After trying to install Windows updates, my computer turns off.

Similar Questions

• After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.

  Visa update problem

  After trying to install the updates.  my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer.  I tried to follow the instructions provided here because it seemed to be the same problem.  But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode.  Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '.  I can't get out of this cycle.  I installed the update because it said I needed to install it.

  *************************************************************************************************************************************************

  Turn off your computer by holding the power button for about 20 seconds.
   
  Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears
   
  Disable the automatic restart in the event of system failure:
   
  • Click Start
  • Click on Control Panel
  • Click on system and Maintenance link.
  • Click on the system link
  • In the left pane, click Advanced system settings
  • Locate the startup and recovery area, click the settings button.
  • In the startup and recovery window, uncheck the box next to automatically restart.
  • Click OK in the startup and recovery window
  • Click OK in the System Properties window
  • Close the system window
   
  After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.
   
  For the sake of space I refer you to the article about how to proceed.
   
  System restore
  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx
   
  Windows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspx
   
  Please let us know if this solution works for you

  Theresa
  Microsoft Answers Support Engineer

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• While trying to install windows updates, I get an error 57F Code - Windows Update encountered an unknown error.

  For months, that I tried to install windows updates and continually get 57F error Code - Windows Update encountered an unknown error.  I'm now 9 updates important and 2 Optional updates that have failed to be updated.  I am running Windows Vista Home Premium. Help, please!

  Office 2007 are in guess some updates.

  1. ensure that you are logoned on with an administrator account and that the computer can access the Internet properly.

  2 - Insert the Office 2007 CD drive of the computer installation CD, then check if updates Office can be installed.

  Did you use a registry cleaner?

  TaurArian [MVP] 2005-2010 - Update Services

• I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader.

  I have a Sony Vaio. After that I installed Windows 7, the computer does nor recognize the SD card reader. Someone know whey and how to fix it? Thank you

  Run Windows Update - it may install drivers that does not get installed on Windows 7 home.

  If this does not help, look for Windows 7 drivers for this device on the Sony web site.

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• Error code 643 trying to install Windows updates

  Initial problems of title-update

  I get a code of 643 error when trying to install windows updates.updates are not configured properly, go back to changes.and gets stuck on this page for hours

  Darlene

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

  UTC/GMT is 17:42 Monday, November 26, 2012

• I get an error code 80240016 while trying to install windows updates

  Original title: update windows

  I am trying to install windows updates, but I keep getting the error code 80240016 fact anyone know what this means?

  Hello

  Follow the steps in troubleshooting section and check if that helps:

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  http://support.Microsoft.com/kb/957307

• my computer went non responsive after trying to install windows 7

  My office while trying to install windows 7 has stpped answer after 1 hour, still nothing 1 hour later, approximateley ideas?

  Start by unplugging devices external, discs additional (just leave the reader who connected Windows installed. For laptops to ensure that you are connected to an electrical outlet and not running off the battery voltage.

  J W Stuart: http://www.pagestart.com

• HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

  After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

  I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

  Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

  Any help would be greatly appreciated!

  @zenvo2015,

  Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

  Laptops HP - diagnostic system (F2)

  And.

  HP Notebook PC - test a hard drive from BIOS

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Error 8007000D while trying to install windows update

  Hello, my name is Eyal Brandes, and in recent weeks I can not install updates on my laptop because I always get the error 8007000D. After a search in the internet for the solution, I tried already recommend it in the following links:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x8007000d

  http://Windows.Microsoft.com/en-us/Windows/answers?TID=e7ce6bc3-C543-42dB-8607-ad622fdbe47d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-8007000D-installing-Windows-updates/93ffd38b-EBEC-4906-9415-32d97a116cc8

  So far, none of these answers help me.

  I must say that my laptop is relatively new, and I don't know that I've never updated my victory-8 since I installed it first.

  I'll thank you for any help to solve the problem.

  Eyal.

  Hello

  We would like to first apologize for not responding to your concerns in a timely and for the inconvenience that this issue may have caused you.

  You can use the DISM health restore command to solve problem of update of Windows 8. See this Microsoft article:

  System update scan tool corrects errors in Windows Update

  http://support.Microsoft.com/kb/947821/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Get the error code 646 when trying to install windows updates.

  Continue to receive the 646 code error when you try to install windows updates

  See: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011-implementation to date of Services

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Error code 646 when trying to install Windows updates.

  Windows updates appear to download but will not be installed.  I tried to go into 'control panel '; Security systems &; then Windows updates.  It checks and concludes that they are downloaded and try to install but won't.   My computer is set to automatically download and install, so I'm never checked to see if they really were the installation so far.  It seems the latest installations of updates took place the 1/11 & 12/01/11.  There has been many failures last year.  Right now, it seems that there are 6 updates important and 6 optional updates that will not be installed.

  I tried to disable my Norton Internet Security and then the installation, but that does not work either.

  Can anyone help?

  Thank you.

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1c7b1ab1-FCBA-4897-bd36-c766addb0cbf >

• Get error codes: 80246002 / 80242016 / while 80004004 trying to install Windows updates

  Original title: help Pleasee! Updates. ERROR CODES: 80246002 / 80242016 / 80004004. Important. __

  Here's the problem: Internet explorer 8 for windows Vista error code: 80246002 / updates of security for windows (KB938464) (KB952709) (KB951376) error code: 80242016 and security update for windows Vista (KB954459) error code: 80004004. They are all important and I can't find help anywhere. Can someone help me solve this problem? I go to the website listed in detail and can't guess what no problem help. What good is supported if they do not?

  Hi RhondaJean,
   
  I suggest that you put your computer in a clean boot State and then install the updates that are mentioned. The issue could be related to a third party software conflict causing the issue (error codes) to occur. Clean boot helps eliminate conflicts of third party software.
   
  Note: Follow step 7 to your computer as usual.
  KB that you can download and install
  KB938464
  KB952709
  KB951376
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]