admin account will refresh all user accounts

Similar Questions

• an automatic disk cleanup will clean all user profiles

  We have a couple of departments which are 24/7 and every shift computer shares.  There are well more than 10 active users this connection to each of these machines.  This is obviously not ideal configuration and system offset is widespread, even shortly after image.  Unfortunately, I am not able to implement the major changes for these departments as a whole, but at least, I would like to find a way to maintain the systems function properly these guys here.

  would it not possible to run the cleanup utility to drive as a daily scheduled task so that it would be clean all profiles on computers, not only the current profile? * preference, will be little or no user interaction.

  users are not likely to run themselves (even with instructions) and reset all passwords to open a session manually for each of them is not only difficult and time consuming, but would cause more problems than it solves.

  so in short, we need something that can function, automatic or manually, which will wipe the WHOLE - all profiles of school boards - drive connected with admin account.  I hope that schedule a task to run the complete cleaning of the drive is the answer, but none of the research I've done today has been spent on this aspect in detail.

  suggestions, tips, welcome to miracles.

  / Thank you very much

  Clear cache files will be only to make the computer slower, more bandwidth allows to re-download and repopulate the cache.

  It will cause your computer is slower and your bandwidth to be used more, but if you wish, you can probably just set your browser temporary empty files when you exit.  Whenever you visit a page to re-download the image/script/code active once again, but if you have a fast connection and don't care about the lag, that's fine.

  As for the help of a cleaning program: it will clean all that he has access to clean. So, in a typical scenario, the task would need work as an admin account, so he has access to all profiles.

• Apply security to Dim will lock all users?

  If I modify a dimension of XYZ and select apply security, all users will be locked out of this dimension after that? I guess just that nobody will access what anyone in this dimension until an admin assigns READ/WRITE rights to the members of this dimension?

  Hello

  If you select the dimension to use security then forms will return an error message and is not not visible until you apply permissions for members in the dimension.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Is it possible to create a master password that will work on all user accounts?

  I have 4 user accounts on this computer.  3 are standard, for my children.  One is my admin account.  I want my children to have their own secure password, but I still want to be able to connect to their accounts.  Is it possible to create a master password which will allow me to connect to all 3 standard accounts?  One password to rule them all, so to speak?

  Help!

  Thank you

  cpalmer122958

  I have 4 user accounts on this computer.  3 are standard, for my children.  One is my admin account.  I want my children to have their own secure password, but I still want to be able to connect to their accounts.  Is it possible to create a master password which will allow me to connect to all 3 standard accounts?  One password to rule them all, so to speak?

  Sorry, this is not possible.

• Windows Vista, the user admin account will launch any .exe files

  Windows Vista, user admin account will launch any .exe files without using the right click "run as administrator. You get invited to associate the file with a program when you try to start an .exe file by double-click of left mouse.  Why is this happening? I also did the registry repair as suggested on Microsoft Website using cmd prompt ' (which also requred me to use run as - to run that, even)... any ideas?     -gene

  The .exe fix works with Vista and Win7, but also XP. MS - MVP - Elephant Boy computers - don't panic!

• Cannot connect to my admin account and cannot change my standard user to the admin account

  I have 2 log ons, as administrator and the other is a standard user. Something happened that doesn't allow me to connect to the admin. Profile, but I can't the standard user and when I go to user accounts and you're trying to change that one to the admin. privileges, it doesn't let me change the account type. I recently purchashed Defender Pro 15 in 1 more all-inclusive anti-virus. Previously I was using Avira Antivir free House as my anti virus with no problems for a year or two, but then this happened if I installed the Defender but I can't access to half of what I need to do is no not Admin, any help would be greatly appreciated!

  Hello

  did you uninstall Avira before installing Defender Pro?

  2 aVs installed will cause blockages of the system or problems

  "Something happened that doesn't let me log on.

  and you don't give an error message on your admin account opening

  We need error messages to help you

  Uninstall Avira or:

  try a Safe Mode system restore to before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 7 Home Premium - all user accounts have disappeared after the update of Windows...

  My Windows 7 Desktop is really watered.  After a Windows automatic update, none of the user accounts appear in the login window.  Only a generic connection where you will need to enter the user and the password are displayed.  And when I enter the user name and password, I get a message that they are not valid.

  Here are a few additional pieces of information:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  2. my other restore points I had before the update are no longer available.  I don't know what happened to them that they do not appear on the screen of restore points.

  3. I can't log on to the computer at all, none of the accounts work.  I can get to a command prompt by using the repair disk, and I can see all the folders for the users.  So everything is intact.   Something must have happened to some system files and thus connect is not possible.

  4. users appear in the list of profiles in the registry.

  5. no windows service start because none of the users are no longer valid.

  6. I tried sfc/scannow, but I get an error "already waiting.

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  I tried searching online and I'm still not able to connect to the computer.  It has been 2 days of downtime.  What happened to my old restore points?  And why doesn't my restore points created by the work of windows update?

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  Any advice would be much appreciated.

  Greg Lang

  E-mail address is removed from the privacy *.

  Here are a few comments:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  -> Which files are missing? Can you give an example?

  2. my other restore points I had before the update are no longer available.

  -> This happens after the automatic updates.

  5. no windows service start because none of the users are no longer valid.

  -> How to tell you, because you were unable to connect?

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  ->, I guess you have done this so that in the WRE (repair Windows environment). It is a ghost environment that disappears that you restart the system. Drive X: is a virtual, not a real disc.

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  -> Many people are unaware of the need for regular backups (for example, weekly) until they are suffering from a major disaster.

  Suggestions

  Going by your description, I suspect that your existing accounts are irreparable. They need to be rebuilt. User data appear to be safe.

  Option 1. Use the console commands then in WRE to save all the files of the user on an external hard drive. A disk 2.5 "500 GB in a USB enclosure costs less than $60,00. After having tested the files on another machine, perform a destructive factory restore.

  Option 2. Start the computer with a boot of Ubuntu CD, then its GUI allows to save files to the user. It takes time to burn such a CD, but the copy process is easier. When you're done, do a factory restore.

  Option 3. A somewhat complex process allows you to create a new admin account, and then use this account to create new user accounts. You must then manually configure each of them (for example Outlook) and move their records of the old data to the new profile folders.

  There is also a method to restore old files registry of a set of backup files are a few days old. In your case I wouldn't consider as it would create a disjoint system: the registry files refers to a set of files that have been largely modified by the update.

  Post again if you need more detailed instructions for the option that you favor.

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215

• I can not change the type of standard user to the admin account.

  I had a very difficult time, adding new accounts to the system.  Now that I have, I can not change the type of standard user to the admin account.

  As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
  1 restart in SafeMode with network.
  2. log on as an administrator.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following commands and press ENTER after each:
  NET user
  (This will show you all existing accounts)
  net localgroup administrators 'xxxx '.
  (This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

• cannot access the files of another user with the admin account

  I'm on a computer with Windows Vista 64-bit home problems.
  I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
  Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.

  I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
  Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.

  I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.

  What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?

  What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?

  How can I use the powers of the administrator to access other files (regular) user?
  Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.

  I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
  I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.

• Only the user is a Standard user, how do I get an admin account?

  Hello

  Windows 7 Pro

  When I set up this new computer, I created the main account as a standard user. Bad move. Now when I try to make changes, I invited him UAC with an inactive "Yes" button. It is said to enter an administrator password - it is not one that I know. I'm not able to use the cmd as administrator either. I have to reinstall Windows to fix this? I tried several suggestions that I found on the web (safe mode, etc.) and nothing gets done by the UAC.

  Thank you!

  OT:

  Only the user is a Standard user,

  Sorry, I have reflected on something else when I wrote 'choice 4 '.

  First, note the comment at the top of the page I linked to:

  Theoretically if you do not have an administrator account, the built-in Administrator account should be available in safe mode (see also related articles). For any identified reason, the built-in Administrator sometimes to be unavailable in safe mode.

  So, the first thing to do is to reboot safe mode and see if the built-in Administrator account is here.  I will not delete my Admin accounts to test this situation.

  Assuming that the built-in Administrator account is NOT available in Mode safe...

  The link I gave you, the two method I (32-bit only) and method II require you to "open a command prompt at startup" and give a link for directions to do so.  If you go to this link, there is a 'Option One' which uses the installation of Win 7 disc and a 'Option 2' that tells you to use the menu of Boot Options to boot into "Safe Mode with command prompt."

  However, Safe Mode with command prompt not automatically you will get an account with computer administrator privileges, and I suspect that you will not be able to make registry changes suggested that way, despite the generally good reputation of sevenforums.com.   So, use the Windows 7 installation DVD to display the "System Recovery Options" and then select "Command Prompt" there.

  Assuming that you do not receive the built-in administrator enabled account, log in, create a new account and give administrator privileges.  If you intend to use this account for anything other answering the UAC guests, create a second administrator account, "just in case."

  Finally, open an elevated command prompt (right click > run as administrator) and use the following command to disable the built-in Administrator account:

  NET user administrator / active: No.

• Screen black on the Admin account, but not on the standard user account

  Run a laptop Toshiba Satellite with Windows 7 Home ultimate. At startup, I log onto my user account. Some time later, I can access my admin account. Twice in two months after logging in to my admin account, the screen was black. The normal icons and the cursor appears. On the right side of the taskbar, the normal icons are displayed. On the left side of the taskbar, only the Start button appears. When I click on the Start button, it seems normal and programs will start when I click on them. However, the search of files and programs does not work.

  The first time that has happened for a reason system restore did not work. I guess my antivirus system work even if I had turned off temporarily. Basically, I created a new admin account and then copied the files from the old account to the new account admin.

  During the problem that I can connect and disable the account of user with no problems and everything works normally.

  I did a system restore and then I was able to access windows Explorer, but could not set the background picture, the libraries did not display correctly even if the files were there when I looked at the file of the user on the drive actually.

  It is a very confusing problem.

  RobertWeiner,

  You cannot run SFC without being Administrator utility. for which please select the control mode (go to the windows folder, search cmd.exe. you will find several results. In those, select the file showing in the folder System32 cmd. Click with the right button on the cmd file, and then select the option «run as asministrator» Then, type sfc/scannow in the cmd window. I think that now the System File Checker will work.

  don't forget, even you are in your admin account, you must click with the right button on the cmd file, then select the option «run as asministrator»

• User accounts / PCLECHAL settings / Admin account

  Hello:

  Try to restore the files corrupt Admin account - for newcomers. After showing all the files (via view off Tools folder), Miss me the Setup config file. If you need help on how to restore it? A previous issue where a registry / file cleaner. At removing low folder in the Temp files. Who crashed RSS and print preview. A Fixit MS re-created the folder and the value of the integrity of the files.

  If you need assistance you try to reset the folder PCLECHAL and recover these files.       Thank you

  Hi

  You asked to Pinnacle studio installed on the computer?

  PCLECHAL is a file that is likely to be associated with Pinnacle Studio. If you have some application of Pinnacle studio on the computer and always facing the question, so I would ask you to reinstall the software.

  This file can also be infected with the virus, then you can start the Microsoft Safety Scanner and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  Hi kuentin,.

  Welcome to the Microsoft Answers site!

  (1) - what do you mean you have only 1 user account?

  When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

  There is no way that you can create an administrator account, or by using a Standard account.

  (2) are you having issues during installation of the software or opening it?

  (3) what exactly happens when you try to open the software application?

  (4) should be codes error or error messages, if any?

  (5) what software are you trying to install or open?

  I suggest you go to the link below and read for more information on user accounts.

  http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

  Get back to us with more information and try out us and help you better with the same.

  Concerning
  Varun j: Microsoft Support
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not view videos in the user's account, but can in Admin account

  I use Windows 7 SP1 on two PCs. One is Windows 7 Professional and the other is Windows 7 Home Premium. This problem is on both machines.

  Browser is IE11

  Flash Player is 16.0.0.305

  I can't see some videos to my user account, but can in my admin account.

  Here is a link that I can't view - what is Photoshop? Tutorials Photoshop Adobe CC.

  When I click on the play button it comes up with a black screen. No error message, no messages of any kind.

  Thank you

  Bob

  Here is how I solved this problem:

  It worked on the 18/02/2015.

  Uninstall Flash by following all instructions at https://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  Reinstall latest flash.

  Followed all the instructions to https://forums.adobe.com/thread/987370?tstart=0

  Flash version 16.0.0.305