Administration of access control

Similar Questions

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• Group administrator cannot open Control Panel, Manager of tasks or access networked readers

  Hello

  I have a little trouble getting one of our computers in the domain to cooperate.  We've added a bunch of user profiles of domain on this computer, all under the administrator group, but nobody except the local administrator can access network drives, open Control Panel and open the Task Manager.  Even our domain administrator cannot do the previously listed.  We have 3 other computers that use all the same members, and they are all very well, so I don't think that the question lies in group policy.  It's almost as if the local administrator group settings have been changed somehow?  I went into the local group policy and all settings seem correct.  I'm puzzled little at this stage.  This could be the cause of this problem?  What is a corrupt local administrator account?  For any help or suggestion would be greatly appreciated!
  Thank you!

  Hi Jay,.

  Thanks for posting your query in Microsoft Community.

  The question you have posted is linked to the domain. It's going to be better suited than it pro. I suggest you post in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps!

• my taskbar disappears and I can't close properly. Cannot access control panel

  Hi please can help you.

  If I leave the computer for a while, the screen freezes.

  I can't stop the computer correctly in the start menu, but have to do it from the Tower

  by pressing the button until the orange indicator light appears. Instead of going to start, log off etc.

  I can't access control panel either, but everything else seems to work very well.

  Also, the taskbar disappears.

  Help, please.   best regards and thank you joan

  Hi joanmorgan

  
  Method 1:

  You can check if you have found errors in the case where the Viewer, and if you find one, let us know the details. Check out the link for more details below:
  http://support.Microsoft.com/kb/308427

  Method 2:
  You can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• message from Windows 7 system is unable to open the access control editor. invalid syntax

  Hi, I recently bought this pc, asus n551jk, which came with windows 8.1, I switched to 10 windows because windows 8.1 give problems, so I had problems with windows 10 crashing on some games, so I decided to go back to windows 8.1 and all of a sudden I couldn't. don't know how windows.old has been deleted, but it wasn't the case to be found, and no, it wasn't a month yet since I went. After many crashes and intentions powerless to find a solution, I decided to go to windows 7. I installed windows 7 and had a multiboot windows option 10 and windows 7 successfully, but it was weird cos I just installed windows 7 on the c: drive, but now I had folders windows.old and windows.old000 on the c: drive and had also, folder windows on drives C and D, don't delete anything simply decided to restore my previous backup files, the files do not have restore to the usual places and it was all mess really, I had several repeated files, up to this point, everything worked perfect, so I decided to install updates and restart windows, after restarting, I realized I didn't have a multiboot option more, windows 10 had completely disappeared and had Windows 7 , and when I connected, I decided to get rid of some repeated files to free up space, and I noticed that I could not remove anything, when I clicked on delete, nothing happened, even no error message, nothing, nothing at all, I tried with several files and it remained the same. I looked for solutions on the net, tried to give me the privilege administrator cos it seemed to be the problem, then I noticed that I had 2 users, one of them which was 10 windows user and current user of windows 7, and the funny thing is that with the privilege of administrator is the user windows 10. but I can't access windows 10 more, then why? How is that possible? I have still two files windows.old, why have I lost access to the windows 10? It didn't remove boot options. then I went to windows.old000 and rendering account this is the folder that I had the privilege of administrator to the course, I could remove/change anything in this file outside of this folder, I couldn't do anything else, I could access the older records, but I could not change or do something with them and once again windows.old000 is on the c: drive, on which I have windows 7 installed. And why have I lost access to the windows 10 if I never deleted it, not even by mistake. and I've tried the command cmd / active: Yes NET LOG ADMIN and that I received was that USER cannot NOT BE FOUND. so I would be grateful if anyone can help cos im frustrated, I don't want to go back to windows 8.1, I have the drive, but its got a lot of questions. Thanks in advance-

  Hello

  Welcome to the Microsoft community.

  Since the beginning of the question and not tried troubleshooting, there seems to be a lot of mixing upwards and there might be conflicts on Windows files for each installation. The best option recommended for everything what you back up data and start with the new facility.

  However, you can refer to the suggestions posted by Shishira D and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cant-open-access-control-editor-access-is-denied/0b938de0-620C-417f-a2b6-50a9c7f58766?DB=5

  The steps include also the right command to activate by default. You can enable the default Administrator and check if you are able to access your data in the default administrator user account.

  Hope this information helps.

• WARNING 1336: The structure of access control list (ACL) is not valid

  Security permissions are stripped on Win 7 32 bit.  Trying to restore default

  Followed the instructions to reset default command-line following running as administrator - results to the newspaper below

  secedit / configure / db /cfg %windir%\inf\defltbase.inf defltbase.sdb / verbose

  How can I fix the structure of the access control list?

  Log file:

  December-14-10 09:38:47
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-18.
  Remove SeShutdownPrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1004.
  Remove SeNetworkLogonRight.
  Remove SeBatchLogonRight.
  Remove SeServiceLogonRight.
  Remove SeDenyInteractiveLogonRight.
  delete SeDenyRemoteInteractiveLogonRight.
  Remove SeImpersonatePrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1005.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1006.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1008.
  delete SeDenyBatchLogonRight.
  Remove SeDenyInteractiveLogonRight.
  Configure the S-1-5-32.
  Remove SeServiceLogonRight.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Remove SeServiceLogonRight.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-4262353681-2820704222-1343016971-501.
  Add SeDenyNetworkLogonRight.
  Configure S-1-5-32-555.
  Configure S-1-5-80-0.
  Configure S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.
  remove the Bob-PC\ASPNET.

  Group membership configuration was completed successfully.

  -Configure registry keys...
  Configure users\.default.
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  Hello

  See if the continuation of the measures on this blog help repair the ACL: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• KB3035583 failed - cannot access control panel or turn off PC

  Because today, I'm not able to access control panel or turn off my PC Windows8.

  I checked the software updates, and I see that the KB3035583 update failed last night. If windows 10 update I don't want installed nor am I eligible for it. However, this update failed meant now I can not access PC settings, control panel or turn off my PC. Also I am not able to run any command as an administrator because it tells me that I don't have that even if I am sure that this feature is enabled, and it's my PC denied access. I also tried restore but even that does not work.

  Advice please?

  Hello

  See if this helps you:

  "How Fix and PC Restore settings and"PC settings"in Windows 8.1"

  http://www.eightforums.com/tutorials/42001-PC-settings-fix-restore-Windows-8-1-a.html

  Information

  This tutorial will show you how to restore the PC settings on applications screen and set the 'Change PC settings' link in the charm of settings (+ I) in Windows 8.1 and Windows RT 8.1.

  You must be logged in as an administrator to be able to do the steps in this tutorial.

  _____________________________________________

  If this isn't the case, follow these steps.

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• fine-grained access control

  Hello

  I use under version

  Connected to Oracle Database 11g Express Edition Release 11.2.0.2.0

  I'm learning the fine access control

  SQL > connect / as sysdba

  connected.

  SQL > grant execute on dbms_rls to george;

  
  

  Grant succeeded

  _______________________________________

  Related: GEORGE

  I created under function

  SQL > CREATE OR REPLACE FUNCTION SECURITY_FN1)

  2 P_OBJ_SCHEMA IN VARCHAR2,

  3 P_OBJ_NAME IN VARCHAR2)

  4

  5 RETURN VARCHAR2

  6 EAST

  7. START

  8 IF USE = "PLSQL1" THEN

  RETURN ID < 4' 9 ';

  10. OTHER

  11 BACK ";

  12 END IF;

  13 END;

  14.

  While I try to run the pl/sql block, he's throwing error.

  BEGIN

  DBMS_RLS. () ADD_POLICY

  OBJECT_SCHEMA = > "GEORGE."

  Object_name = > "SPROCKETS."

  POLICY_NAME = > "POLICY1."

  FUNCTION_SCHEMA = > "GEORGE."

  POLICY_FUNCTION = > 'SECURITY_FN1 ',.

  STATEMENT_TYPES = > "SELECT."

  UPDATE_CHECK = > FALSE);

  END;

  ORA-00439: feature not enabled: fine-grained access control

  ORA-06512: at "SYS." DBMS_RLS", line 20

  ORA-06512: at line 3 level

  What causes the error, I gave george grant option option.

  Please help me

  Thank you

  Hello

  I think that you don't have this option available in this doc (VPD)

  See

  Options and features not included

  http://docs.Oracle.com/CD/E17781_01/license.112/e18068/TOC.htm#XELIC117

  also here http://docs.oracle.com/cd/E11882_01/appdev.112/e40758/d_rls.htm#ARPLS052 you can see that it is the only luxury of EE edition.

  The DBMS_RLS package contains the administrative interface of access control to end grain, which is used to implement the private virtual database (DPV). DBMS_RLS is only available with the Enterprise edition.

• Access control with custom groups

  I'm rather new to APEX. I'm trying to implement access control/authorization using custom groups (not built-in groups View, Edit and administrator). I search the web and the forums of discussion, in general, but so far I came up empty. I was hoping someone could point me in the right direction on how to start. Is there stored procedures that need to be adapted and implemented? Where should I keep the user groups? Can I use tables integrated or we can develop custom security group tables? These are some of the questions that I tried to be and any help would be appreciated.
  
  And BTW, due to the customer's requirements, we currently use version 3.2. Not sure if there are significant changes between this version and the latest version.
  
  Thanks to you all!
  Mischa

  Custom authentication is easy enough to put up with your own tables, here's an example
  http://djmein.blogspot.com.au/2007/07/custom-authentication-authorisation.html

  This brings to authorization, using your own tables. It must focus on the use of the authorisation schemes
  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35125/sec_authorization.htm#BABEDFGB
  This can simply be queries on the tables of your own group, which probably would control membership by username.

  You ask a question about the use of built-in tables, but do not want the built-in administrator groups?

  Many important changes, but none that should affect you in what concerns the authentication/authorization.

  Scott

• Report of HSS access control

  Gurus,
  Access control in HSS report gives a good report in PDF format. Is there a way we can have the report generated in XLS format. Export in XLS or something like that?
  I was not able to find it again. Any guidance / suggestion would be great.
  
  also.
  
  When I do a LCM of SHARED SERVICES under FOUNDATION, in the export for supply, the ROLE_ID looks like:
  Native://DN=CN=hub:2, OU is HUB, OU = roles, dc = css, dc = hyperion, dc = com? ROLE
  Native://DN=CN=HAVA:0ad72262 - 0000-0f5a-000000ea5598b293, HAVA OU =, OU = roles, dc = dc = hyperion, dc = com, css? ROLE
  
  How do know us what role a user is provisioned while watching something like that? HAVA is to R and A, and HUB for shared services, but what kind of role?
  
  Thank you

  You can create a report of implementation of the HSS.

  Administration-> commissioning report view

  You can then select the Application. This provides an option to export to the csv file.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• Win Media Player: Video goes full screen and cannot access controls

  All videos play automatically goes to full screen and I can't access controls by the keyboard or mouse. Sometimes crashes mode full screen.

  I tried setting the options of WMPlayer nothing helps.

  Any suggestions?

  Hello

  When the video begins to make double click in the middle of full screen and it should bring back the standard window. You can also try using the ALT + F4 key combination.

• simulate the track access control with labview

  Hello

  I want to simulate a track with labview access control.

  This is the procedure:

  vehicle is located in front of a door, antenna check access control, if that's ok the traffic light turns green and the gate of the student.

  I thank very you much for helping me.

  Hi hot wheels,.

  I think it will be useful for you

• rundll32exe error when tryng to access control panel

  How and where can I find a free solution for rundll\32\exe error message while tryng to access control panel

  Hello

  (1) what is the operating system that you use on the computer?
  (2) have you made changes on the computer?
  (3) what is the accurate and complete error message you get?
  Follow these methods.
  Method 1: Follow the steps in the article.
  Note: You will need a Windows XP CD to perform this operation.
   
  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  Method 2: Run the analysis of file system (CFS) auditor to repair corrupted files.

  http://support.Microsoft.com/kb/310747

  Note: You will need a Windows XP CD to perform this operation.
  I hope this helps!