Administrator user profile questions

Similar Questions

• Active Directory user profile question

  I have a weird problem.  I use two server Remote Office Server R2 2012 with roaming profiles.  If I create a new user profile in active directory all works fine.  I had a situation where I had to remove a user profile for cause of termination.  He was rehired after 3 days.  I created a new profile with the same username as before.  Now, when the user connects, they are logged in a temporary profile.  There is no .bak profile lists on with rds server.  Event files give a 1521 event ID Windows cannot locate the server copy of your roaming profile and is trying to connect you with your local profile. Changes to the profile will not be copied to the server when you log off. This error can be caused by network problems or insufficient security rights.

  DETAIL - access is denied.

  and 1511 Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.

  I thank in advance for your suggestions.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I am not able to connect to my administrator user profile in Windows 7

  I have a laptop HP that I bought last December.

  It has been a nightmare of a laptop, there all kinds of questions remaining connected to wireless internet at home and anywhere else with Internet wireless.

  I came home from work yesterday and when I turned it on, instead of you connecting to my administrator account as it has done every other time I started the laptop.  It is said that my administrator profile are not accessible and that they connected me to a temporary account.

  My admin profile is the only profile on the laptop.

  I tried to let it sit all night and restarted today and got the same message.

  Is there a simple way to solve this problem?  I got an extended warranty from Staples when I bought it that I can use if repair is serious, but I want to fix without sending the computer com

  I'm not a have a password on the account, but I don't think that is the question.

  Please help me if you can, otherwise I will to get repair.

  Thank you!!

  My admin profile is the only profile on the laptop.

  That is where you fell down.

  First of all, there is no need at all to launch Windows 7 as administrator on a daily basis - you should be run as a Standard user (protected by password) as it is the safest way to the performance of your computer

  Second, you must set up an Admin account (call the Admin if you want - but not administrator!) with a password for access purposes and the elevation of emergency only

  You need to forget everything about XP (if you did) - Windows 7 is much more advanced than XP that it allows to perform a Standard user account administration tasks purely by giving the Admin password.

  This is what UAC (User Account Control) is to...

• How to remove an administrator user profile in windows vista?

  My computer has 2 Administrator profiles. One of them is here over the years and one of them was recently created accidentally. I am trying to remove this accidental profile but when I go into control panel > user accounts > add or remove user accounts and click the appropriate profile, it doesn't have an option "Delete account" as do all other accounts. So I tried the signature on the account I wanted to remove and remove it from there again once, the option 'Remove account' is not there, but he is there for all accounts - same Director of another one. How can I remove this unwanted profile?

  Hello

  By default in OS 4 coming
  Default administrator, guest, help support.ms / remote,.
  You cannot delete default admin, you can remove accidental created admin
  Instead of delete, you can DΘsactiver this admin account, log in as a lead Director
  Press win + r > run > lusrmgr.msc > double click on the administrator to find user folder > click right properties > check account disable > fact
  If you want to disable admin created accidentally do disable same.but only, before taking off to disable that represent files and backup files

• Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

  See if the following can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do the system restore.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• I can not connect on my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. s not now what it was

  I can't connect to my user profile who is also the administrator.  I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.

  the operating system is Windows Vista Home Basic 32-bit.

  Hello

  If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.

  Here are the different circumstances where it can help you.

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.

  Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• The user profile Service has not logon. User profile cannot be loaded. (I am the administrator)

  The above message appears when I try to log in.  He only started past today, for no apparent reason.  I can access a different account on my computer, but that information is stored on my own connection.  The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway).  Help... I work from home so it's impossible to get anything done.  Thank you.

  Hello suestev,

  Thanks for posting your question on the Microsoft answers Forum.

  Please see the Microsoft KB article below for assistance with the error:
  KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
  "The user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  I have included several links that addresses the error message for the user profile cannot be loaded.
  You profile might be corrupted and needs to be recreated.

  You can also check the tutorial to
   http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Good thread on Technet dealing with corrupted user profiles
  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/

  How to fix a corrupted user profile:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  If please reply back and let us know if these articles have helped solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Administrator log - on: can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write to * address email is removed from the privacy * for your answer.

  Steve

  Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges?  How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles?  Please write toEmail removed privacy for your answer.

  Steve

  Let me soce entry details:

  1. all computers need to have at least one administrator account. It will not work without it.
  It does NOT, however, create a profile For YOU defaultAdmin. It belongs to the user or the owner to create and decide who is Admin, and who is a regular user.
  2. even an admin account will not get to install and change the settings automatically. UAC (user account control) always appears to ask for confirmation of the task by clicking on continue, or by typing the admin password.
  3 be the main user is not to be an administrator. It is up to the user/owner of the computer to be configured as such.
  That said, now my question... How do you know that you're not an admin?

  t-4-2

• Failed to logon Windows 7 administrator. "User profile Service service has no logon. User profile cannot be loaded. »

  Failed to logon Windows 7 administrator. "User profile Service service has no logon. User profile cannot be loaded. "How can I recover my administrator privileges and solve this problem.

  Hello
   
  I suggest you for this visit provided Microsoft article below.
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
   
  http://support.Microsoft.com/kb/947215
   
  Also I suggest you to activate the administrator account by default on your computer from WinRE and see if the problem is resolved.
   
  You must have the Windows 7 DVD, start the computer to Win from the elevated command prompt, you can follow these steps:
   
  (1) use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).
  (2) in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the appropriate language to install, time and
  currency format and keyboard or input method options and then click Next.
  (3) click on repair your computer.
  4) click 7 installation you want to repair, and then click Next.
  5) click on command prompt.
  At the command prompt, type the following command and press ENTER:
  lusrmgr.msc in the online search and press enter
  NOTE: This file is located in C:\Windows\System32\lusrmgr.msc
  1. open the User Manager and local groups.
  2. in the left pane, click the users folder.
  3. in the middle pane, right click Administrator, and then click Properties.
  4. to activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  5. to deactivate the account administrator of Buit-in-
  (a) check the account is disabled box.
  6. click on OK.
  7. close the windows local users and groups.
  8. close the session, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.
   
  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.
   
  Now of the foregoing provided steps that you need to check if you are able to solve the problem, if you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and check the question below.
   
  Create a new user profile.
   
  You must create a new user account and check the question of do you need to follow the steps below.
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Look for the question, for additional on this issue references, you can consult the forum link provided below.
   
  IF you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Is it possible to create a Local administrator user when you use the Profile Manager to get the configuration settings

  Hello

  We are studying the use of the Profile Manager of OS X as a way to manage our Enterprise macs.

  One of the demands made by the team, is to create an administrator user, as part of the OS X Profile which is lowered to the customer. The rationale is that this would be a way for the it team get, if the fubar user had their Mac

  I did not see this anywhere in the configuration options of the Profile Manager and so ask the people who use it as part of their everyday Toolbox, to find out if such an option is available.

  Thank you and best regards,

  Madan failed

  No, not with the Profile Manager.

  How you deploying your company Mac?  As institutionally imagery or as BYOD devices?  If image, then the image should contain a coherent local administrator account.  If the active image also the Apple Remote Desktop or SSH, you have a method of mass, control and manage the devices.  If BYOD style, then you are out of luck that the end user is the only one with the key of the device.

  You can take a look at following JAMF Casper.  Once devices are registered, you have the possibility to create accounts (However the common method is to create an account on registration).  If you deploy a BYOD approach, you should also look into DEP program Apple (https://deploy.apple.com) as more DEP JAMF (or other MDM) is a very powerful tool for light to zero touch deployment of systems.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• The addition of other security groups (other than Administrator) for roaming user profiles

  We have a few citrix servers configured with the roaming profile. the current permissions for user profiles are 'system', 'servername\administrators', ,

  We want to add that 1 the groups of security more have permissions for newly created user profiles (other than directors). is this possible?
  If so, how?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• "The user profile service failed the log - on" problem of Windows XP administrator account

  OK, so my mom is unable to log on to his profile on Windows XP Home Edition. She has both the administrator account. When she tries to connect, you will see the above error message. My brother can log into his account without problem.

  My mother told me that she had initially gone on ITunes and downloaded 3 things that the program said she needed. When she went to reboot his computer according to the instructions, she received this error message and cannot connect.

  She then guest account and was able to remove the 3 programs, but nothing helped. If anyone has any ideas, it would be appreciated. This is the Windows program that is already installed on the computer.

  I tried to search in the forums, but it's a little confusing. She got also never all warnings "temporary profile".

  Thank you!

  Looks like the user profile is damaged.  To allow for the recovery, you will need to log in with an administrator account.  If your MOM was the only administrator account, try starting mode safe mode (F8 at startup) and log in as user 'administrator '.  The default value is the empty password.  After that, follow the steps in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  t-4-2

• Cannot access my account and I am the administrator of the system. The user profile cannot be loaded

  I can't log into my account. I am the administrator of the system account, but he said: "the service user profile Service has no log on." User profile cannot be loaded. Any suggestions? I can connect to other accounts, but they are not administrative accounts.

  ·                         Restore point:

  Do in Mode safe, if necessary.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.