Adobe programs cannot be opened after installation due to a problem
Hello, I just received my copy of Adobe Creative Suite 5.5. The installation procedure seems to be ok. However, when I try to open all Adobe programs I have error message saying:
Adobe Indesign, or photoshop... CS5.5 cannot be opened because of a problem.
Check with the developer to make sure it works with this version of Mac OS X.
My version of MAC OS X is 10.7.2
You can try running the software from a different user account. CS5.5 should work fine with 10.7.2
Tags: Adobe
Similar Questions
-
the FW program does not open after installation of the trial version
Hello
I have registered the FW trial version yesterday and I can't get promotion launch the walk.
Thank you for m ' indicate how to do emergency.
Kind regards.
Isabelle
Please visit:https://helpx.adobe.com/fireworks/kb/error-fireworks-cannot-run-parameter.html
Error "unable to launch... internal error...". "at the launch of Fireworks CS4
I hope this helps.
Concerning
Megha Rawat
-
Adobe Premiere Elements does not open after installation
Hello
I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.I had a trial version of Photoshop elements 11 and with the code I could access the full version.
However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
I hope you can help me!Thank you!
Inge
Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?
-
Install the hpofficejet XP 4200 series-not Director hp get will open after installation
I have tried to install it from the cd 5 x and once downloaded drivers and can not get the HPDirector opening after installation.
Uninstalled propgram followed on the web directions. machine has recently been reformatted because of a windows error, previously worked on the same machine. Any suggestions?
Hello
Try to install the following hotfix:
Once completed the installation of updated, restart the PC and try openning the HP Director.
Please let me know if this can help,
Shlomi
-
Impossible to get Microsoft Security Essentials open after installation
I installed security essentials and can not opening after installation. I've uninstalled and reinstalled twice. Why can't I open?
To uninstall MSE, follow these steps: http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4, or try to http://support.microsoft.com/kb/2483120.
-
forms cannot be opened after patched QSP R12
Hi all
Please help on below question.
forms cannot be opened after patched QSP R12.
all services are up and runnin.
E - biz: 12.0.6
DB: 11.2.0.2
Thanks in advance.
Concerning
KumarHi Kumar,
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException
Please compile JSP files manually according to the guidelines of these documents and then check.
Blank Page Accessing R12 - ' lack of class: _RF' in OACore application.log [467562.1 ID]
R12 - logon does not work, no error message is displayed [435550.1 ID]
Oracle Application Server diagnostic tools and logs in Applications Release 12 [454178.1 ID] - compiled JSP files are deleted or corruptedThank you
Hussein -
Software does not open after installation on Windows 7
I have a Photosmart 6280 all in one and once the software is installed, the program will not open. Was on the phone with a guy from HP for an hour and he couldn't help. Time to work with Win 7. Anyone has any ideas. Done an uninstall and still does not. I like Win 7, but sure would like to get my printer working.
Have you tried to install the latest drivers for Windows 7 and the software from the following link for your printer?
http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&lang=en&product=3194498
In addition, when you mention that the software does not open, do you mean the HP Solution Center software?
-------------------------------------------------------------------------------
I work with HP, but these comments are my own and not from HP
-
My Adobe Creative cloud does not open after installation.
I tried to fix it myself for a night. Installation of creative cloud will load and after that it's over, he asks anything open. If I try to click on the Adobe CC on my desktop, even as an administrator, it won't make any difference. Help, please! I need it for College. How can I make it work?
EDIT: I tried to uninstall with add or remove programs, CCleaner and even the cleaning of Adobe tool. CCleaner and add or remove programs do nothing if I click on uninstall, and Adobe Cleaner said he has been uninstalled successfully, but still does nothing. It worked on my older laptop.
Please check the help below document:
Applications creative Cloud back in test mode after an update until 2015 for CC
-
Package Adobe Acrobat Pro XI - Bug after installation
Once installed (excluding Exception added for license), Acrobat Pro XI starts nicely without problems. But when I click with the right button on a Web site and selects "Convert to Web page in PDF format" I get an "evaluation version. 30-day trial or buy license now.
How can I correct this before deploying the software in SCCM?
I used the wizard XI of customization of Adobe for Acrobat Pro XI package with the following changes of 'white '.
Personlization Options:
* Username: empty
* Organization: My organization
* Serial number: 1118-xxxx-xxxx-xxxx-xxxx-xxxx (offline Exception)
* Option EULA: checked
Installation options:
* Default viewer for PDF files: make Acrobat PDF defauilt Viewer
* Remove precedent: checked
* Remove all versions of the player: unchecked
Allow optimization: checked
* Enable cache: checked
* Run Installation: unattended
* If necessary restart: remove the reboot
* Application languages: English (United States)
* Acrobat MUI language: en
Features: All inclusive
Files and folders: no change
Registry: Assistant remove Acrobat 8.0 and Adobe CurrentVersion\Run ARM
Shortcuts: Desktop shortcuts removed
All the rest until line and Adobe Services are standard
Online and services online Adobe:
Disable the product updates: checked
* Root of trust charge: turn on & ask before installation
Off the record: checked
* In the launch of PDF in Internet Explorer prompts the user to open/save: checked
Disable help > Digital Editions: unchecked
Disable the customer experience improvement program: checked
Disable the viewing of PDF with ads for Adobe PDF: unchecked
Disable the Adobe online services based on workflows and entry points: checked
Everything else is intact.
Built the transform file and deployed to test clients. All are reporting the right click, convert Web pages with a trial dialog box appear. They can use Acrobat and create PDFs of the application without problem. In the case of Word, I get an error "Adobe Acrobat is not activated. Failed to create the PDF file.
I think that granting the exception offline should have rendered it useless?
To summarize for those who are still confused (I got it to work), deploy the Setup.exe (no order required for installation in silent mode) in SCCM.
The Adobe Customization Wizard allows you to make changes, licenses and other. I used the ACW to inject acrobat.dll value into the value by default "HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe Acrobat\11.0\Language\current\" and then saved as "Custom.mst" changes with the transformation to generate in the ACW.
Edit the Setup.ini file to take into account what you want to do with Setup.exe. Here is mine with a few modifications for the anonymity of the company. Bold lines are the lines added to patch. The "BOLD" to underscore lines are where I've made changes. Note please. 1044 is the only remaining language code. This is to ensure my company that the Norwegian features are prioritized in the installation:
-Departure from Setup.ini-
[Start]
RequireOS = Windows XP
RequireMSI = 3.1
RequireIE = 7.0.0000.0
Require64BitVC10RT = 1
SL/CmdLine ='1044"/spb /rs.
[Product]
MSI = AcroPro.msi
vcrtMsi = vc_red.msi
vcrtDir = VC10RT_x64
Languages =1044
2052 = Chinese simplified
1028 = Chinese traditional
1029 = Czech
1030 = Danish
1043 = Dutch (Netherlands)
1033 = English (United States)
1035 = Finnish
1036 = French (France)
1031 = German (Germany)
1038 = Hungarian
1040 = Italian (Italy)
1041 = Japanese
1042 Korean =
1044 = Norwegian (Bokmål)
1045 = Polish
1046 = Portuguese (Brazil)
1049 = Russian
1051 = Slovak
1060 = Slovenian
1034 = Spanish (traditional)
1053 = Swedish
1055 = Turkish
1058 = Ukrainian
1025 = English with Arabic support
1037 = English with Hebrew support
6156 = French (Morocco)
CmdLine =TRANSFORMS = "Custom.mst" "
PATCH = AcrobatUpd11001.msp
[Windows XP]
PlatformID = 2
MajorVersion = 5
MinorVersion = 1
ServicePackMajor = 3
[Update MSI]
Path = WindowsInstaller-KB893803-v2 - x 86-.exe
-Setup.ini End-
I hope this will help you to deploy Adobe Acrobat Pro 11.0.1 to your company.
Thanks to everyone who helped, and Adobe employees to help us in this matter.
See you soon!
Edit: Some users get a warning for a restart after Setup.exe has completed 30 seconds. This is even when the restart is defined on delete in the file STD ACW. To work around this problem, you can call a file cmd like this Setup:
off @echo
Setup.exe
IF ERRORLEVEL 3010 exit 0
All other error codes will be accual mistakes, so we want those rejected.
Post edited by: Cato-L
-
11i forms not opening after installation
Hello
I installed oracle 11i applications in windows 2003 R2 32 bit.
When installing, nothing error came in sine qua non and post steps also.
Installation also completed successfully, but cannot open forms, no error display for this problem.
But at the opening of the forms, always his demand to install jinitiator if its installed also again asked to install jinitiator.
Please help me solve this problem.
Thank you
Kumar V
Hello
Thanks for the support.
The problem has been solved now.
Solution:
After installing 11i,
I installed jinitiator 1.3.1.21.
And installed Mozilla Firefox 2.0.0.20.
Now open 11i forms.
Because of browser only we have faced this problem.
Thank you & best regards
Kumar V
-
InDesign and InCopy CC will not open after installation
I get the following error messages
trying to open InCopy:
Adobe InCopy does not InCopy Bridge UI. InDesignPlugin as a plug-in. Please reinstall InCopy bridge UI. InDesignPlugin plugin and restart InCopy.
Redisplay this alert?
trying to open InDesign:
Adobe InDesign does not recognize the assignment of the user interface. InDesignPlugin as a plug-in. Please reinstall the assignment UI. InDesignPlugin plugin and restart InDesign.
Redisplay this alert?
I can't hit or not, because the same error guard jumping until I have to force quit.
I'm on a MacBook Air, OS X Yosemite 10.10.1. I have 10.3 free 120 GB.
The installation program was on an external drive and I installed from there (it is always plugged). Could it be the problem?
I uninstalled all CC and reinstalled and get the same problem.
I seem to have answered my own question and I wanted to share the answer in case anyone else had the same problem. Less than a response and more than a work-around (and Peter Spier above answer is probably the best bet) but I did delete the folder of plugins for both InDesign and InCopy, then using a flash drive, copied my files of Plugins of co-workers and that did the trick!
-
Lightroom cc 2015 does not open after installation today, 24/04/15
Today, 24/04/15, downloaded and installed Lightroom cc 2015 on my machine WIN 7 Dell 8300 Desktop. The icon appears on the desktop, but it does not open. I find the .exe file and double clicked on it and it opens either. The list of installed programs shows that Lightroom was installed today, but it does not open. I am currently in Lightroom 5.x, Photoshop cc 2015 and they always start ok; they have been also updated this afternoon. Anyone have the same experience and determine what needs to be done to correct the installation?
Bob F
Robert-
Please try signing out and back in (different from the app) see this link:
log in and log out of the desktop creative cloud application
IF this does not help, please see option 2 at this link:
Lightroom does not launch or closes automatically after the splash screenKind regards
Guinot
-
None of my programs cs6 will open after you have reinstalled cs6 on my iMac. Help?
I had Apple install a new SSD on my iMac and now none of my function of creative suite program. They do not even open. With Illustrator, I do not get any message of error when double clicking. With Photoshop comes an error message: "not could not initialize Photoshop could not initialize CoolType.» And InDesign has an error message, "Adobe InDesign is missing fonts required system or CMap speed. Please reinstall InDesign. I reinstalled the whole creative suite 6 of my drive with my serial number 3 times now and I need help to solve this problem.
uninstall, clean and reinstall correctly by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
not migrate/transfer programs adobe etc.
If you need installation files:
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5.6| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Adobe programs are not open files adobe
I responded to a thread that someone posted on Adobe Reader X (10.1.3) but it seems to have disappeared here.
A few weeks ago Adobe went ahead and installed an update to Adobe Reader X (10.1.3) that made it impossible for me to open PDF files and now my HP Deskjet F4240 no longer works with my system. There is a file open Adobe on my computer my system (button of the window + r + cmd, etc.) does not allow me to 'kill '. I and the following messages:
Statement PDF
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again (0:104).
Error 1311. {File not found source: c:\ProgramData\Adobe\Setup\{AC76B A86 - 74 D 7-1038 - 7B 344 - AA1000000001} \Doc1.cab. Check that the file exists and that you can access.
START THE PROGRAM
AcroRd32.exe
Original file; This incompatible application of computer hard disk
Adobe REader X (10.1.3).)
Files in use
Some wires that need to be updated are currently in use. The following applications use files should be updated by this Setup. Close these applications and click Retry to cintue.
Adobe Reader.
I tired for more than a week to get this mess straightened out. This Adobe file is pernicious.
Of course, looks like it could be a virus or corrupt files. Here are a few things you can check.
Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
My Windows 7 does not open after installation of Windows 8 Preview Release
I have a laptop HP Pavilion g6 2004 TX. I had WIndows 7 Home Basic Edition.
I created a 23 GB partition on my hard drive and installed WIndows 8 Preview Release on that by starting to dvd.
WIndows 8 works fine. It gives me the option to choose between windows 7 and Windows 8 at boot.
When I choose windows 7, HP recovery manager opens and asks me to restore the OS to a previous restore point.
If I allow it, he does and asks to restart. After the restart, yet once he asks me to choose between Windows 7 and 8 to start. If 7 selected even once, the HP Recovery Manager does the same thing again.
I can't open Windows 7 now. What should I do? Should I start Windows 7 recovery discs? He'll do anything for Windows 8? Need help as soon as POSSIBLE. Thanks in advance.
Hello:
The recovery disks will reinstall W7, but will remove, create new partitions (primary and recovery), and format the drive.
This means that your existing installation of W8 is cleared, as well as your current installation of W7 and the recovery partition.
I would recommend if you want to keep windows 8, just wait until the license expires and recover your PC to its original state by using discs of recovery at this time.
Paul
Maybe you are looking for
-
I can't connect to my mini iPad because my old babysitter changed all my info to his! Now I can not log on I have my own camera! Can someone tell me how to reset it without access to his email or info?
-
Cannot install anything.
My Xoom of US - not all of a sudden doesn't let me install anything from the Android Market. I've selected an application, and click on install, I saw a notification skipped upward, bottom right indicating 'Installation', but after a few moments, He
-
Windows continues to change user profile folder
Hi all I'm facing a real headache. My computer continues to change user profiles folder every restart 2 or 3. For example, my user name is MSF\Bob. The user profile folder has been C:\Document & Settings\Bob. After a restart, Windows create a C:\Doc
-
Universal Serial Bus undetected at all!
Hi everyone, I have a HP Pavilion dv6-7010us Entertainment PC and I have problem where my USB ports do not work. When I plug in my external hard drive, the computer does not even see it. My specs: Processor: AMD A8 - 4500M APU with 4 logical processo
-
Is it possible to make a password reset disk for windows 7 by using windows 8?
Original title: password reset disk Is it possible to make a password reset disk for windows 7 by using windows 8. The reason why I ask this is because our Toshiba satellite laptop was stolen when our House was robbed. Fortunately the police recovere