admin password, disable the system with a key: 81444456

Similar Questions

• I know that my Admin password but the system will not accept

  Today, I changed my Standard user password and now the system does not recognize my existing Admin password.  I did not define another Admin account.  What can I do to fix this?

  I did not define another Admin account.  What can I do to fix this?

  A fully tested alternative admin account is just like a spare House key. Those who did not catch sooner or later...

  1. Ask a friend to burn a CD repair system for you.
  2. Use this CD to start the machine in Repair Mode.
  3. Use system restore to restore Windows to a point before play you with your accounts.

• CQ60 COMPAQ PRESCARIO: Please, I forgot my bios password, disabling the system number is 63801423

  System password

  @chris127

  Enter 72769405

  Kind regards

  DP - K

• Go dv6700: disable the system password bypass

  Disabling the system error 15603. Ask for a password after three attempts, an error message is displayed. How should I do? Thank you!

  @Starsshaallen80

  Enter toul

  or

  oanhiqq

  Kind regards

  DP - K

• Partition problem after the recovery of the system with a single key 6.0

  I need your help!

  My Lenova Ideapad Y430 not more start and I had to restore the system with the recovery CD I burned with a recovery key 6.0. The restore process showed no defects and no error has occurred.

  Now, after restaring the system I only 0 with a C: partition (all program files, vista, drivers etc.) 104 GB and the 'part of recovery for a key' 14.75 working. D: partition where all my documents, pictures etc. are stored are listed, but idle and not accessible nor editable with the tool Vista Diskmanagement.

  No idea what I can do?

  You can download EASEUS partition manager. It will help you to reformat the D drive.

• Remove admin password in the BIOS in Portege R500

  I am trying to disable the admin password in the BIOS of my laptop series r500, * and I know * current password.

  I tried the procedure from the following post, who works to disable the user password. It basically involves change the empty password.
  But it does not work for the admin password:

  [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=141587𢤓 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=141587𢤓]

  I initially allowed because I wanted to see if there is 'hidden' in my BIOS options (long story... tried to get virtualization extensions to work).
  Now I have to type it every time I turn on my laptop, which is quite annoying.

  Someone has any suggestions, how to get around this problem?

  Thanks in advance.

  Hello

  You mean the admin account password, which must be defined during the installation of the OS?
  This password cannot be disabled in the BIOS!

  But if you talk to supervisor password then I would recommend checking the utility called preinstalled Toshiba password tool.
  You should find it in the utility folder Toshiba.

  The password of Toshiba utility allows you to set, delete, and change the password user and supervisor.

  Check it!

• Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery

  I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?

  I'm not about to spend all that money on a battery just to know that it is not the battery.

  Hello

  If you have the 64 bit rescue CD, you would have received an error if it was bad.

  Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Enable and disable the NIC with the Standard users

  Hi guys.

  We set up a phone book ad within our Organization. Additional client systems (Windows 7 and Windows 8) to the field. Domain users are accessing the system with the permission of standard users. I don't want to give administrator permissions. But the user should be able to disable and enable the network adapter without giving administrator permissions. Please suggest.

  Thanks in advance for the help.

  It is not possible.  Only an administrator is allowed to modify the configuration of systemic, such as activation or deactivation of the hardware components of the system.

• Is it possible to disable the caps lock shift key on a laptop?

  Is it possible to disable the caps lock shift key on a laptop?  I am running Windows 7 64 bit on a Lenovo laptop
  Thank you

  I understand that you have found some suggestions on editing the registry - they aren't so bad. If you don't want to download all of the files that allow you to disable the LOCKING of the capital LETTERS, you can create it by yourself:

  1. Press the Windows key + R > type notepad , and then press enter
  2. Paste to Notepad:
     

     Windows Registry Editor Version 5.00

     [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
     "Scancode Map" = hex: 00, 00, 00, 00, 00, 00, 00, 00, 02, 00, 00, 00, 00, 00, 3A, 00, 00, 00, 00, 00

  3. File > record under...
     • Select to Save as: all files
     • Enter the file name : disable_caps_lock.reg
     • Click Save
  4. Right-click on the created file > merge
  5. Restart your system

  In case you want to turn CAPS LOCK on again, you must remove this registry entry, so you must do the following:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout
  3. Right click on the Card of Scancode > delete
  4. Restart your system

  I guess that it is perhaps the only way to turn off the CAPS LOCK.

  In case you still don't want to do this, Windows 7 offers something different to disable the LOCKING of the upper CASE. You can turn the ToggleKeys, then you will hear a beep when you press CAPS LOCK. To do this follow these steps:

  1. Press Start > Control Panel > access >easy access Center > make the keyboard easier to use
  2. Check the box to enable the ToggleKeys

• Anyone know how I can disable the block with the wikipedia etc. that appears in the place of the cursor if you hover over the texts? This is a most annoying invention! Help, please! Thank you!

  Anyone know how I can disable the block with the wikipedia, google, etc., which opens at the location of the cursor if you hover over the texts? This is a feature of most annoying that one should be able to disable if not needed. I use windows xp family and have the latest desktop version of FF, but I don't think that they are the problem. Thank you very much.

  This isn't a core feature of Firefox (AFAIK) - looks like an extension you have installed is that fact.

  Please send the contents of the extensions section of about: support

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  in the case give me the link of a hard disk of type to add

  Hello

  While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

  Kind regards

  DP - K

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  "For reasons of security, this program will not work while system debuggers are active. Please remove or disable the system debugger before attempting to run this program again. »

  This message appears whenever I try to open Video Edit Magic, I already turned off Norton.
  Try to adjust the compatibility setting and run...

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  http://Windows.Microsoft.com/en-us/Windows-8/get-apps-devices-working

• Compaq Pressario CQ56: Admin password not known - system disabled

  I tried to get into the bios, but do not know the Admin password.  I'm getting the erroe SYSTEM DISABLED - key: 55433066.  Any ideas what I should do next, thanks, Dave

  Try this 40591068