Adobe dropper turning everything to black

Similar Questions

• I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  This issue may cause due to the dual graphics card on your

  Try once step below

  Right click on desktop creative cloud > run with GPU > integrated graphics.

  If the option is not available

  Try disabling the Intel graphics card from Device Manager

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Display turns gray or black (not of) sometimes and not can not be recovered

  Here is some additional information

  I use a laptop with an LCD display
  I am using windows vista and my graphics card is the Mobile Intel 945 Chipset family
  I have updated all drivers for graphics cards, monitor and audio, video and game controllers.
  I've updated directx and used the directx diagnostic tool and no problem not found.
  All microsoft updates have been installed.

  Until the problem occurs my screen tends to flicker.

  The problem occurs most often after that I was using the computer for awhile and it never seems to be any trouble when I first turn on my computer it is only after some time that twinkling begins and ends by then turns grey or black.

  Its usually when I use a lot of video memory when it occurs. For example, when I have several videos to youtube open in multiple tabs

  This will certainly happen if I am posting a video in Win Med Plyr and I full-screen.

  When the display turns gray or black, I can still hear sounds and things like the keyboard, mouse controls and volume are still functional.

  From what I've seen, I feel not as if it was a problem with the screen itself.

  Hi Rjperket,

  Welcome to the Microsoft Answers site!

  are a. When you facing this problem?
  b. when exactly do you get the black screen?

  Method

  Step 1

  You can try to start in safe mode with network and see if it's the same thing.

  Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.

  Do one of the following:
  If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.
  In the Advanced Boot Options screen, use the arrow keys to select the safe mode with networking option and press ENTER.
  Log your computer with a user account with administrator rights.
  If there is no issue here, then try the next step.
  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2

  Reduce hardware acceleration and see if it makes a difference.

  Open display properties. To do this, in Windows Vista, click StartCollapse this includes this image, type display in the search box, and then click Properties to display in the list programs. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click on continue.
  Click the settings tab and then click Advanced.
  On the Performance or the Troubleshooting tab, move the hardware acceleration slider to the left.
  Click OK and then click Close.
  If you are prompted to restart your computer, click Yes.
  Try these steps and let us know the result.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Adobe Reader I have a black square instead of the mouse pointer.

  Adobe Reader I have a black square instead of the mouse pointer. How can I get the return pointer?

  Hello

  To see the AppData folder, please do the following:

  On Windows 7 - Click Start > computer > organize (top-left) > folder and search options > view tab > click "Show hidden files, folders and readers."

  On Windows 10 - click Start > File Explorer > view (top left) > Options > change folder and search options > view tab > click "Show hidden files, folders and readers."

  Here is the screenshot:

  

  Let us know the results.

  Thank you!

• Adobe CC window is all black. Only restart fix. Ideas?

  Given that my apps of ten to twelve finish to install this AM, mozilla has locked up twice and the adobe CC window open all black.

  OK I contacted support and yhey sent me a page that helped me to fix it.

• licensed adobe cs6 turns into trial

  Suddenly my paid and licensed Adobe CS6 Master turns into a trial version. How can I fix this. It does not recognize the original serial number

  https://forums.Adobe.com/search.jspa?q=licensed+Adobe+CS6+turns+to+trial

• I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. The recycled player I

  I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. They are recycled the disc immediately (like crazy, I don't ask for this return to get the data off it.) But fortunately, I have all my data on CrashPlan. I downloaded it and it was working fine except that I downloaded it on the desk and not the original location so he had succeed. I also have an external 1.5 TB drive that I wanted to make it bootable, so I installed Mavericks 10.9.3. Then I advanced and installed on disk newly installed too.

  I think that because I have a new reader that adobe thinks, I have a new computer. I bought the 27 "Mac new on Ebay and it came loaded with the software, including CS6. I have a serial number for CS6, but Adobe says that it was not valid. (I've owned CS2 and CS4 now CS6 that came preloaded on the Mac by the seller who told me that the software has been registered for the Mac?

  I'll re - download the backup to the original location but this time (I still don't think that it will work with Adobe.) What can I do about it?

  iMac 27 inches, end of 2012

  Processor 3.2 GHz Intel Core i5

  Memory 32 GB 1600 MHz DDR3

  Graphics  NVIDIA GeForce GTX 1024 MB 675MX

  Software  OS X 10.9.3 (13D 65) @.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• I tried for several days to update Adobe.  I tried with Kaspersky intact and turn everything off in Kaspersky I see turns off.

  Help, please.  I tried for several days to update Adobe.  I have

  tried with Kaspersky intact and all turn off

  Kaspersky I see turns off.  Please see the attachment for what I

  get when I try to update Adobe.  The first (1st) several pages show

  an attempt to update Adobe with following error messages during the last two

  (2) pages display the parameters of Kaspersky with everything turned off I have

  see turns off.

  If I understand correctly the CS5 update is no longer working properly. It is not your AV.

  Try to download and install the updates manually instead of through the AAM

  Adobe Bridge: For Windows: Adobe Bridge CS5 update 4.0.5

  Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• Bridge turns my photos black and white?

  I have imported just pictures (taken in color in camera RAW) and bridge turns their downturn in black and white. What is going on??? I imported the files from another device (both of Fuji) and they are fine. How can I fix it?

  I've updated bridge CC today with CC PS and LR.

  Finally - reinstalled Adobe Camera Raw and now Adobe Standard in the calibration of the camera menu. I re-imported and all is well again.

  Would be nice if we could choose the calibration of the camera during the import of the bridge. I hope Adobe is listening...

• Adobe AIR applications open to black screen in iOS 8

  Adobe AIR for iOS apps that I've published using Flash Professional CS6 more to properly run on iOS 8. They worked well in the iOS 7.

  After opening, they just cling to a black screen (probably the launch screen - I don't have an image for this).

  Is this a known issue? Are there solutions?

  I found an answer--applications have been published using the AIR SDK 3.4, which I think does not support iOS 8.

  Republished with 15 latest AIR SDK and it works properly.

  Guess I'll have to republish everything.

• Satellite C650 won't turn on / boot (black screen only)

  I am having trouble with my year old Satellite C650. In fact, when I go to turn it on it just won't. The power led on the front of the laptop turns on and the fan starts whirring (only to stop a few seconds later), but there is no change to the screen. I tried to take out the battery, restart, connect, disconnect - basically everything I can think of, but nothing made a difference.

  Can anyone think a possible solution? I really hope this isn't a hardware problem, but I have a horrible feeling that it looks like this...

  Thank you!

  Post edited by: EllieRose: this isn't a C650, 660. Should wear my glasses...

  > Can anyone think a possible solution? I really hope this isn't a hardware problem, but I have a horrible feeling that it looks like this...

  I'm scared of m its hardware problem.
  My advice would not apply to a Toshiba service provider in your country that would check the parts.
  Your laptop doesn't seem to be old so maybe the warranty is still valid and the fix could be done free of charge.

• Adobe Acrobat Reader DC print black number lines

  Hello

  I have a big problem with printing in format Adobe Acrobat, DC. The PDF looks fine in the drive. But when I print it, several lines are replaced by thick black lines. I tried different printers and printing to a PDF file, but the problem remains. When I print the file using another PDF (SumatraPDF) drive, it works perfect.

  It seems that this error after you apply the updated Windows 10 anniversary.

  Kind regards!

  Jonk is correct. Here is the link.

  Acrobat Reader DC print scratches after the update of Windows 10 anniversary

• My chips of color repeatedly turn to gray/black-how can I avoid this?

  My color chips will move to the foreground gray and black background when I have a color picture on the canvas of cloth.  I can't control it and it is a new development. Has anyone experienced this and anyone can give me a solution?

  Suggest that you reset the preferences. It's the usual drill when elements is funny.

  http://help.Adobe.com/en_US/photoshopelements/using/WS3427C0BF-03F8-421B-8CDF-6AC4D42C9983 _WIN.html

• Dear God help me! Why Adobe should turn PhotoShop into a one-program-fits-all solution?

  Hi people,

  It is a form of cry a hole deep enough... I am a professional Retoucher and Artist/Illustrator... Not to boast or waving for attention here, but I spent the last two decades at the top of my game, where using photoshop is concerned, but it seems that this comfort zone is over... I'm drowning my beloved software turned to quicksand under my feet. The very foundation of my professional knowledge has turned to despair because I don't know what to do about this!

  I was silently dying for about two months now after having upgraded from CS3 using CS5... Whenever I update, I roll with the punches. There are sometimes good things, but especially now, professionally speaking, the bells and whistles just weigh down me. Adobe moves the goal post trying to respond to casual users, while undermining the elegance of the function first in the program.

  The question that started me here today is, "removal of pixels" using the "Delete" key when in quick mask, it's driving me crazy...

  PLEEEEASE someone tell me how to disable the 'fill' dialog that appears whenever I press the DELETE key (when I'm in the quick mask).  I want to just delete the "background color" (as I've done since the beginning of time) without the dialogue that adds a new step in the process... It used to be that if I wanted a 'dialogue', I simply press 'shift + delete' (which was a PERFECT solution when I wanted more options), but now this 'shift + delete' is the default position and I don't know how to get around to keep my workflow simplified as possible... Time is money, and the madness at work is a bitter reward for the upgrade of a piece of really professional software.

  I ask Adobe, why trouble what is not broken? ... It used to be perfect... NOW I have 20 YEARS ' worth of reflexive habit creating anxiety in my workflow whenever I now try to use this database functions. It is amazing to be honest. I'm using Photoshop since version 2.5, and the point is that I used to use all Adobe graphics software programs in a concentrated state of MINDLESS... it's to say, ' without thinking '. But no more...

  What's with the constant will to these things too? Once the most elegant of all the software programs (even means Adopbe Illustrator, which reached its peak at version 6), using Photoshop today reminds me heavy Corel Draw dates back to 1989, which was so big and horrible compared to the 2 Illustrator and photoshop 2.5 in those early days... Once upon a time, you knew what the program was, and you know what you had to do the work GET done using the tools available. Now, instead of using the full extent of the program and all these "benefits" I ignore a large part of them, coz they mess HALL added things...

  I want the simplicity of 'form follows function' in the software...

  I have to ask, what's with the new 'zoom' in the PS that doesn't work the same way in other CS5 programs, which are the same as the older versions? ... It is not a bad zoom, actually it has its strong points when you used to, BUT, there is a deployment ridiculous, half-baked idea that should have been implemented across the entire suite programs prior to release. Now, I am suffering between the new zoom jerk in the PS and the traditional zoom (perfect condition) which remains in Illustrator and indesign. It's like having someone cut the grass unless you walking along minding your business.

  You want to work with 3D? ..... Why not use a 3D program dedicated to who will do the job properly and leave the retouch editing tool... I want just a chisel which has a 'Blade '... I have need a tracking radar garnished with x-rays that also allows me to see through walls when firing grenades at my woodwork. ALL I want is hardened steel, and a solid feel in my hands... The program to weaken the bells and whistles in PhotoShop. ..... . WHAT the hell is the 3D feature in Photoshop for? ... Abobe should bring back Dimensions (since nothing they have done since the abandonment of this program can hold a candle to the functionality of this EXCELLENT program niche) for TRUE 3D construction and rendered in postscript format.

  With extensive experience and skills in reference is now an inflexible "rod" down my back, when it comes to this new version. It feels like 20 years of competence goes in the toilet. And for what gain for the serious and capable user? Software and interface additions that undermine the essential power of these once wonderful programs to work effectively, is finally bold and a burden that the software itself does not have to bear.

  Does anyone think this way? Is what someone else frustrated by the bells and whistles overbearing? In my humble opinion, Photoshop has turned to sludge. Try to be all things to all people might expand the market and sell licenses, but she leads me into the wall on a daily basis... Maybe I'm just too old, but I want to get out the tools now...

  Someone please give me and answer this riddle of 'remove key '... I'm going to lose my mind do my 'job '.

  Thanks in advance.

  Sincerely,

  Charles

  Post edited by: blackdog667

  Regarding deleting key bringing up the dialog box to fill (this happens only on a layer of background BTW) - the development team implemented this way to allow the discovery of the user of the Content Aware feature - which is what you want to use for most users, when you delete a part of an image. In earlier versions of Photoshop, the delete key was located to "fill" will be background color (this also only occurs on a background BTW layer) for which he was already a shortcut (cmd + delete) who loses his reason makes the shortcut [Remove].

  Zoom behavior change was also a case of discovery of the user. It is in fact fairly intuitive if you're not used to the way inherited from the zoom. The key is to understand how the new behavior.

  Activate the zoom by clicking on the area you want to zoom in on and hold down the mouse button. When you drag to the right, you zoom in on the point where you clicked initially. When you drag to the left, zoom you out to the point where you clicked initially.

  If you decide that you still prefer the old behavior, you can disable the new behavior by selecting the Zoom tool and unchecking 'Scrubby Zoom' on the toolbar options.

  As pointed out by other users, it seems that you need to update your OS and Photoshop with the latest updates.

  Photoshop to keep updated: http://adobe.ly/PS-Up-To-Date