Nighthawk 7000 activate https / ssl connection to the internal administration
Dear community,
I want to change the administration page to browser http to https (port 443). The only thing I found is the ability to open https for external administration.
I want to stop sending the admin to the router plaintext password in my home network. Is it possible to configure https for administration?
If there is no safe way for the router configuration using wlan how to configure you there safely (with the direct help of cable attached to the router)?
Best regards
Mark
As far as I KNOW, there is no way to activate https for internal administration. The assumption is that you have a reasonable control over devices in your network.
The way only I can think of to manage your router must turn off the radio by using the physical button on the Wi - Fi connection and disconnect all devices wired the R7000 except for a wired computer.
Tags: Netgear
Similar Questions
-
Hello
I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...
Please give the solution
What happens when you try to connect?
If you are able to connect using the different account, try running gpupdate/force.
If the problem persists, you can open the discussion on:
http://social.technet.Microsoft.com/forums/Windows/en-us/home
What is responsible technical issues forum.
-
Change the SSL connection on the Server VMware - what customers?
Hello
I currently have Mirage Horizon 4.2.3 installed and I use NO SSL. Server is available only for users within the local network.
I would change it and this server on the internet for the users will be able to backup data during a move and I'll be able to get diapers for them.
All guests of Mirage are pointing to the internal address of Mirage.
My questions are:
-If I change server settings will be I lost the connection to the LAN clients or I'll go 'extra' access via https?
-is it possible to make clients to use SSL connection without re-installing the agent of Mirage?
-I can do it without full re-synchronization of data?
[Thanks for the replies and suggestions:]
Once you have changed the configuration of SSL for a server of Mirage, customers also has need to use SSL for connects to the server, otherwise the connection will not be established.
You can change the settings of the Mirage customer without reinstallation:
-In Windows, the tray icon, open the status of Mirage, CTRL + ALT + S, a new window to set up the client must open and then check the Option 'use SSL Transport'
OR
-Edit the Wanova.Desktop.service.exe.config file and change the 'useSslTransport' for real 'touch' and then restart the service Wanova Mirage
Full re-synchronization of data should not be necessary, as endpoint and always the same agent
-
Problem with Windows Fax and Scan does not connect to the Internal Modem
Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.
If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.
While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.
If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.
I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.
Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.
Sorry about that.
Here is the link:
-
Unable to connect to the server administration Serengeti
I am building a test for BDE configuration, and now I'm stuck with a problem.
Problem: Unable to connect to the administration server Serengeti using BDE plugin in the Web Client. After you select the management server in Serengeti, when I click on OK, I get an error message "Connection Failed!". Screenshot of the error is attached.
Things I've tried so far:
1. I tried using IE, Firefox, but I get the same error.
2 uninstall the plugin BDE, re-installed, but still the same problem
3. DNS resolution works quite well.
4. I am able to ping to/from all possible directions
5. the VAPP has been deployed with the resources box initialize verified. In addition, SSO registration was made
6. have you deployed nine VAPP a few times, but still the same problem.
7. when VAPP is deployed without SSO registration, I can connect using Serengeti CLI, but of the Web Client, I always get the same question. Strangely, SSO 19.ne recording enabled, I can't to Serengeti CLI as well.
8. as in the other posts, ran < EnableSSOAuth > command and restart the Tomcat service. Always the same question.
9. have you restarted SSO, VC, paralytic, but not luck.
Excerpt from the server logs Serengeti is below:
[root@bigdata ~] # tail-f /opt/serengeti/logs/serengeti.log
at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:588)
to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:489)
at java.lang.Thread.run(Thread.java:636)
2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: ask the message has expired. Server message: ns0:MessageExpired: request timed out
2013 05 August at 21:01:11, 245 + 0000 INFO http-8080-3 | com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.
2013 05 August at 21:01:11, 245 + 0000 ERROR http-8080-3 | com.vmware.bdd.security.sso.utils.SecurityUtils: could not validate the token by sso: server returned "expired query" less than 0 seconds after application has been published, but it should not be expired at least 600 seconds.[root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log
[root@bigdata ~] # tail-f /opt/serengeti/logs/vhm.log
21:22:19.878 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp
21:22:19.878 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...
21:22:24.988 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp
21:22:24.988 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...
21:22:30.98 05 August 2013 [ClusterSCL_Poll_Thread-VcVlsi] No. found clusters for hadoop UUID SERENGETI-VAPP-BDEvApp
21:22:30.99 August 05, 2013 [ClusterSCL_Poll_Thread-ChangeListener] temporarily lost the connection to the CR...
Has anyone seen this problem?
Kind regards
Nitin Gupta
I saw the log says "com.vmware.vim.sso.client.impl.SecurityTokenServiceImpl$ RequestResponseProcessor: server returned 'query' expired less than 0 seconds after application has been published, but it should not be expired for 600 seconds at least." for these connection request. " According to Ko to http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2038086
You may need to update the vc server local time. Please have a try on this KB and see if it works.
Thank you
Jun
-
Mac Mini loses the connection to the internal hard drive
Hello
I got in trouble once per day or almost one year that my Mini mac interrupts the communication with the hard drive. You can work away and all of a sudden all gel applications. Say, you happen to have a terminal open, if you try to execute commands in / sbin as stop or something like that, it is to say that you don't have access to the files with an error like this:
bash: / sbin/shutdown: device not configured
Finally the Terminal Server session freezes as well.
I used the Apple Diagnostics for all the materials and it test verifies all very well. I bought and installed a copy of TechTools Pro (v8.0.3 build 1967) and he reported no problem whatsoever with everything. To be on the safe side, I replaced the memory, still no luck.
I've lived a lot of system updates and none of them seem to have solved the problem. I am currently on OS X El Capitan v10.11.5 Beta (15F18c). Yes I know it's beta, but this problem before any release of El Capitan.
The most reliable way to reduce the appearance of it during my work day is a reboot planned each night. For one reason or another, which reduces the frequency.
I am at a loss on how to fix this and would appreciate any advice.
Material is a Mac mini (end of 2012), the processor is an Intel Core i5 2.5 GHz, is now 16 GB 1600 MHz DDR3 memory, graphic is Intel HD Graphics 4000 1536 MB, storage is a 500.11 SATA GB Apple drive ST500LM012 HARD drive
Thanks in advance.
Maybe a bad connection tight to the HD. It could be the end of the water which connects to the system board. I had similar symptoms on my Mini 2012 and it is in this regard. Like you if I stop and then after awhile restarted, it would be OK for a while.
It could also be a problem with the HD
-
Unable to connect to the regular administrator account
There was an error Sr 12/23/2011. Since then cannot connect to my normal administrator account. How can I get it back? Windows XP.
First of all, let me reassure you some tips here to have a secure password is useless. No disrespect intended to the poster, but the pirates do not fly the password for your Windows user account. User passwords are those of your immediate family keep honest. I have two software that I can use to crack your password no matter how strong make you in a matter of 5 minutes or less.
This action stabilized the question of free space drops to about 1.5 GB, not even enough for comfort. Other issues include slow response time, many errors with IE 8. Actions tried include: 1. Uninstall and reinstall IE 8 - always target the pop-up errors, many of which indicate no recognized script.
Install IE 9 and disable script errors:
To disable the script debugger in Internet Explorer 8, follow these steps: these instructions work for all versions
- On the Tools menu, click Internet Options.
- On the Advanced tab, click to select the Disable script debugging (Internet Explorer) check box. and then click OK .
- Click to select the Disable script debugging (other) check box. and then click OK .
I would like to know if you want help with any other questions.
-
can only connect to the account administrator in safe mode
When I try to use my account in what he says newspaper failure
Hi ronchellehill,-Remember to make changes to your account after that this problem started to happen?-What, exactly, is a transcript of the error message that you receive everything by trying to connect to your account?You are able to connect to the administrator mode safe account, create a new account user with administrator rights for yourself and use the computer in Normal mode.After back with more details on the State of connection failure of your account to help us you help better. -
To connect to the internal interface and access the LAN
Hello
I have the following problem, I have a Cisco 2811 router with a serial number and an ethernet interface. On the serial port, I have an address got from the ISP, but not a real IP address. It's a 30 ip only for communication ECCAS my site and the ISP and the ethernet I one of the addresses of my range. I have have need allow VPN connections on this address (ethernet one) and access hosts on the internal LAN.
I am able to connect to the VPN, but I can't reach any host inside the LAN
Is it possible to display relevant configuration
crypto-address ethernet card must be present in the router.
What also makes sh crypto isakmp her and sh crypto ipsec his give?
-
Unable to connect to the internal network of SSL VPN
Setting the time first ASA 5512 and I did a lot of research to solve my problem but no luck. I really appreciate if I can get help.
After having successfully connected to ASA via SSL VPN. I am only able to ping to the outside interface (10.2.11.4).
Please check my config and I would like to know what the problem is. Thank you
: Saved
:
ASA 9.1 Version 2
!
hostname asa-01
domain corporate.local
activate t8tpEme73dn9e0.9 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
t8tpEme73dn9e0.9 encrypted passwd
names of
sslvpn-ip-pool 10.255.255.1 mask - 255.255.255.0 IP local pool 10.255.255.100
!
interface GigabitEthernet0/0
nameif outside
security-level 50
IP 10.2.11.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 10.2.255.18 255.255.255.248
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 0
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
clock timezone STD - 7
clock to summer time recurring MDT
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
Server name 10.2.9.23
10.2.1.1 server name
Server name 10.2.9.24
domain corporate.local
network of Trusted subject
10.2.0.0 subnet 255.255.0.0
the object to the outside network
10.2.11.0 subnet 255.255.255.0
network ss object
10.2.11.0 subnet 255.255.255.0
network of the VPNlocalIP object
10.255.255.0 subnet 255.255.255.0
the object of the LAN network
10.2.9.0 subnet 255.255.255.0
network of the VPN-INSIDE object
subnet 10.2.255.16 255.255.255.248
tcp4433 tcp service object-group
port-object eq 4433
standard access list permits 10.2.255.16 SPLIT-TUNNEL 255.255.255.248
standard access list permits 10.2.11.0 SPLIT-TUNNEL 255.255.255.0
host of access TUNNEL of SPLIT standard allowed 10.2.9.0 list
global_access list extended access allowed object VPNlocalIP object LAN ip
global_access list extended access permitted ip LAN VPNlocalIP object
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.2.8.8
Debugging trace record
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 713.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Static NAT to destination for LAN LAN static VPNlocalIP VPNlocalIP source (indoor, outdoor)
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 10.2.11.1 1
Route inside 10.2.0.0 255.255.0.0 10.2.255.17 1
Route inside 10.255.255.0 255.255.255.0 10.2.255.17 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
CA-Kerberos kerberos protocol AAA-server
CA-Kerberos (inside) host 10.2.9.24 AAA-server
Corp.PRI Kerberos realm
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
http server enable 4431
http 192.168.1.0 255.255.255.0 management
http 10.2.0.0 255.255.0.0 outside
redirect http inside 80
redirect http outside 80
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs 4151
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint2
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint3
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint4
Terminal registration
name of the object CN = vpn.corp.com
ASA_PKC_One key pair
Configure CRL
trustpool crypto ca policyIKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Telnet timeout 15
SSH 10.2.0.0 255.255.0.0 inside
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
outside access management
management of 192.168.1.2 - dhcpd addresses 192.168.1.10
enable dhcpd management
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 10.2.9.23 source outdoors
SSL cipher aes128-sha1-3des-sha1
management of SSL trust-point ASDM_TrustPoint4
SSL-trust outside ASDM_TrustPoint4 point
SSL-trust ASDM_TrustPoint4 inside point
WebVPN
allow outside
No anyconnect essentials
AnyConnect image disk0:/anyconnect-win-3.1.04063-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
list of chip-tunnel TerminalServer mstsc.exe Terminal windows platform
attributes of Group Policy DfltGrpPolicy
value of server DNS 10.2.9.23
L2TP ipsec VPN-tunnel-Protocol ikev1
field default value corp.com
WebVPN
value of customization DfltCustomization
internal group CA-SSLVPN-TEST strategy
attributes of CA-SSLVPN-TEST-group policy
WINS server no
value of server DNS 10.2.9.23
client ssl-VPN-tunnel-Protocol
field default value corp.com
internal group CA-CLIENTLESS-TEST strategy
attributes of group CA-CLIENTLESS-TEST policy
clientless ssl VPN tunnel-Protocol
WebVPN
value of URL-list of the contractors list
chip-tunnel enable TerminalServer
ssluser nS2GfPhvrmh.I/qL encrypted password username
username ssluser attributes
Group-VPN-CA-SSLVPN-TEST strategy
client ssl-VPN-tunnel-Protocol
group-lock AnySSLVPN-TEST value
type of remote access service
username admin privilege 15 encrypted password f4JufzEgsqDt05cH
cluser 3mAXWbcK2ZdaFXHb encrypted password username
cluser attributes username
Group-VPN-CA-CLIENTLESS-TEST strategy
clientless ssl VPN tunnel-Protocol
value of locking group OLY-Clientless
type of remote access service
attributes global-tunnel-group DefaultRAGroup
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultRAGroup webvpn-attributes
CA-ClientLess-portal customization
attributes global-tunnel-group DefaultWEBVPNGroup
sslvpn-pool ip address pool
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultWEBVPNGroup webvpn-attributes
CA-ClientLess-portal customization
remote access to tunnel-group AnySSLVPN-TEST type
tunnel-group AnySSLVPN-TEST general attributes
sslvpn-pool ip address pool
CA-group-Kerberos authentication server
CA-SSLVPN-TEST of the policy by default-group
tunnel-group AnySSLVPN-TEST webvpn-attributes
OLY-portal customization
Disable Group-alias AnySSLVPN-TEST
Disable AnySSLVPN-TEST-group-alias aliases
OLY-SSLVPN disable group-alias
enable SSLVPN group-alias
type tunnel-group OLY-Clientless Remote access
OLY-Clientless General attributes tunnel-group
CA-group-Kerberos authentication server
Group Policy - by default-CA-CLIENTLESS-TEST
OLY-Clientless webvpn-attributes tunnel-group
CA-ClientLess-portal customization
try to master timeout NBNS-server 10.2.9.23 2 2
Group-alias Clientless enable
Group-aka cl disable!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
class class by default
Statistical accounting of user
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group 3 monthly periodic inventory
Subscribe to alert-group configuration periodic monthly 3
daily periodic subscribe to alert-group telemetry
Cryptochecksum:ceea6b06a18781a23e6b5dde6b591704
: end
ASDM image disk0: / asdm - 713.bin
don't allow no asdm historyHello
I'm glad to hear it works
Please do not forget to mark a reply as the right answer or useful answers to rate
-Jouni
-
SSL connection to the server on the Internet on the BIS to Airtel plan
Dear experts,
I am a newbie in the development of BlackBerry and have developed an application that requires users to register via the BlackBerry https connection.
I test the app on BlackBerry 9000 "BOLD" with an upgrade of the OS to version 5.0 provided by Airtel carrier.
I searched the many posts here and tried to use the ConnectionFactory to check that I have selected the right access point for the network. Recording works fine on WiFi.
However, im using a BIS plan and when I try to record OTA it fails
Based pointers to the code below and the application event log would be really useful.
int[] preferredTransportTypes = {TransportInfo.TRANSPORT_TCP_WIFI, TransportInfo.TRANSPORT_MDS, TransportInfo.TRANSPORT_WAP2, TransportInfo.TRANSPORT_TCP_CELLULAR, TransportInfo.TRANSPORT_BIS_B }; ConnectionDescriptor conDescriptor = factory.getConnection(req.getUrl()); HttpsConnection request=null; if ( conDescriptor != null ) { // connection suceeded int transportUsed = conDescriptor.getTransportDescriptor().getTransportType(); Logger.log("Using transport type:" + transportUsed); // using the connection request = (HttpsConnection) conDescriptor.getConnection(); } else { ServerResponse response = new ServerResponse(); response.setErrorMessage("No connectivity to Server!"); response.setStatusCode(-1); return response; } addHeaderParams(request, req); switch (req.getReqType()) { case RequestType.GET: { request.setRequestMethod(HttpConnection.GET); break; } case RequestType.POST: case RequestType.PUT: { request.setRequestMethod(HttpConnection.POST); addBodyParams(request, req); break; } } return executeRequest(request); } private static ServerResponse executeRequest(HttpsConnection request) throws Exception { ServerResponse resp = new ServerResponse(); resp.setStatusCode(request.getResponseCode()); if (request.getResponseCode() != HttpConnection.HTTP_OK) { resp.setErrorMessage(request.getResponseMessage()); } else { InputStream is=null; try { is = request.openInputStream(); int len = (int) request.getLength(); if (len > 0) { int actual = 0; int read = 0; byte[] data = new byte[len]; while ((read != len) && (actual != -1)) { actual = is.read(data, read, len - read); read += actual; } resp.setBody(new String(data).toString()); } else if (len == -1) { StringBuffer out = new StringBuffer(); byte[] b = new byte[4096]; for (int n; (n = is.read(b)) != -1;) { out.append(new String(b, 0, n)); } resp.setBody(out.toString()); } }catch(Exception e) { Logger.log(e); } finally { if (is!=null) is.close(); } } return resp; }
Here is the log of the events of the connection failed
I have net.rim.networkapi - net.rim.device.cldc.io.ssl of the FATF.
It is indeed a good question. I suspect the answer may depend on your provider, in this case Airtel. Their package allows port 443 over WAP?
The only way I know, tests, that it is to create a small program of socket based and do try port 60, who must work, and then port 443. But it is probably easier to contact Airtel and ask.
-
Creating a key for ssl connection without the clear text password
I followed the link below to activate the SSL protocol.
http://www.gemstone.com/docs/HTML/GemFire/6.0.0/SystemAdministratorsGuide/security.6.33.html
As metnioned on this link, it is risky to specifying the truststorepassword and keystorepassword in plain text. It is advisable to use PKCS, but when I generate a PKCS key, he asks me again for keystorepassword. For authentication, where I authenticator, it can still work as I can generate key and password that I can later set in:
Security-cipherpass-filepath
Security-cipherkey-filepath
But how to configure SSL communication to use the files encrypted?
It's your choice how store and protect your security credentials. In the case of ssh, for example, which stores the credentials in a file .ssh in the home folder of the user, the credentials are protected using the appropriate file permissions: private keys must have read and write permissions set for the owner (600) only, and the public key are allowed to be readable by everyone. You can also use the file permissions to protect your credentials instead of encrypt.
In addition, in GemFire 7.0 all security-* properties can be stored in a separate file, called gfsecurity.properties, which can then be protected using file permissions.
-
I have a product key.
Is this different from the serial number?
Ask what you were sent... that MAY have been a redemption to Amazon code
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-
Reset the connection of the server administrator
How can I reset password!
I get an error when I try to open a session management Essbase Server
?????
Localhost
Admin
XXXXXXXX
Connection error
Please notify
Yesterday ask you a question about the design and installation of a 11.1.2.3 environment, now you ask where newspapers are, turn on I lost the account the number of times that you asked for newspapers.
I'll leave that to other people because I'm fed up
See you soon
John
-
wireless connection with the non-administrateurs problem
We use our cell phones to A60122 satellite with Windows 2000 in a windows 2000 domain.
Only a local administrator can use the wireless network adapter. Any other user gets a ' no connection / cable disconnected "error. They cannot even log on - field not found.
With the wired carte_reseau, everything works fine.Someone at - it an idea where to start looking?
Hello
Have you tried to give rights of administration for all users?
Maybe you are looking for
-
Original title: back command. Then I run ipconfig/all and show the command ping at the command prompt ipconfig/all error is not recognized as internal or external, command an executable program or a file of commands in windows xp professional sp3
-
Error began yesterday, after I've deleted and reinstalled Adobe Reader software. While at it, I also removed two other programs: browser Opera and PDF fill (a PDF Editor). I tried the system restore of my 8/24 on-demand Restore Point - there is no
-
Auto-Mute microphone and levels to go down to zero
Hi all. I came to a recent issue with my computer. My automutes micro itself and levels to go down to zero as well. Even if I manually adjust the levels to 100 and reactivate the sound it resets and automutes again after a short period (less than a m
-
"View Adobe PDF results" does not
I have "View Adobe PDF results" checked in the print preferences, but he can't. The only way I can see the result is to find the document in the browser and open it. I did not always have this problem, but I don't remember when it started. I use Acro
-
vSphere troubleshooting workshop or Optimize and scale
Which is the best exam preparation and training? 5.5 vSphere troubleshooting or Optimize and scale workshop?