administrative password does not work cant get in Control Panel changes

Similar Questions

• only a single user account set up my password does not work cant get in computer how to get back in

  I have only a compound forgotten password on the other user account can not enter in my computer at all the

  Hi Billy,

  Demarrer start in safe mode, press F8 when the power & use administrator as username & password will be empty, and then press ENTER.

  Once you have started, go to Control Panelthen user accounts select the user you want to change. Then, restart the system. Use the same user name & where you changed your password.
  Kind regards
  J Chambers

• Somehow my diary of the administrator password does not work, no disc reset

  original title: locked out! Help, please

  Somehow my diary of the administrator password does not work. I tried everyting. I use Windows Vista.

  I continue to be asked to provide a 'A' floppy to recover my password, but there is no floppy drive on my computer.  I have not configured a retreival diskette.

  I am not able to access all the programs that I installed as an administrator through the comments log in.

  I tried to re - install the complete operating system after no longer being able to access my programs and I am not allowed to do it either.

  I'm at my wit's end! Can someone please?

  Thank you

  Completely lost in cyber space.

  Hello AdrianaMonti,

  I'm sorry but the Microsoft forum rules do not help users circumvent passwords of Windows OS or software systems.

  I do not understand why you have problems with re-setup because it has nothing to do with your original administrator password. Your copy of Windows came pre-installed on your PC or did you buy a boxed copy and install it yourself?

  If you are unable to re - install probably you get error messages. What these error messages?

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• WRT160N... password does not work to get back in line to restore settings after update firmware.

  The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected.  I was hoping that would solve the problem.

  Failed to connect to router just after the firmware has been updated successfully (what said on the screen), but could not use "continue" to to precede.

  Because the screen indicates the success, I closed the browser and reset the default router.

  The next step in the process is to access the configuration page of the router web-based and restore my settings.

  The PROBLEM... Now my password does not work to allow me access to the page of the router's web-based Setup to restore the settings.

  I have an account, but nowhere in the account he mentions the password settings.

  When you reset the default router, the router returns to a cache of user name and a password of 'admin' (without the quotes).  Please try to connect to your router.

  If you continue to have problems, then you must try to reset the router by default.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• my administrator password does not work after the upgrade to Windows 7 Ultimate and can not get as administrator__

  Failed to get on as an administrator on new Wwindows & Ultimate

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Windows 7 Administrator password does not work

  My password worked before and I know the password. But it doesn't work anymore. I was told to remove the connection administrator to display icon making it inactive. Now, I can't login with the administrator account or the second user as an administrator. The imagined two message incorrect password. The two passwords are correct.

  I was not able to save the password initially as he needs to be to save to a floppy disk and I don't have a floppy drive. He could not save on cd or USB, so I never had a copy of it. I have the system repair disk, but I don't want to lose my programs.

  Your help is appreciated.

  Hard to say, but if you normally use an account to admin-level during your daily use, this means that you might have contracted a virus simply by visiting a site with an infected server.  When you solve it, make sure that you only use your admin account if you really need to take as administratively reconfigure your network.  In the course of normal daily use, use a non administrator account so that nothing can cause the admin account get accessible.

• My administrator password does not work (I forgot not it). What should I do to access log on as an administrator?

  3 people know the password and none of us were able to get. What can be done to reset the password or to get the password to be accepted? We have no install disc.

  1. make sure that shift caps lock is turned off.
  2. try a different keyboard.

  If that doesn't help, clear the password with NTpasswd.

  Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/ MS - MVP - Elephant Boy computers - don't panic!

• Why my administrator password does not work?

  Whenever I try to remove or install a program, I received the message that I don't have administrator rights, then I have the password and then get an "access denied" message on my C: drive? What is going on? I am the administrator, too!

  Hello

  1. Have you logged as administrator?
  2. You did any recent changes?
  3. What is the exact error message you get?

  I suggest to start the computer in safe mode and check if the same question:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  It will be useful.

• Pavilion g4: administrator password does not work bangoura and and the deactivation of the system 85109974

  Please help me soon

  Hello

  You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.

  or use the code to reset below

  30861370

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.

  Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.

  Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.

  It will be useful.

• my password does not work on windows vista. I get the message user profile service has no logon

  My password does not work. I get the message user profile service has no logon. Help please.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• my password does not work, but I could connect before

  my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Administrator password does not not under Vista

  I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?

  You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.

  Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:

  You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• password does not work

  How can I get my password fixed, it won't let me connect you update my flash drive?

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• My password does not work. "" Contact ID does not recognize your fingerprint ".

  My password does not work. "" Contact ID does not recognize your fingerprint ".

  See 'Get help with Touch ID' here:

  Use the ID Touch on iPhone and iPad - Apple Support