp\7zs5216\setup\trayapp\ is not found. Verfy that you have access to this location and try again or try to find the 'TrayApp.msi' in installing a package file from which you can install the product'TrayApp.
  When I try to cancel the warning message, is that an installation package for the TrayApp product is not found. Again the installation again using a valid copy of the 'TrayApp of installation' package. I already uninstalled all HP products, but this message is still bothering me, how to solve this problem?

  Hey Tama,

  
  -What version of windows is installed on the computer?
  -Have there been recent changes to the computer before the show?
  I recommend you go through the next HP document and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00811375
  Hope this information is useful.

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Error d:/setup.exe is not a valid win32 application

  I try to install Age of empires III of my game DVD. his Dungeon, which gives the error of setup.exe is not valid win32 application whenever I click on the Setup file...

  and my OS is windows 7 64 bit and the game I tried to install I guess that its x 32 but not sure... its release in 2005. so can I install the game change my farm or what can be the solution...?

  Hi keshram,

  Age Of Empires III is certainly compatible with Windows 7 64 bit operating system. Click here to check.

  There is an article that can help you solve the problem with the installation. Follow all the steps in the article. Age Of Empires III is also listed.

  Error message when you install Microsoft Games and mapping programs
  http://support.Microsoft.com/kb/258496

  Aziz Nadeem - Microsoft Support