ADF bound taskflow files divided into different folders

Similar Questions

• I want to run a SWF in several screens, is - it possible a .swf can divided into different part and meet

  I have a flash file, I want to split application in 4 different part and individually run on 4 different screens (monitors o/p). If this is then can not possible I develop 4 rows of 4 different screens, but how they can jointly associated with one application.

  I have the application developed in Adobe Flash CC but no problem to switch technology. Please suggest...

  Thank you

  Maury

  Yes, you should be able to do it with a bit of CODE.

  Apply a transformation scene (scaleX = 2, scaleY = 2) and change the x / y position corresponding to higher positions left, upper right, lower left, lower right.

  The export of 4 different sovereign such as each of them show only a quarter of the original film after processing and implementation in different points of view.

• Same version of files of Windows basic in different folders

  In a first time - it's not a question about deleting double files! That said, I would like to know why several 'identical' basic Windows files are in different folders, if it is the default, or if I should suspect malware activity. I am not a Curmudgeon, but I watch and try to understand the risks in order to keep my computer as clean as possible. Normally paranoid, so to say. Yes, I have searched the Net to find answers, but because each searchresult starts with registration of tons of methods how to Remove double, which isn't what I'm shooting, I won't and hope to have some answers here.

  Some of the files that appear twice are:

  Iexplore.exe Explorer.exe, rundll32.exe, cmd.exe, msiexec.exe. Also of Ping, Taskkilll, VMI Provider Host, WinMail, Windows Media Player and more. They seem to all reside in either 'C:\Windows\System32\' or 'C:\Winndows\SysWOW64\ '.

  My instinct says files are legitimate and there for a reason (Win32 Win64 vs?), but if so - why different pairs of size have the same version numbers? And why some of the pairs do not differ from just one byte (!) in size? Also - why Internet Explorer keep running 'normally', even if I killed the process (iexplore.exe) in the firewall and why do I sometimes get an error of "Explorer finished unexpectedly" Internet to the time when I close the browser? (Freely translated from Swedish)

  System information:

  DELL Precision T5500 w. Intel Xeon 5650 CPU, 12 GB of RAM and Swedish Win7 Pro/64 from an SSD. Version of Internet Explorer is 11. Lots of available storage place on quite 3 hard disks. There is also a domestic network with 3 computers, an iPad, and two printers. Several commercial versions of security software installed reside (MalwareBytes, HitmanPro, ZoneAlarm AV + FW), as well as occasional safe mode analyses, or online, with free stuff (SuperAntiSpyware, HouseCall, TDSSKiller, CCleaner, etc.). No unusual activity not found yet, the system is apparently clean.

  Are the files of normal behavior part?

  Please notify. Thank you!

  On most systems, the folder that 'account' is the folder C:\Windows\System32 (assuming that Windows is installed on your C drive).  On a 64-bit system, those will be 64-bit on those files.

  In the 64-bit installations there will also be a SysWOW64 folder (not present on 32-bit systems) that will look much like the system32 folder.

  The SysWOW64 folder (Windows on Windows) is where Windows keeps 32 bit copy of an application that may be required from time to time on your 64 bit system.

  The files in System32 and SysWOW64 may be the same, they may be a little different, they may be very different but Windows will use the appropriate files when it should.

  If this sounds like a behavior very normal and expected.

  Don't know what 'why Internet Explorer continue to function 'normally', even if I killed the process (iexplore.exe) in the firewall' means (how can you kill IE in the firewall?).  Why do you have to kill the process of IE in the first place?

  Windows comes with a built-in so firewall if you have installed ZoneAlarm and use its firewall, this facility should have been smart enough to disable the built in Windows Firewall.

  It is not a good idea to run two firewalls at the same time, so if you are using ZA firewall you might want to pursue firewall issues and problems in the ZA community where experts hang out:

  https://www.ZoneAlarm.com/Forums/Forum.php

• Storage vMotion + vmdk files in different folders

  Hello

  Storage vMotion will spend the vmdk files [in 2 different folders on the same data store for the moment] in the same folder while that migrated to the different data store?

  Why the vmdk files are in 2 different folders:

  Windows 2008r2 was misconfigured evil so anything by rebooting, it went to the system recovery. Was not able to recover the system.

  The system was rebuilt, and 2 D: and E: drives were attached ["use an existing virtual disk"] as of the existing vmdk disks to the new virtual machine.

  So drive C: [rebuilt VM] vmdk file is located in files vmdk D: & E new-vm-folder & readers are old-vm-folder.

  So "storage vMotion will pass the vmdk files [in 2 different folders on the same data store for the moment] in the same folder while that migrated to the different data store? I know that storage vMotion and change of name of the files/folders works well.

  If this is not the case, what would be the best practice to get is sorted?

  Thank you very much

  Pawel

  Welcome to the community - Yes it will be. The other option would be to turn off the cold and virtual machine migrate the virtual machine to the correct data store.

• IX4 - 300 d / General SIN: How can I move large files between different folders?

  Hi @all.

  My new IX4 - 300 d arrived yesterday

  After doing his RAID-things all night, now I want to move my files from my old NAS to this one.

  I do this using Copy-supported by the ix4 - 300 d, which work fine.

  A big problem for me: I want to reorganize some large files / directories (> 200 GB), so I have to cut and paste the files from one folder to another (all on the ix4 - 300 d, but with different user groups).

  When I move files between subfolders in a folder of the sin, it works fast enough - I think here that the transfer will be treated directly by the nas server.

  When I do the same thing between subfolders in different folders (which appear as various network drives in windows Explorer), it seems that the transfer is managed by my pc or laptop - and it is very slow...

  I tried to move the files on my network environment (all folders are subfolders of a server: ix4 - 300 d) because I thought the problem was in my network mapping, but it does not work faster.

  How will I know my ix4 - 300 d to move the files directly (without the "help" from my pc)?

  Another idea for me was to do it via ftp, but my ix4 - 300 d only refused my connection (have to try a little more)

  Please help me

  I "solved" the problem by creating a copy of the temporary employment with the manual removal of duplicates once the task is completed. The copy job run all night.

  For future problems, I must think of an another "file management".

  Thanks for your response!

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Why my video files are divided into segments?

  I'm new on Premiere Pro and previously used FCP 7. I shoot a Canon Vixia HFM400, which is the AVCHD file format is. MTS. In FCP 7, I used to be able to insert my SD card into my card reader, open FCP 7, then go to file > Log and transfer and a video file of an hour to be ingested without any problem.

  Now, using Adobe Premiere Pro, I don't have a "Log and transfer" option, so I import my files .mts file stream from my SD card on my hard drive and import them in PP. However, with video files any longer, I noticed the .mts files are being divided into segments of 16 minutes. I tried just to put them back to back, and while the audio seems transparent, I lose a few images on the video, which makes it a little nervous. How can I fix? What I need to copy the structure of the entire file from the SD card? The only reason why I have not done it is pictures on the card that I can't import for this specific project. However, I read on other forums that it can solve the problem. I can test it, but I wanted to just make sure before wasting my time...

  Yes, you will need to copy the overall structure of the file on your hard drive and then use the import media browser if you don't want your film to segments.

• Move emails into local folders only removes them from the Inbox folder

  Hello.

  I use Thunderbird to check out and check all my mail for GMX.net. Since I want to only do this sporadically, I opted for the portable version (currently 31.4.0).) Download works very well and does move emails into local folders. However, when I checked the size of the Thunderbird folder, it seemed a bit heavy. Turns out that all mails were stored in two places - the Inbox folder of reception/mail (such as pop.gmx.net) AND in local folders (in separate files, reflecting the local folder names).

  Is this a normal behavior, can I disable it and simply delete the Inbox file manually without break?

  Here are the steps I followed:

  (1) create a local folder ('Hello')
  (2) ctrl + an Inbox in
  (3) right click, select move - local folders - 'Hello '.

  A lot depends on how you configure your pop server
  What to do with the deleted files and if keep you them on the server
  and what you do on files properties

  And compact your folders

• HP Pavilion dv6: screen divided into 4

  Please, the machine restarted when I got a BSOD whith the memory management code, after having resolved, my HP logo divided into 2 a top and a bottom, but is returned to normal, it does this for about a week and this time, he does not return to normal

  so I started at the login screen and I saw that it was 4 with 2 vertical on the right full screens and 2 screens of half verical on the left

  so I reinstalled windows, but to no avail.

  I've also updated my drivers buht

  I connected to an external monitor, it looks perfect

  Name of the OS Microsoft Windows 10 Pro

  Version 10.0.10240 Build 10240

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  Name of system OFFICE-ACO8E6T

  System manufacturer Hewlett-Packard

  HP Pavilion dv6 Notebook PC model system

  X 64 PC system SKU C2Y45AAR is of Type #ABA

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.26, 03/04/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  Start secure State

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume2

  The local United States

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  User name of OFFICE-ACO8E6T\LIVINGSTONE

  Time zone Pacific Daylight Time

  Physical memory (RAM) installed 8.00 GB

  7.89 GB total physical memory

  5.57 GB available physical memory

  9,77 GB total virtual memory

  7.42 GB available virtual memory

  Pagefile 1.88 GB of space

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware Yes

  Hyper-V - data execution Protection Yes

  Hi @OPTIMISTICSTONE,

  Thank you for joining the HP Forums!

  I noticed your post on how your screen divided into 4 with your HP Pavilion dv6 Notebook. I'm happy to help you!

  What is the number of product/model of your HP Pavilion dv6? How can I find my model number, serial number or product? There are several versions, example: HP Pavilion dv6500.

  For now, maybe the steps described in this guide will help. Solve the problems when switch between views using FN + F4.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this guide to solve your problem!

• Can put photos into individual folders?

  I like to organize my photos and put them in different folders, e.g. friends, family, pets... How can I do this? I thought 'my pictures' and 'images '. I tried to download images & their files from my old phone to my computer for the backflip and none of them transferred.

  You can create an unlimited number of tags, but each photo can have only 5 total labels applied

• Video playback is divided into 4 pieces and is black and white

  Video playback is divided into 4 pieces and is black and white HELP!

  Hello

  1. you play the videos online? If Yes, what browser you are using?

  2. If you play the video with Windows media player, which is the version of Windows media player you are using?

  3. who is the operating system installed on the computer?

  4. If you play the video with Windows Media player, what is the format of these files?

  Please answer us with more information about the issue to help you.

  If you use Internet Explorer refer to this link: solving video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  If you use Windows Media Player to refer to this link: Fix Windows Media Player video and other media or questions Library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  I hope this helps!

• start the Web server in different folders

  I developed a compiled VI (Smarts - Net .exe) that has been designed to operate in a specific folder (\Smarts-Net) and activated the Server Web page of Smarts - Net .html in the same folder.  So far so good.

  The application receives data in real time produced another of our programs and generates graphs to show "what happens".

  My clients would like run multiple instances of my program for their customers, but want to isolate their customer 'A' customer 'B' so that they cannot display the data on the other.  I can start my application using different IP ports so that I can have multiple views, but I want to further isolate the data of the customer in different folders.

  I did a 'manager' program that will create a subfolder of the folder in my main application (\Smarts-Net) so that it would appear as "\Smarts-Net\JobA" and copy all the files in the main folder in the new subfolder.  I then change the of Smarts - Net .ini file with the new pathname of the file and the new port like this number:

  [Smarts-Net]
  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  Server.TCP.servic = "My Server computer/VI"
  server.vi.propertiesEnabled = True
  WebServer.DirectoryIndex = "index.htm"
  WebServer.LogEnabled = True
  WebServer.LogPath=C:\Smarts-Net\Logs\Smarts-Net.log
  WebServer.MimeTypes = (a LOT of Mime types in here... I left aside for this post)
  WebServer.Port = 9501
  WebServer.Enabled = True
  WebServer.RootPath=C:\Smarts-Net\JobA
  WebServer.TcpAccess = "" + c * ' "
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = False
  DebugServerWaitOnLaunch = False

  After you change the .ini file, I start the application (Smarts - Net .exe) to the new folder.

  This is where I need help.  If I try to display the VI from another computer using an address like http://snape:9600/JobA/Smarts-Net.html, I get an "HTTP 404 - File not found" error.  But, if I try to http://snape:9600 / Smarts - Net .html, I get the VI Panel!

  Thus, it seems that I can change the Port in the .ini file, but not the RootPath.  Does anyone know how to get the html to load from a different folder from the one specified when I created the application code?

  Hello Steve,.

  From your description it looks that the web server is already doing what you say you need for.

  There is a difference between the URL path, the path that is entered in the browser and the path of file system, the location of the file on the disk.

  The WebServer.RootPath token specifies the directory of the file system that corresponds to the root directory, "/", in the URL. You have specified C:\Smarts-Net\JobA as root your path so all files in this directory will be the URL of the http://mycomputer:myport / myFile. If you want the URL of http://mycomputer:myport/Logan/myFile then you need to have your root C:\Smarts-Net\ directory.

  Does make sense?

  Nathan

• The screen is divided into 4

  Hi, can anyone help?
  Suddenly, my screen is divided into 4, which means there are now 4 miniature versions of everything I do. Everybody met it before and there at - it a way to back to normal?
  Thank you very much.

  Hi, Luce,.

  Right now this looks like a harware problem - probably your video card or monitor. First of all lets check to make sure that it is not not a parameter.

  1.), right click on your desktop and click Customize. Then go to display settings. In this window, set your resolution to a lower setting by moving the slider to the left.

  2.) If you have a trial office, have disconnected and reconnected the connection to the monitor. If that does nothing, try connecting a different monitor and make sure you use another cable. If this does not work, you must have a tech look at your video card.

  Thank you, Jeremy M - Support Engineer

• Option on each folder to sort (sort different folders differently)

  Hello!

  Some of my folders I want to sort (to detail), by name, in other folders I want to sort by Date.  In Windows XP, when I would choose a sort option would apply to this folder.  Now in Windows 7, it seems to have only a single type by default that applies to all files?

  How can I specify rules for different folders of different default sort?

  Thank you

  John Voight

  To all,

  I found great difficulty: simply open the files directly, no not as a library.  Then he remembers its sorting.  Simple as pie.

  JV

• How can I put my picture in the order dates and different folders?

  * Original title: Photos

  Two questions:

  How can I put my photos in chronological order?

  How to put photos in different folders?

  Thank you very much!!!

  Thanks for posting your questions about Microsoft Community.
  To help you better could you please clarify a number of things like:
  1. you try to change the default location where your pictures are saved?
  2. you are trying to run out of your pictures in cronological order?
  3. you try this in Windows live Photo Gallery or Photo Live Tile or file Explorer app (for example the folder my pictures)?

  4. you try to export photos from any external hard drive?

   
  However, I suggest that you do the following if you want to sort by Group by and reorganize by elements in the Windows Explorer 8:
   
  To set the view for column ' sort by ' for items in a folder or library in the file Explorer
   
  1. in the file Explorer, open a folder or library that you want to sort the items in a column in and do step 2 or 3 below.
  2 click/tap on the view tab, click on/tap on sort by in the Ribbon, select (dot) retail (ex: name) you want to sort items by and then go to step 4 below. (see screenshot below)
  3. right click or press on and hold on an empty area in the open folder or library, click/click on sort by, select the detail you want articles to be sorted by and proceed to step 4 below.
  NOTE: If you wish, you may click/click on more to add more options.
  4. If you want to sort the items in ascending or descending order, you can do step 4a or 4B below.
  NOTE: Ascending is the default setting.
  (A) click/click on the column name in the bar of the column until the name ascending or descending by name how you want.
  (B) repeat step 2 or 3 above and select Ascending or descending.
  5. If you wish, you can also do OPTION TWO, THREE or FOUR below for further match the elements in this point of view if you wish.
   
  To set the column view "group by" items in a folder or library in the file Explorer
   
  1. in the file Explorer, open a folder or library that you want to group the items in a column in and do step 2 or 3 below.
  2 click/tap on the view tab, click on/tap group by in the Ribbon, select (dot) retail (ex: Type) you want items to be grouped by and go to step 4 below.
  3. right click or press on and hold on an empty area in the open folder or library, click/click on group, select the detail you want articles to be grouped by and go to step 4 below.
  4. If you want to sort the items in ascending or descending order, you can do step 4a or 4B below.
  (A) click / tap on the column name in the column bar until the name of the ascendant: ascendant views: size: or descending name: views: size: set how you want.
  (B) repeat step 2 or 3 above and select Ascending or descending.
  5. If you wish, you can also make ONE OPTION, THREE or FOUR for further match the elements in this point of view if you wish.
   
  Also I suggest that you take a look in this web links to additional References:
  http://Windows.Microsoft.com/en-GB/Windows7/arrange-sort-or-group-your-files
  http://Windows.Microsoft.com/en-us/Windows-8/files-folders-Windows-Explorer
   
  Also if you are interested by adding metadata to your images (as when and where it was broken, etc) Please take a look at this link:
  
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_8-pictures/edit-metadata-and-tag-photos-in-Windows-8/9e1a7bd9-977b-4ECA-8fa7-0f61368d896c
   
  Please get back to us with the required information, and we would be happy to help you.
   
  Kind regards.