Adjustment brush problem

Similar Questions

• Camera Raw adjustment brush problem v8.7.1

  I use Adobe Bridge and my problem is in Adobe Camera Raw 8.7 and 8.7.1 himself. Click brush position slider and the actual surface that will be painted is not in the same area. As you can see in the photo below, the actual painted area is compensated on a cm off the slider you click position. Only the adjustment brush is affected. What is more, the cursor is bigger than usual and the color turns to black instead of white. Hope someone can help give a solution or if all goes well, Adobe may solve the problem.

  
  

  
  

  Hi all

  I found the bottom of the problem. The problem is the font size in the operating system that has been increased by more than 100%. To resolve this problem, change the font size in the operating system to 100%. After the change, disconnect and connect the PC and the cab problem has been resolved. Hope it helps someone in the future, who has encountered this problem. See the steps below.

  I really have to thank you everyone trying to help solve this problem.

  

• Lightroom CC (2015) adjustment brush problem. Adjustments before brushing showing upwards.

  Thus, it seems that something's wrong here. Every time I have activate the adjustment brush and make adjustments before brush in the base Panel, their impact on photography in the world, even before I paint. I feel like I'm missing something from earlier versions. You should be able to activate the brush, dial in your settings and nothing happens to the photo UNTIL you brush, not before. To make matters worse, if I try to use the adjustment brush after global settings, it changes just all the global settings and the overall look of the picture.

  Thoughts?

  Hi Matt Hensler,

  It seems that you have used the exposure in the base Panel slider, allowing to apply the exposure to the entire image.

  Please click on the drop down button highlighted in the image and make the changes here to apply on the part selected by the adjustment brush.

  

  Please let us know if that helps.

  ~ UL

• Lightroom CC - problems with the adjustment brush and stain

  Weird question:

  End of 2012 iMac 2.9 GHz Intel Core i5, 32 GB of RAM

  Mac OSX 10.11.6

  Lightroom CC

  When you attempt to change a series of photos in the develop module I have problems with Lightroom gel. More precisely if I use the spot removal or adjustment brushes after two or three images, I find myself with a progress indicator of spinning at the bottom right of the image and the screen shows part of the image strong and part of the blurred image (as when loading an image is). It seems that no amount of waiting will lead to progress. All I can do is quit Lightroom and restart. But after a few images that the same thing is happening.

  If anyone else has experienced this?

  TIA.

  Try to disable the GPU acceleration

  Go to the preferences, click on the performance tab, uncheck the box

• Soft Proofing and adjustment brush / Spot removal problems

  Hello

  Since the last update (at least I think) to 6.5 that I have a problem when soft proofing is turned on. In particular, the adjustment brush and the brush of spotting does not work smoothly. The first problem is that when you try to make smaller or larger brush (keyboard and Tablet) the brush shows the size have immediately brush outside the window or click on the image to see the size of the brush (brush of detachment and adjustment) and the cash withdrawal is very slow and if I want to spend the part I want to remove to make it better appearance it does not update immediately when moving. Also when using either the computer fans brush starts to kick in and work hard. Tried two GPUs and extinguish the same result. but as I turn soon soft proofing off the coast of the brushes as planned work and also the fans to stay out of

  so if someone has problems with these two brushes you might want to look into the option to see if Proofing is enabled

  I have not noticed this. However, I usually do all my withdrawal in cash without proofing turned on. Normally, the only thing I do when the soft proofing is set things like saturation, lights and shadows. Things that affect the overall appearance of printing based on the book that I use. What are the specifications of your computer? OS, RAM, etc.

• Problem with the local adjustment brush

  Problem with the local adjustment brush:

  Tire of a photo with the iso 6400 to a person and I wanted to increase the exposure of the face only. So I set the exposure compensation of at least 4 local adjustment brush, in order to see where I paint. In earlier versions of lighroom I got a smoth black area. My intention was, and then adjust the brightness to + 0.33 in order to get a slightly lighter face. But I have no black smoth area. Instead, I largely perforated black area. After setting the exposure to + 0.33, the face was indeed more light, but with many large tasks very ugly.

  The brush settings:

  Fat / size was 7.1.

  Weiche Kaiser / smoth edge was 50.

  River / stream was 60.

  Dichte / density was 100.

  Automask has been verified.

  Any ideas?

  Maybe it's because you have "Auto mask" checked the.  Uncheck the box before painting to see if that helps.

• adjustment brush works a little

  Hi, I Lr CC, 10 Windows, when I use the adjustment brush I need to go all the way upwards or downwards (e.g. an exhibition) to see the much adjust, hide Auto, density 100. Can Sbdy indicate what the problem is? Thanks in advance!

  Hi studioryba,

  Make sure that the flow slider is set to the maximum value.

  If this does not help, suggest you to reset the preferences of Lightroom: given to zero (or "Trashing") the Lightroom preference file. Lightroom Forums

  Also, make sure that the program is updated: keeping up-to-date for Lightroom

  Concerning

  Claes

• Lightroom CC gel when you use the adjustment brush

  I recently discovered the power of the adjustment brush for Dodge & burn my RAW photos. I am progressing through a photo editing however, my Mac gets slower and hangs with the beach ball. I upgraded my RAM from 8 to 16 GB and updated from a disk to a 1 TB SSD HARD 750Gig, but it always crashes when I get into an editing tool. My computer is a MacBook Pro 13 "(mi-2012), processor: 2.9 GHz Intel Core i7, memory: 16 GB 1600 MHz DDR3, graphics: Intel HD Graphics 4000 1536 MB." In the Lightroom preferences, running, I get an error message when I click use GPU: "acceleration of the graphics processor has been disabled due to errors. Everyone knows about this problem? It drives me crazy. Surely I don't have to buy a new, more powerful Mac just to use the adjustment brush properly?

  This slowdown/gel is a known problem with make a lot of adjustments and/or healing spot on a single photo.

  There are a number of possible remedies

  1. Get a faster CPU (speed of the car and the amount of memory and power of the graphics card will not affect this problem)
  2. All of your brushing and/or spot as the next step in the last edition and the last step, the healing light up any correction of lens (if desired)
  3. Make the brush in Photoshop Elements or Photoshop

• Lightroom adjustment brush unusable / slow and erratic

  I recently updated my version of Lightroom CC and when you use the (with and without overlay) Lightroom adjustment brush becomes incredibly slow or even unresponsive. Not only that, but it produces brush strokes I have never know I'll use the brush on a domain and then stop to wait and see before shots, I did fill, for what appear to be from 10 to 20 seconds on average, which in itself is quite unacceptable, and Lightroom then proceeds to do a big blow at random areas I never even flew over especially brushed in. So I'm going to clear this erroneous line randomly, the problem repeats itself in that it removes not only the error, but also a part of what I have completed only. Which was a montage of 5 minutes, senior, is now a test of long hours with mediocre results at best. So far, I tried to update the drivers, change the size of the cache, giving the Lightroom process a priority higher with so many reboots, I think my power button is about to fall. My computer has 32 GB of Ram, 5930K i7, EVGA GTX 980Ti, with m2 and Reg. SATAIII. SSDs running windows Pro 10. Many years of operation of older versions of Lightroom on an Early 2009 Mac Pro and MacBook Pro 2014 mi, I am more confident that I have enough resources in my machine to slam lightroom died several times in the course and of course when I check my task manager, I can see that lightroom scratches barely 10% on my CPU and at best he is gone up to 4.4 GB RAM date on which It was insensitive. As far as I can tell my computer does not have the heavy loads in one of its components it is nice and quiet.

  Any help on this would be much appreciated: How can I get Lightroom to use more than 10% of my resources? How can I get the adjustment brush to work? Is it possible to downgrade to we'll tell LR4 or LR5? Any help to improve this mess so I can actually finish my work.

  Thank you.

  Chris

  P.S., Photoshop, Illustrator, InDesign, holders, Hasselblad Phocus (for trial) work fine without any problem of freezing or seizure.

  Hi christopherw,

  Please turn off the graphics processor of Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  Mohit

• Local adjustment brush dot does not appear

  I usually do some local adjustments with the brush in my photos. If I want to go back for an older fit, I click on the point for her. But now the points are not displayed. Can you help me? Thank you.

  Thank you! I didn't know that they were called edit pins. In if someone else never looks it: apparently by clicking on "control h" when using the adjustment brush solves the problem too.

• Lightroom CC hangs with the adjustment brush

  Hello world!

  I have a problem with Lightroom CC. whenever I try to use the adjustment brush, the whole program just disappears from the display. I open it again, and it says that the program quit unexpectedly (obviously). I use an iMac of 2.9 GHz with OS EL Capitan 10.11.4.

  Thank you!

  Hi Apple Geek faithful.

  Make sure that the program is updated to CC2015.5: keeping up-to-date for Lightroom

  Also, suggest you to reset preferences Lighroom and then check: given to zero (or "Trashing") the Lightroom preference file. Lightroom Forums

  If this does not help, share the accident report.

  Concerning

  Claes

• I don't see the pin of an adjustment brush.

  I found this in Lightroom help:

  <

  Working with multiple local adjustments

  When applying and working with multiple local adjustments, keep in mind the following:

  • Click any pin to select it. A selected PIN has a black Center. Pins not selected are white Uni.
  • Press H once show the PIN selected; Press H to hide the pins; Press H once to show all pins.
  • When the adjustment Brush tool is selected, there are only the stems of adjustment to change. When the graduated filter tool is selected, only graduate filter pins are available to edit.
  • The adjustment Brush tool drawer allows you to specify options for two brushes, A and B. Select a brush by clicking on the letter, or switch between brushes by pressing the forward slash (/) key. Brush options "stick" regardless of the effect that you choose to apply until you change them.

  >

  My problem is that it does not work as advertised. I experimented on a photo and you can do my brushes A and B. But I see that edit for A PIN. The pin code of B shows ever upward. Hitting H repeatedly is that toggle the visibility of the pine has.

  Nevermind, I just found out what that mean make a new brush. It is not A and B, but there is another control called New just under the icons for picture adjustments. I'm not sure what the logic is behind having an and B as a brush. They become two brushes controlled by a PIN.

• I have Adobe Lightroom installed on 2 computers. One works perfectly. On the other machine, the adjustment brush does not work.

  I have Adobe Lightroom installed on 2 computers. 1 works perfectly. On the other machine, the adjustment brush does not work. You can hear the fans in the Gallery of the computer up as if he is trying to work. All the other features do not work. I uninstalled and reinstalled Lightroom cc, but this does not solve the problem. Both computers are running windows 7 Professional 64-bit

  Hi Marc,

  Suggest you to reset preferences in Lightroom and then check out.

  Refer to this article: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  Kind regards

  Claes

• Lightroom adjustment brush suddenly does not work as it did before

  I work on some photos and use the adjustment brush effects (softening, teeth Whitener, etc.). When using these effects, I left the preset values and they worked very well on the images I just changed. However all of a sudden I noticed that any effect of brush has been improved a LOT more when I started to edit another picture in the game. For example, the teeth whitening is suddenly VERY white and the edges are so obvious, but the values have not changed. I rechecked all my teeth before bleaching and the values are the same. I quit Lightroom and restarted but the problem persists. If anyone has experienced this? Any solution? Thank you

  Thank you Benedict. But I think that my problem was that I had accidentally changed the pen of the brush to zero using one of the shortcut keys. Now that I put back it to 100 it seems to work again. See when I was clicking on a previous setting (eg. a teeth whitening)-it shows me exposure, clarity values, etc., but it doesn't tell me the details of the brush that I was using (pen, flow, density) - brush values remain the same, if you click a setting previous or not - and that's why I thought that the previous setting has been done using the current settings and so why I wasn't with the same settings I was confused get different results.

  Thank you very much for your help in any case, I appreciate it

• The adjustment brush does not work.  I choose and the pin code will appear on the image, but when I paint with it, nothing happens.  Even the mask won't show too much.

  I have Lr 5.7, the adjustment brush has stopped working.  I upgraded to Lr 6 and still an adjustment brush does not work on both versions (running on the same PC)

  I have antivirus programs and malware which have rubbed my machine, no problem.

  This is the first problem I encountered.  Seems to have worked very well last week, then all of a sudden this function is toast.

  Help.

  Press O to display the overlay that shows the painted mask.

  Make sure that the density and the flow is not set to 0.