The OUD admin log

Similar Questions

• Installation of program but keep getting into user admin log to load the message of the program!

  I am trying to install a program called Simple centre for streaming of files on my PS3 so I can watch what I have on my laptop on my tv problem, it is that when I start to install the program it tells me to log-in as an administrator. The profile I'm using is the only admin on my laptop profile.

  Y at - there anyone out there that can help me with this please...

  NarcolipticM

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• CHANGE THE MAIN ADMIN ACCOUNT: WINDOWS 7

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  I put my machine using my admin account but had a problem with and an Adobe program. Adobe technology has created a second admin account, account now appears to be set as primary and I can not change the options for the account, much less delete it but I would like to make.

  Can someone tell me if there is a solution to this?

  See below:

  1. This is my main account, and he's always been. I click on 'manage another account '.

  

  2. He takes me to the screen. I click on "Administrator". Administrator. "

  

  3. no options to change the account are available. This is the account that Adobe technology created AFTER the story of 'Kevin Byers' had been used as my main admin account.

  

  The strange thing is that these options ARE available on my main account. The FIRST account created on this machine.

  PLEASE NOTE: THIS IS THE ACCOUNT I USED TO LOG IN.

  

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Hi all

  I want to change the main admin account on Windows 7, so I can remove the second account admin on my machine.

  So I guess the question is: why was the SECOND admin account changed to primary school, why can't change this back, and why I can delete the account I'm logged in from this account?

  I've been racking my brain and no one I know can help. Searches provide nothing, so if you have anything it would be appreciated.

  Your problem is mainly due to some confusion.

  There is no 'primary' admin account in Windows 7. There are '' integrated '' account called "Administrator". It's still there. You can't create, edit or delete. Adobe technology has not created the it. He simply allowed her.

  You can disable the built-in Administrator account by using the sequence of steps shown below. Before you do, you should create, test, and document an alternative admin account. Why? It's for the same reason that you have a spare key to your House. A lot of people have in diabolical trouble in case something goes wrong with their one and only the account Admin happens all the time. With spare admin account, you are safe.

  1. Log in under your own admin account.
  2. Click the start planet.
  3. Type these letters: cmd.exe
  4. Press Ctrl + Shift + Enter.
  5. Accept the challenge.
  6. Enter the following command and press ENTER:
     NET user administrator / active: No.

• How to fix the user admin corrupted in Windows 7 profile

  I have only a single user profile with administrator privileges.    I can't connect to it, I got the msg «user profile cannot be opened...» ».   I can boot into safe of all Modes.   After reading a few messages of support online, I started in safe mode and stored in the profile 'admin' and he wrote "the default profile loading" and then connect.    I then try to go to user accounts and 'Add a new user' add a new user with administrator privileges, but this option is not shown to me.  If I try to click on "manage user accounts", it does nothing.   It shows a "shield" of microsoft on the left side of this option.    I know that I can access my documents in SafeMode still, but the need to create a new user to move them.  Help!

  Thank you.

  Woohoo!   I downloaded the Microsoft Fix It program, as described in method n ° 3 in http://support.microsoft.com/kb/947215 and it ran!  He asked my password login Admin which I had removed and then click on back and he ran fast.  I then logged to my user account with success!

  I had moved my Directory/User original under a new name, then the new connection has come to the top without any of the old files, but I can move them there now with administrator privileges.
  Thanks for the link and love the option "let them fix!

• Active Directory roles are not listed in the Applets Admin-> role permissions

  Hi all

  I've set up an ActiveDirectoryProvider in Weblogic and we are able to connect COE successfully with a user of the AD.

  After logging in to the CMC, I see all the roles to come from the pub when I clicked on the username in the upper right. It is ok.

  But I'm unable to change the permissions in the Applets Admin because the same roles do not appear in the applet.

  What's not here?

  Looking for your answers. Thank you very much.

  After logging in to the CMC, I see all the roles to come from the pub when I clicked on the username in the upper right. It is ok.

  But I'm unable to change the permissions in the Applets Admin because the same roles do not appear in the applet.

  The roles that you deploy any external identity store as AD, LDAP will not be added to the admin applets by itself since there is the standard that should be set manually (or the default). These roles will be visible only to users who are assigned to them and if you are looking for to handle them then either use identification information cards (which would be the easiest option) to map external roles to the existing applet or manually create the same name roles in admin applet.

• When I try to download Win Pro 8.1 from app store I get the message to log on as an administrator.

  Hello

  I use pro.wen win8 I try to download win 8.1pro from the app store, I get the message to log on as an administrator. IAM the admin and my account is local.even after, sign in as addmin I still get the same message to connect as admin.what is the solution?

  Thank you

  Pradeep

  Original title: win8.1pro upgrade problem

  Hello

  Please, try the fix mentioned here and see if this helps you:
  http://www.kapilarya.com/fix-cant-download-Windows-8-1-from-Windows-store
  Hope this helps, good luck :)

• Exception thrown by SsoUtil: failure of the SSO admin service

  I'm diagnosing a problem in an improved environment related modes running 6.0 Update 1 (2 vCenters, same domain) where I'm getting the following exception when calling UserSessionService.getUserSession ():

  [ERROR] data-service-pool-2704 70000426 100010 200005 c.vmware.vsphere.client.usersession.impl.UserSessionServiceImpl there was a problem when retrieving the list of system fields com.vmware.vise.vim.security.sso.exception.SsoServiceException: failure of the SSO admin service

  at com.vmware.vise.vim.security.sso.SsoUtil.getAdminService(SsoUtil.java:256)

  at com.vmware.vsphere.client.usersession.impl.UserSessionServiceImpl.extractSystemDomains(UserSessionServiceImpl.java:179)

  at com.vmware.vsphere.client.usersession.impl.UserSessionServiceImpl.getUserSession(UserSessionServiceImpl.java:156)

  at sun.reflect.GeneratedMethodAccessor496.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:319)

  at org.eclipse.gemini.blueprint.service.importer.support.internal.aop.ServiceInvoker.doInvoke(ServiceInvoker.java:56)

  at org.eclipse.gemini.blueprint.service.importer.support.internal.aop.ServiceInvoker.invoke(ServiceInvoker.java:60)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.eclipse.gemini.blueprint.service.importer.support.LocalBundleContextAdvice.invoke(LocalBundleContextAdvice.java:57)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)

  to com.sun.proxy. $Proxy503.getUserSession (unknown Source)

  Someone at - it guidance on this diagnosis?  I couldn't find much information about this error in the SDK documentation.  Thank you

  -Mike

  Cool! Now what remains is to you or your client to file a SR. I already logged bugs for these fixes and bugs are scheduled for update 3, which will come in February 2017. If you want to speed up the fix and get a warm official patch, connect the SR.

  I enclose the latest patches:

  1. for version 6.0 Patch 2:

  UserSessionServiceImpl_class_60p02_build3271482.zip

  class_loading_patch_for_60p02_build3271482.zip

  2. for version 6.0 Update 2

  UserSessionServiceImpl_class_60u2_build3617395.zip

  class_loading_patch_for_60u2_build3617395.zip

• Compaq CQ58: I forgot the password admin or bios for compaq CQ58

  I forgot the password admin or bios for compaq CQ58

  my code is 94289323 please help

  @leonaedo

  Enter 21181905

• Cannot access the local admin page after first start

  Hello

  I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.

  Best regards

  Patrick Schmidt

  OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...

• See the domain admins

  Hello

  I want to know if there is anyway that I can see when an account has become a member of the domain admins group? on windows server 2012 r2

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I forgot my login password and im the only Admin so I need help I can't even run java updates

  OK here is the deal I have forgoton the password windows and im the only admin on the pc then now that I open a session through my children connect but can't do a thing with regard to updates or installation of programs help etc.

  Most of the PC and mobile PC technicians repair shops have the ability to crack the password. A contact on site and inquire.

  If happen them to have access to the tool of locksmith in the MSDaRT it will take just ressemelable your question. If they have never heard talk about MSDaRT or Microsoft LockSmith utility, then find another store or mobile PC technician.

• When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  I have two users put in place. When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  Hello GEOFFMUGGLETON,

  This thread has been created in the discussion forum. and performance of Windows Vista Microsoft moderation team has moved this thread to the security, privacy and user accounts Forum.

• my cd rom will not completely close and when I close it restarts the computer in safe mode. in the technet event log it says the following: IO_ERR_BAD_BLOCK

  The cdrom will not close completely and it won't open when I push the Open button.  When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode  In the same newspaper, it has the following:

  Log name: System
  Source: cdrom
  Date: 20/03/2011-16:18:10
  Event ID: 7
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Jeff-PC
  Description:
  The device, \Device\CdRom0, has a bad block.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7
      2
      0
      0 x 80000000000000
     
      169760
      System
      Jeff-PC
     
   
   
      \Device\CdRom0
      0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
   
  

  I'd appreciate any help you could provide.  Thanks in advance.

  Hello

  Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.

  To uninstall the drive from Device Manager:
  a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
  b. right-click on the CD and click on uninstall.
  c. restart the computer.