address fails to TNT4882 gpib

Similar Questions

• Email address fails the test of grid control

  I get the following message appears when I test an email address in the grid control:
  
  * [email protected] the Test failed with the message: "e-mail address is not valid: sending failed; nested exception is: javax.mail.SendFailedException: invalid addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for the [email protected]
  
  I wish that the grid control to send alerts and messages to my text pager. The address works very well on my Outlook account so I know that it is valid at least to our exchange server. Is there a way to format the address so accepts the order of grid? Or y at - it another way I can get the grid control to send messages to my pager?
  Can anyone give any help will be greatly appreciated.
  Ken

  You must allow your control grid to email relay server. This is a configuration that must be done by your SMTP server or Exchange administrator.
  By default, servers are not allowed to relay e-mail because it could cause spam.
  HTH

• Configuration of the IP address failed NIC a VM

  Hello

  I use the following line in my script to configure a static IP address for multiple VMs to csv:

  «Invoke VMScript - VM $VM.name ScriptText-' netsh interface ipv4 set address "Ethernet0" static $vmip $sub $gw' - GuestUser $GuestUser - GuestPassword $GuestPass»»

  The command works for a long time to map NETWORK is actually called "Ethernet0."   In order to operate whenever I need to rename the NIC in my models as Ethernet0.  I wonder if I can create a more secure solution that doesn't require you to change the VM Templates I deploy from fire.

  I can do the following situations?

  Option #1 before running the command netsh run another command that renames the adapter of whatever it was originally (example, area 1, area Network2, etc.)

  Option #2 before running the netsh command Add a new adapter called Ethernet0, configure the IP address on the new card using the netsh command, release the IP address on the original adapter, and then remove the original virtual machine adapter.

  Alternatives best I think not?

  You can use the Get-VMGuestNetworkInterface cmdlet to retrieve the networkinterface and Set-VMGuestNetworkInterface to change the IP address, for example:

  $vmGuestNetworkInterface = get-VMGuestNetworkInterface - VM $vm - GuestUser pass2 user - GuestPassword

  Game-VMGuestNetworkInterface - VMGuestNetworkInterface $vmGuestNetworkInterface - GuestUser pass2 user - GuestPassword - IP 10.23.112.58

• Reporting queued error: failed application wmiprvse.exe, version 5.2.3790.4455, module ntdll.dll, version 5.2.3790.4937, fault 0x0001bb52 address failed.

  Only, we met error na on our application server with Windows 2003 and he enrolled in the event application log "failure of Communication because corrupt memory. I wanted to link to the error in my topic. Please have your opinion on the matter.

  Hi Jun Tumulak,
   
  Welcome to the Microsoft community. According to the description of the problem, I realized that you have a problem with a particular program's performance. As you are using Windows 2003, I suggest you for this post in the following Technet forum.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

• IP address failed to set up XBOX Live

  I have a WRT54G2 router on my home network Windows XP and I'm trying to set up my XBOX on my network.   The XBOX recognizes my network, but does not recognize the IP - message says 'IMPOSSIBLE '.  Can anyone help?

  I tried the suggestions and some of my own by accident - thanks for the info.  I came across the solution however.  Here are the steps I took:

  1 voltage then systyem on-screen Xbox 360: I erased all settings of network by hand.

  2. I put all the network settings on automatic, nothing happened.

  3. I typed in my (password router access) WPA key manually on the screen of the Xbox system.

  4. I checked the settings of the Xbox Live and all my network automatically filled in information, and I was able to connect to the internet.

• GPIB bus schedule

  Hello

  I'm new to programming level of registry GPIB. I have some experience in GPIB, but my previous experience was using more higher level programming.  I try to control the GPIB bus with my test Board, which consists of a CPU + NAT9914, as well as the required transceivers.  NAT works in mode 9914.

  The screenshot I took a test result, where I intended to send MTA0, MLA7, DCL, OLA commands on the GPIB bus. Based on the screenshot, you kindly can let me know if the timings are correct, DAV, NRFD and NDAC, especially compared to the other?

  The diagram on the top 4 bytes sent via GPIB bus (40 h, 27 h, 14 h, 11 h). The diagram below is a zoom-in of the first byte (40 h). The vertical grid lines interval is 5 USD for the top chart, while 500 ns for the bottom.

  

  

  Thanks a lot and best regards,

  Hello WH Tan,.

  I checked your captures and checked the commands that you send through the bus.  The controller (the controller NAT9914?) with success all orders address and configuration of GPIB sends to the connected instruments.  Orders through are MTA0, MLA7, DCL, and OLA.

  Capture zoomed showed clearly that NRFD reported that the listener was ready for the data (by the listener), DAV then reported that the data on the bus is valid (by the talker) and the COMMITTEE reported that the listener has received data (by the listener).  Because of the handshake, we can say that the listener has certainly received the data.

  This configuration gives you problems?  If the instrument at primary address 0 has data to send, the instrument main address 7 must be configured to receive these data after that MTA0 and MLA7 are sent.

  I hope this helps.

  Steven T.

• With the help of two GPIB-ENET/100 boxes with ibconf - gpib1 selection?

  I hope this is the right forum for this post.

  I'm trying to use ibconf on Solaris to configure a workstation to use 2 boxes GPIB-ENET/100.  I have never tried to configure a computer to use multiple boxes GPIB-ENET/100 at the time, so I don't have a lot of confidence that I'm doing it correctly for two boxes.  Especially given what I describe below.

  According to the manual page 4-2 of the "Getting started with your GPIB-ENET/100 and NOR-488.» 2 for Solaris. "

  To identify your GPIB-ENET/100 in ibconf, perform the following steps:
  1. press on to select the option rename.
  2. type the alias name of host, host name, or IP address assigned to your
  GPIB-ENET/100 and press .
  3. press to exit, chooose to save your changes.

  I followed these steps for both boxes, but the banner at the top of the menu always says 'Card device for Council gpib0' and he always says "gpib0" just to top the host name that I go.  Shouldn't he State gpib0 first Board and gpib1 of the Committee on the second?  But I don't see a way to move to gpib1, or the unit of the second box ("Board") map.  Instead, it seems that I crushed the entrance of host name for the first box, I've identified using the steps above with the host name of the second box, that I've identified by following the steps above.

  I looked through the manual as well as fact a search online, nothing helps.  Which brings me to this forum.

  How should we do to get the pilot configured to use the GPIB-ENET/100 boxes?

  Thanks in advance.  Out of my ibconf is below (that's what it actually looks like, either incidentally - the strange on the line with dev2, dev13, and dev24 is not an artifact of copy/paste):

  ===============================================================================
  National Instruments GPIB Software Configuration utility Rev A.3.
  Copyright (c) 1991 National Instruments Corp.   All rights reserved.
  ===============================================================================

  File: / etc/gpibrc = CAPACITY: 8-plank 44 devices =
  ----------         -----------
  Press a key to continue * -.
  -----------------  -------
  ----------------  ----
  

  -------
  ----

  ===============================================================================
  National Instruments |    Card device for Council SPARCstation gpib0
  ===============================================================================
  -----------
  | GPIB0 |
  ----| nienetD |
  |   |_________|     * Use the cursor keys h, j, k, l & to select a device or a Commission.
  |                   * Use the buttons below to select the desired action.
  =====|------------------=======================================================
  | - 0 dev1 |-dev12 0 1 dev23 2 dev34
  = | - dev2 0 = = |-ev13 = 1 dev24 = 2 = dev35
  | - dev3 0 0 |---4 1 dev25 2 dev36
  | - dev4 0 1 dev15 1 dev26 2 dev37
  | - 0 dev5 1 dev16 1 dev27 2 dev38
  | - 0 dev6 1 dev17 1 dev28 2 dev39
  | - 0 dev7 1 dev18 2 dev29 2 dev40
  |---0 dev8            1 dev19           2 dev30                                                                   2 dev41
  | - 0 1 dev20 dev31 2 dev42 dev9 2 |-0 1 dev21 2 dev32 dev10
  | - 1 dev22 2 dev33 dev4311
  3 dev44
  |

  ^ Q: help ^ r: Rename ^ T: (de) connect ^ edit I: ^ o: output

  I just thought of it. My terminal has been updated with the ansi format. That was streaked the menu and blocks my view of the operating instructions ^ B / ^ F to see maps for more tips. The dockers affecting my vt100 terminal. You can even see how my menu was watered to the top at the bottom of my original message. I didn't know until now that the menu was supposed to look like different (although I knew it).

• Where are my missing Bccs after I click send

  I created an email that included in the body that I had received another email. My list of recipients was all BCC. I clicked on send. One of the CCO was rejected due to problems. No messages were received for the remaining BCC. I looked in the "sent" folder. None of the BCC were there. What happened to my BCC? Where should I expect to find?

  Stem

  For me to believe is not enough to let you know. -rodalsa

  No. I use Thunderbird.

  Following on from my post, I discovered that my email was not sent through Thunderbird. In fact, he always resided in my drafts folder in my revised State who has been with the BCC all rid of recipients except one who had not. I changed the address failed to which I hope might work, but had not yet sent. I had deleted all the ones I thought were already sent - prior to my having looked in the box feel - my bad.

  The piece of knowledge that I missed was that; Thunderbird sends all messages to the recipients if there is an error with one of them. After that ignorance, I did things that contributed to my post (I have to re - introduce a large number of addresses as BCC).

  rodalsa

• What is the best way to send personalized mass emails using Mac Mail?

  Attempts to send mass emails (in bulk) to a custom list of customers (less than 100) with a greeting / salutation. What is the simplest and cheapest way to do it?

  The App store has a few options, but not one with a qualification or a review. Online searches are not very convincing.

  Apple is usually easy to use and easy with these small details, but it is a nightmare, and I don't see why it should be so complicated (although I'm still hoping there is an easy work around or something, outside writing each message individually).

  Any help is very appreciated!

  In all honesty I suggest that you find a good online service to do it for you...

  http://MailChimp.com

  Or one of the many others.

  These services have the ability to manage the e-mail in bulk. E-mail servers will block your messages if you seem to be spamming, there are a lot of issues to be addressed (addresses failed, bouncing mail, management of requests to subscribe / unsubscribe...). I suspect it's more trouble should manage it all yourself.

• PXA N9030A

  Hello

  I'm new user for PXA N9030A I'm using labwindows I downloaded the installer msi file and installed I can see the AgSan component

  under the IVI solution and use API for controlling the camera but nothing happens.

  I did the installation program the GPIB address and disabled the GPIB controller in the instrument and can watch the orders in the GPIB spy to be on the bus.

  At first, I get the error unknown resource message.

  What should I do there are some whole upward into the instrument that I missed?

  

  Eugen

  Have you installed the IVI shared components?

  http://www.home.Agilent.com/upload/cmc_upload/all/readme_ivi_matlab_AgXSAnLTEFDD_1_0_7_0.txt?&cc=us&...

  Did you install Agilent IO Suite or NI-VISA?

• Photosmart 7515: Impossible to connect wireless to Photosmart 7515

  First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

  I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

  I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

  I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

  So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
  In advance, thank you!

  Nick.

  Hi @LoneRider,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

  Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• WAP54G Setup cannot find router

  I have (or better) a WAP54G 3.1, and a second that is configured as repeaters work.
  Accidentally someone pressed the button-Logo and secure-easy-setup-function enabled - of course, nothing did more work.

  I tried to reconfigure the WAP54G, but I can no longer access.

  I pressed the reset on the back button, but that doesn't help much. Now the situation is:

  The AP has an open, public WIFI named linksys - I can connect through which to the DSLrouter and to the internet.

  But I'm not able to find the WAP54G to configure

  192.168.1.254 IP address fails, no ping, no http. I tried the WLAN connected PC and also those connected by cable. I downloaded the installer, but that also claims he can not find any WAP54G, once both tried from a wired computer and from the PC (connected) wireless, firewalls on computers were off.

  local IPS are 192.168.178.xxx and subnet mask is 192.168.0.0 - and that 'invisible' grace WAP54G wireless connected PC received 192.168.178.1 dhcp 192.168.178.32 address and can access INet

  Anyone have an idea how I can configure the WAP54G?

  Sorry for typo IP, - yes of course faults by default est.245

  I was at my local store - the reason is simply that the misconfigured AP reset button did not work not today.

  Thanks for the help

• Discovery of groups of

  If I have 3 bays of PS6210 in a group connected to a cluster of esxi 6 via iscsi, the vmnic learn all ports eth EQ during initial discovery? I know that the group what IP is used for the initial discovery, so I'm looking for the relationship between the host and the EQ NIC after that.

  We are considering a direct controlled switch of our switches 1 g 10g switches, but we can not trolling the 10 g to 1 g. All network connections are redundant (the team network cards, etc.). I can give more details on the plan, but it depends on the response on the relationship of the EPF.

  Thank you.

  Hello

  The server never "learns" all physical port IP addresses.   PS Series SAN from Dell uses two characteristics required of iSCSI.   One is called 'login_redirect' and other disconnected "async".

  If you were to follow the connection process, when the server tries to connect to the discovery address fails, a specific error message, and a physical port IP address will be sent to the initiator.  Immediately it will then record in this physical port address.   When it comes time to balance a session iSCSI to another port, the server receives a request for "async logout" of the table.   Forcing them to disconnect and reconnect.  When the first process is repeated, and the connection is made on another physical port.

  That answer your question?

  Kind regards

  Don

• Spare MD3000 after warranty has expired?

  We have a MD3000 that is over 5 years old but still works fine.  However, I recently had a SATA 1 TB to address failed.  If I can find a Dell certified car, no matter if the firmware is the same?  For example, see picture attached of the failed disk.  Even if it was delivered with MA07, the table shows that he now runs MA0D.  If I buy the exact same drive listed with the MA08 firmware, will it work?  or, how can I upgrade the firmware to MA0D before replacing the defective drive?

  Thank you!

  Hello dkraut,

  As long as the replacement drive is a dell certified disk drive should be detected by the MD3000. Now once the drive is detected by the MD3000 so you can get the firmware on the drive so that it matches the other readers. Here is a link to the firmware of the hard drive for you MD3000. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=R291590&FILEID=2731115770&osCode=WNET&ProductCode=PowerVault-MD3000&LanguageCode=en&CategoryID=FW

  Please let us know if you have any other questions.

• BlackBerry Smartphones Addressbook troubleshooting with my BB Curve 8520

  I have the problem with the book addresses, failed to add a new contact, you cannot change the info from one of my contacts, could someone help me resolve this kind of things?

  Hello

  Welcome to the community

  This has been a recurring problem for the phones Blackberry OS5 and below. Please click the link below:

  Cannot change or create new contacts to the address book of BlackBerry

  Ron