Admin logs

Similar Questions

• Installation of program but keep getting into user admin log to load the message of the program!

  I am trying to install a program called Simple centre for streaming of files on my PS3 so I can watch what I have on my laptop on my tv problem, it is that when I start to install the program it tells me to log-in as an administrator. The profile I'm using is the only admin on my laptop profile.

  Y at - there anyone out there that can help me with this please...

  NarcolipticM

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Admin Log in problems, far from redirects auto...

  Hello

  I am faced with a new site on Business Catalyst. I already runs a little through the system, but this one has problems. I warn you, I find the system very confusing and not so well designed commercial catalyst admin... I think I might have mucked DNS settings this time at launch.

  Memory I clicked on external DNS, (I know now that's not how my other sites are actually) but I can not connect to see...

  I've changed server names and the values of A DNS to point to the correct IP address, but now every time I try and log in to the administration panel of Business Catalyst, I redirect to the site instead, which is a page of portfolio for the domain provider...

  Help, please

  Ed

  Hi Ed,

  You set up one or the other, not the servers of names and records. A change in file is if you want Web traffic to point only to a site like BC. Name servers are for all traffic - it would be if you were using BC for emails etc.

  It would take effect however not admin redirecting to the Web site unless you are not loging in correctly or you implement a redirection of domain under this URL.

  What happens when you go to... http://YOURSITEPREFIXHERE.businesscatalyst.com/admin ? (If you have your own domain partner instead of businesscatalyst use)

• The OUD admin log

  Hello

  What is the content of the journal admin OUD...

  It contains information of activities?

  as if I create an account that stores documents in it... If Yes... there IP, username... what else will be there?

  Same newspaper (probably the one shot) will show you. Search the change operation that locked your username and then watch the corresponding binding operation to see who did it. The value of conn is the link between operations. If they have it done under cn = Directory Manager rather than on their own, the way you can trace it is if they did directly from their machine. IE the address "connect to", but it's not very likely, because they probably used DOHAD so the address would be the DOHAD machine.

• Compaq Presario CQ57: Need Admin password... Help!

  I can't hold back my admin log on password. I tried too many times and received a code 63180520 "system disabled". Can someone help me please. How can I get around this? I tried all day.

  Hello

  Please try:

  72888506

  Kind regards.

• user account - main 'administrator' acct has disappeared and I can't access my documents 'admin '.

  main account under XP pro since always 'administrator' put in place a new Admin account in Control Panel with the intention of transferring files in it, because I could not rename the original

  no other action - now since a restarted a few days later the Admin log you / account has disappeared and when I try to access the documents 'administrators' to the new user account with administrator privileges I get a message 'not available' - I NEED these files because they contain files of accounting for our local charity and supported last a disk separate until 3 weeks ago GULP!

  Hi Michaelthetruck,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article and check.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

   

  Method 2: You can also take the owner of the file/folder, to steps, consult the following article:

   

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Let us know if that helps.

• Why can I not see my admin account?

  I tried to set up a password to protect a folder in my documents.  It seemed to work until after turning off the computer and restrating it later I could not see the admin log and my user accounts do not have the data of this file or music or other files in the admin account.  If I start the computer in safe mode I can log on to the admin account, but it does not appear when I start the computer in normal mode.  I have no password or recovery discs and am running XP pro.  How to do the admin sign in option available in normal mode?

  • Click Start, run and type Regedit.exe
  • Navigate to the following key:

  HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows NT------CurrentVersion------Winlogon------SpecialAccounts-UserList

  • Use the file export option to back up the key just in case
  • Create a new DWORD value named administrator
  • Double click on administratorand enter 1 as its data
  • Exit the registry editor.

• After recovery, admin password information with 'points' and impossible to remove or change

  Hello.

  I ran yesterday, updates of Windows 7 but only those necessary.  I do not have one of those as an option.  After the updates completed, I turned on the computer and he was stuck in a loop cycle - from windows, then the admin password, connect you box came.  The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the login screen and 'incorrect password '.     I tried to change username, and it flashed back into the admin log.

  I did a system restore to the factory settings (after saving all data) using the recovery discs.  After recovery, the screen "Set a password for the account" comes with the box below "Type a password" completely filled with dots.  I can't delete them with the BACKSPACE or DELETE key.  If I put highlight and then try to erase it with BACKSPACE or DELETE, the cursor just moves on the right side of the password box, but it is not always remove the defective "dots" password so that I can change.

  I tried to restart with the power and then switch on again.  After selecting the country & language again, same password screen developed.

  It's stuck!  Any help would be greatly appreciated!  I have computer I have is the HP Touchsmart 310 1155 - Y.

  Thank you!

  It's curious with a recovery.  First, try to reset the password using NTPassword.  Do the boot CD that him following the signs.  If this does not resolve the problem of signon, think to install the operating system from a typical drive of Windows 7 to the same version, using the key of the COA sticker.

• Vista for admin is displayed in black and white, safe mode he color__How can I solve this?

  It's for my computer vista laptop professional 32-bit, I run, I have a NVIDIA Geforce 9600 M GT video card, which displays its colors very well in safe mode which I am right now.

  I tried to update the driver, and it shows that I have the latest updated driver for my card, which I doubt has problems because safe mode clearly shows the colors. I tried in the admin change all aspects of the display to check if, somehow, it shows color without result.

  I have not change anything until the problem happens, the last action I did before putting it in black and white, was admin log, and put the computer in mode "Eve". I tried to access low and high graphic games after the problem, and the low graphic games can be played in black and white, while the high graphic games are not. They display an error on x-ray engine which I assume is due to the lack of color on the screen.

  I also tried a system restore, but it failed because all the 3 times, he showed that nothing has changed for the restoration of the system has failed.

  I hope this is enough information to troubleshoot. (I restarted and tried to update and even downloaded program Mr. Fix It Microsoft and unsuccessfully yet.)

  PLS, help

  It wasn't her, but I managed to solve the problem but another way. Believe it or not, under the digital vibrance I just had it higher than before, but the strange thing is that I never played with this setting under my nvidia Control Panel. Another is that whenever I have a graphic problem with my theme (which is three times since I increased the digital vibrance), it turns black and white display before they change.

  I think that maybe it won't be a temporary solution, because I can not find the reason for the error of digital vibrance begin wth or as to why the screen goes black and white when my theme does not appear himself.

  But thanks to try it regardless, but this isn't the high contrast setting. Become text and th white black screen, rather mycomputer transformed into black and white way somewhat.

• Keystroke logging

  With the help of ACS and Ganymede + record keystrokes users type in when they enter the commands on a device such as a router or a switch?

  Yes, you can record some commands a user has run on the box of Cisco IOS. For this you must first configure permission to order on the IOS device as well as accounting. Here are the commands that you need.

  AAA new-model

  AAA authentication login default group local Ganymede

  AAA authorization exec default group if authenticated Ganymede

  AAA authorization commands by default 0 if authenticated group Ganymede

  AAA authorization commands default group 1 if authenticated Ganymede

  AAA authorization commands 15 Ganymede group by default authenticated if

  AAA accounting command 0 Ganymede group by default

  orders accounting AAA 1 Ganymede group by default

  AAA accounting command 15 Ganymede group by default

  RADIUS-server host x.x.x.x ket

  We also configure authorization on the ACS server control using the link below (Note: this link show the example of ACS using PIX configuration, but you can set up the same way IOS devices)

  http://www.Cisco.com/en/us/partner/products/sw/secursw/ps2086/products_configuration_guide_chapter09186a00801fd7cb.html

  Once we have configured the ACS and IOS devices, you can check the commands run by users in ACS by going to the reports & activities > Ganymede admin logs.

• using the admin account to create shortcuts in folders of other users

  Is it possible to be able to edit other users of data such as creating a shortcut for them without having to restart the computer? The same happens for messing around in Program Files, Program Files (x 86) or the Start Menu.
  I'm looking forward and a simple operation that used to take seconds XP is a bread PITA in Vista and 7 because I now need to log in as administrator, disable UAC, restart, wait, you connect again as the admin, my simple management operation, re - enable user annoyance control and then restart it again.
  What used to take 2 minutes now takes 10-15 minutes because of all what to expect as the computer to reboot and let me, connect.

  Am I missing something? A way to drag some files where I want to make a shortcut and you NOT say "Windows cannot create the shortcut you want here. Do you want to put me on the desktop instead?

  I'm supposed to be the administrator, these things really annoy me. UAC is useful to raise my usual account, but it's really annoying when it blocks the admin to do something. At least, it could give an admin logged in as the administrator the opportunity to do what he wants to do when messing around with files and folders. Even an annoying "are you sure?" would be better than being completely blocked.

  If there is a way to do it, let me know. I'm not talking about 'doing the shortcut on the desktop, then copy it where you want', I want to just open an Explorer window and be able to do what I want, as I often need to perform multiple operations and the delay being the guest for everyone is really annoying and slows me down.
  Especially when I compare it to Windows 95, 98, 98SE and XP, I've done this sort of thing with extensive experience.

  Especially when I compare it to Windows 95, 98, 98SE and XP, I've done this sort of thing with extensive experience.

  Windows9x version boosted BACK with only laughable security restrictions, it is not a good argument in support of your complaint. Your problem is caused by UAC, which was introduced in Vista. You can work around it by running Windows Explorer under elevated as follows:

  1. Start an elevated command prompt.
  2. Kill explorer.exe from this command prompt.
  3. Explorer.exe from this command prompt.

  You can now use Windows Explorer to access the folders of other users.

• When I start to Oracle Application server apps I got below error mention with the log file

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adalnctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  adalnctl.sh version 120.3

  Check executable FNDFS.

  From listening APPS_VIS process.

  adalnctl.sh: exit with status 0

  adalnctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adalnctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adapcctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120.7.12010000.2 adapcctl.sh

  From OPMN managed instance Oracle HTTP Server (OHS)...

  adapcctl.sh: exit with status 0

  adapcctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adapcctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adoacorectl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  ERROR: Timed out (100000): Exception interrupted

  You are running version 120.13 adoacorectl.sh

  From OPMN managed OC4J instance OACORE...

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adformsctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120,16 adformsctl.sh

  From successful OPMN FORMS OC4J instance...

  adformsctl.sh: exit with status 0

  adformsctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adformsctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adoafmctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120,8 adoafmctl.sh

  From OPMN managed Association OC4J instance...

  adoafmctl.sh: exit with status 0

  adoafmctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adoafmctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adcmctl.sh start

  Timeout specified in the context file: 1000 second (s)

  script gave:

  ****************************************************

  You are running version 120.17.12010000.3 adcmctl.sh

  Starting at the same time responsible for LIVE...

  Departure VIS_1202@VIS internal competitor Manager

  Default printer is noprint

  adcmctl.sh: exit with status 0

  adcmctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adcmctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/jtffmctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120.3 jtffmctl.sh

  Validate the patch level of achievement by/u01/appstier/SCREWS/apps/apps_st/comn/java/classes

  Valid fix Fulfillment level.

  From realization for SCREWS on port 9300 server...

  jtffmctl.sh: exit with status 0

  .end std out.

  .end err out.

  ****************************************************

  [Service Control implementation report]

  The format of the report is:

  < group Service > < Service > < Script > < status >

  Root active Service

  Root Service Oracle Process Manager for VIS_prod adopmnctl.sh Started

  Entry Point active Web services

  Entry point Web Services Oracle HTTP Server VIS_prod adapcctl.sh Started

  Web Entry Point Services OracleTNSListenerAPPS_VIS_prod adalnctl.sh Started

  Application Web enabled services

  Web Application Services OACORE OC4J Instance VIS_prod adoacorectl.sh Failed

  Web Services FORMS OC4J Instance VIS_prod adformsctl.sh Started

  Web Application Services Association OC4J Instance VIS_prod adoafmctl.sh Started

  Services enabled processing batch

  Batch Processing Services OracleConcMgrVIS_prod adcmctl.sh Started

  Batch Processing Services Oracle Fulfillment Server VIS_prod jtffmctl.sh Started

  Other disabled Services

  Other Services OracleFormsServer - forms VIS_prod adformsrvctl.sh disabled

  Other Oracle Metrics customer VIS_prod adfmcctl.sh people with disabilities Services

  Other Oracle Metrics Server VIS_prod adfmsctl.sh people with disabilities Services

  Other Oracle MWA Service VIS_prod mwactlwrpr.sh people with disabilities Services

  ServiceControl dating status 1

  ============END OF LOG FILE=======================================

  Here are the results of some queries:

  The query result

  Select the status from v$ instance;

  STATUS

  OPEN

  Select INSTANCE_NAME from v$ instance;

  INSTANCE_NAME

  SCREW

  If you have changed the IP address, then you must purge FND_NODES, then run AutoConfig on the node of the database layer and the application layer node to populate the table. Once the correct entries exist in the FND_NODES table, and then you can start services and check - assuming that the IP address was successfully changed at the level of the BONE.

  Thank you

  Hussein

• Issue of log file.

  Hi all
  
  I'm running on ebsr12 12.1.1 db 11.1.0.7 on OUL5x64
  
  I have 2 questions would like your help.
  
  When to apply a patch got this error and when using adadmin to re - generate the form always had this error
  
  The following Oracle Forms objects have not generated successfully:
  
  forms of GL/Reconnoitred GLXJEENT.fmx
  
  where is the location of the log file that I can see more detail about the error.
  I was in $APPL_TOP/admin/TEST/log and $APPL_TOP/admin/TEST/out
  but he had no further details on the error.
  
  
  
  found this note from Hussein
  Please make sure that you have no invalid items in the database before trying to generate the form again through adadmin or manually.
  If forms fails to compile, check the log file of errors for more details - how to generate forms, library and Menu for the Oracle Applications [130686.1 ID]
  
  for re - generate exe form of command line.
  
  frmcmp_batch.sh module=/TEST/testappl/au/12.0/forms/US/ARXTWMAI.fmb
  UserID = APPS/APPS output_file=/TEST/testappl/ar/12.0/forms/US/ARXTWMAI.fmx
  module_type = form compile_all = special
  
  This form is for the USA, if I want to generate the Reconnoitred shape, should I just change the point of the situation of the Reconnoitred like this
  frmcmp_batch.sh module=/TEST/testappl/au/12.0/forms/ZHS/ARXTWMAI.fmb
  UserID = APPS/APPS output_file=/TEST/testappl/ar/12.0/forms/ZHS/ARXTWMAI.fmx
  module_type = form compile_all = special
  
  Thanks for your help.
  Concerning

  The following Oracle Forms objects were not successfully generated: gl forms/Reconnoitred GLXJEENT.fmx

  The adpatch log will tell you worker who dealt with the CGF...... Mark this number of worker in the same directory search ad * worker_num * .log and see that the log file.

  You can find adworker, adpatch adworker log: -.
  Application layer - journal adpatch - $APPL_TOP/admin //log/

  Thank you
  JD

• Cannot install Adobe AIR - need the Admin permission.

  I can't install Adobe AIR on my Windows XP as it the error message says that I need to contact the administrator.

  RE:

  "An error occurred during the installation of Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator. »

  I am the owner of my PC, so the amin should be myself but do not know how to do this.

  I tried the right click on the Adobe icon on my desktop to access the admin log in, but I am unable to do so because he does not accept the passwords that I entered.

  I need to bypass the admin or find a way to access my admin. I think I read somewhere that Adobe may have an apllication for this but would not find.

  Someone has an idea how this app works on my PC?

  I'm sorry that you run into problems installing with AIR.  Microsoft has just released a new utility that can help to resolve installation problems.  Would you mind giving it a try and let us know how it works for you?  When you run the patch, go through the uninstall process and trying to remove Adobe AIR on your system.  Once finished, download the latest version of AIR and install again.

  Microsoft install and uninstall the fix it

  If you're still having problems, you need to view the AIR installer log to better diagnose the problem.  Please post back with the content of the newspaper.  You can find instructions to find these papers here:

  Installer AIR journal Instructions

• 11g listener log location

  Database has been improved from 9.2. 11g and 11 g new listener.ora files have these 2 entries:
  
  LOG_DIRECTORY_csct = $ORACLE_HOME/network/admin/log
  TRACE_DIRECTORY_csct = $ORACLE_HOME/network/admin/trace
  
  However, it seems that listener logs written in these 2 directories
  
  $ORACLE_BASE/diag/tnslsnr/servername/DB_NAME/path
  $ORACLE_BASE/diag/tnslsnr/servername/DB_NAME/alert
  
  Why this is happening and how I can change back.
  
  Thank you.

  You change comes back with:

  1. in listener.ora

  DIAG_ADR_ENABLED_=off
  LOG_DIRECTORY_=
  

  2. stop and restart the receiver.