device can not be access:

Similar Questions

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not using F8 safe mode, so I can not get access to my admin account and therefore cannot uninstall my program

  original title: administrator, f8 safe mode access

  My computer problem begins with not being about to uninstall a program. I need administrator permissions. I am the administrator with a password. I'm not invited to give a. Nothng happens when I press a button with a shield on it. I received another message that tells me "unable to open the access control editor: the system cannot find the specified file. I found the instructions online to restart the computer (by pressing the F8 key) in safe mode. Once in safe mode I can essentially take possession of the C drive and reset admin ACCT. in SUMMARY, I can't have with using F8 safe mode (I tried once bagillion) so I can not get access to my admin account and therefore cannot uninstall my program. Can anyone help?

  I don't know anything about "reset admin account" but here are two things that may help the case to start in safe mode.  First, enter the mode safe mode with f8 key is a matter of time.  On my computer (Dell) during the boot process, I'm going to get a screen send me options of start of f2 and f12, which is to enter the BIOS.  I can start hitting key f8 then but you will in safe mode unless I'm hit immediately after that the screen with f2 & f12 choices goes.  I just hit several times for a few moments at this time.

  If this does not work for you, here's another possibility: http://www.howtogeek.com/howto/windows-vista/force-windows-to-boot-into-safe-mode-without-using-the-f8-key/

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• gadget device can not find the driver

  Cable device ethernet/title: original gadget

  gadget device cannot pilot fid. trying to get 6100g modem to download info.tech said support model parameters are good and ethernet cable is good.

  Hi cqpper,

  You get the error message?

  I want to clarify if you try to download drivers for your modem 6100 g or other devices

  Please provide the full model number (and manufacturer) of your device.

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2: You can view the steps mentioned in the link below to update the drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• virus wiped out my audio device can not find device manager on computer not where

  virus wiped out my audio device... cannot find device manager on computer anywhere... all said that it works correctly

  Hello

  Please go to the Microsoft Community Forums.
  Because the question is not clear, please answer these questions, which will help us to help you best.
   
  1. you are unable to find the audio device in Device Manager?
  2. are you unable to access the device on the computer Manager?
  3. What do you exactly mean by "everything that says it's working properly"
  4. do you get an error message?

  Method 1:
  I suggest you to download and run Microsoft Safety Scanner and check if it helps:

  Reference:
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Check out the link and follow the steps in the article:
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  If the problem persists, please write to us with the answers to the questions above so that we can better help you.

• My DVD does not work: the device can not start because the configuration of the registry is not complete or damaged. (Code 19)

  I ran 'FixIT' - could not resolve the problem.

  Followed the manual guid, but ' ' LowerFilters was not present in my registry and then the guide had no more suggestions.

  Y at - there anyone out there who could help?

  Hello

  Step 1:

  You can try to uninstall the CD/DVD software of engraving. Check out the following link.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Once you uninstall the software, restart the computer.

  Step 2:

  Try to uninstall the CD/DVD drive on Device Manager. Check out the following link.

  Uninstall or reinstall a device

  http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

  Once you uninstall the device, restart the computer.

  Step 3:

  Check the status of the CD/DVD drive in Device Manager.

  See the following link for more information.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

• SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• my account has been temporarily blocked without reason in December and I can not even access

  OK, so in December, my old account was temp blocked without reason, when I didn't play the call of duty with my uncle and his friends. two days later is when it happened. I tried to contact support several times and they always say they can't discuss why it was blocked or when it will be unlocked. Only one, that I talked to sent me here and the rest ignore me and close my support requests without answering. I do not understand why I am blocked nearly 3 years of being a good sport. I swear, when you kill me and when they start talking about the trash I cut the. was still almost 4 months of gold left, which will not be refunded. The main reason I have my account is to play with friends and family who I don't get to see because we are in different States, and it gives us a way to always play things together. Can someone help me please. PS This is my all microsoft account that is blocked not only on xbox.

  If Microsoft has said they cannot discuss, what makes you think we can do something? This is a user forum.

  Windows Live ID support:
  http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

• How can I activate my card Miniport Tun Microsoft? Get the error code (10) the device can not be started.

  Microsoft Tun Miniport adapt #2 /.

  Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10).  I need help to activate the network adapter.

  Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport

  Device ID: root | * tunmp \0001
  status 0 x 01802401 has problem
  0x0000000a problem (10)

  Hi GGisin,
   
  -Did you change on your computer before this problem?
   

  Follow the steps listed in the article below for the mentioned error code:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Note: The information provided in this article are applicable to other versions of Windows XP as well.
   
  Additional reference on:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• How to: A) bypass the pwd admin queued to install & B) recover some files (which I can not even access) to b4 backup reinstall Vista! Pourrait SkyDrive installation/extraction most?

  Idea of someone a joke has been to apply a to my win acct/admin user pwd. oph crack does not work. I seem to be almost out of options. I have a few irreplaceable and very dear/important files I want recovery before reinstalling vista. I can rebuild my programs, but I am a musician/artist/photographer & almost all my work is in the user account that I am blocked (did I mention only they iced the cake by applying parental control?). Could I get past the queue of pwd to install SkyDrive & if so, could I use it to extract pwd protected files?  AAAAAANY IDEAS / would BE so MUCH APPRECIATED & POTENTIALLY LIFE CHANGING! comp was custom built so I have no professional/warranty support. I'm screwed really help people! Thank you.

  Hello

  As you say that you are the owner of the computer, ask the person who set the password to remove it.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  Or try a computer repair shop.

  See you soon.

• I can not get access to my serial number even though I have an electronic receipt for Acrobat Pro XI.  Help!

  Hello

  I bought Acrobat Pro XI online and received an acknowledgement by electronic mail.  When I went to download it, I was unable to complete the process, because I was not provided with a serial number.  I followed the instructions to get one on the site, however I still couldn't get a!  Immediately, a message appears indicating that I am not recognized.  My husband went from Verizon Fios Cat-5 on a coaxial cable for our internet connection between my purchase and my attempt to get the serial number.  Could he have made a difference?  Be that as it may, what should I do?  It's extremely frustrating!  I need to use the software and I have not been able to for the last two days even if I have to pay for it!  Help, please!

  Jennifer

  Thre is no serial number for a subscription. The way it is supposed to work is, you sign in with the SAME Adobe ID code and he knows what you paid for.

• Failed to retrieve the kernel symbols does not have not to initialize the monitoring device can not find valid peer to connect to

  Hello

  I use vmware fusion 5.0.3 on osx 10.7.5. When I start the VM I get these three messages.

  Following this article, I opened the package VM and deleted the .nvram file.

  Still no go.

  I'm a fool. I had renamed some time ago mach_kernel file to test the caching of kernel from loading. This article Impossible to retrieve the kernel symbols gave me the idea to check the file mach.

• Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello

  I recently changed to use AVG free Antivirus Vista 2010 edition and since then (next day) seems to be locked out almost everything on the computer other then IE.  Open any kind of .exe translates into "Windows cannot access the specified device, path or file. You don't have the appropriate permissions to access the item. "I can access the Control Panel, but when I try to run something (a user restore Sys account) nothing happens or I get the same error.  I can not even access/cmd?

  Operating system is vista 64 bit home premium
  Computer has 1 which is defined as administrator SP1
  Tried to do a restore of the system in normal mode and safe, the two will not start.

  I have a feeling I know what the problem is, that when you look at the properties > Security "Progam files" in the 5 groupnames user administrator has not enabled in the lower area of permissions?  Guess a virus has locked all accounts to use the machine key files? (When editing and allowing the admin to have full control etc. in written authorization, I get an "access denied" Message.)  Be honest this really problems out of my PC knowledge, I would usually just reformat if I hit I can't solve a problem, but this time reformating is not the best option.

  Thanks in advance for any help, I would really appreciate it, it left me speechless!

  PS. read through the similar questions and have used the "fix windows' programs, with nothing working or me being not able to access something used.

  Hi Dany88,

  First of all, I would say that you uninstall security antivirus vista 2010 of computer software, since there are several questions on the computer after installing. This software may have created conflicts between other programs on the computer.

  As you face problems to access items from 'Control panel', I would say you visit the security software vendor's Web site and search a tool of suppression using which you can uninstall the software.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If questions are set after uninstalling security software, I suggest that you change the security antivirus vista to some else software or contact the vendor of the software for more information.

  I would also say that you are investigating the computer by using the methods mentioned in the link below.
   
  How to get rid of malware or viruses
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  See the link below to find out how to start in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.