adobeconverter_8_8.exe could not be downloaded when you use windows 8.1 and IE 11

I get errors when downloading this file on the adobe Web site, even when you're connected. This happened for some time.

Well, have you even tried another browser?

Mylenium

Tags: Adobe

Similar Questions

  • "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

    Original title: loss of entrance of Protocol in the list of saved files

    I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

    Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

    It's a good thing, I thought of the research on other boards for my missing post.

    HKEY_LOCAL_MACHINE\Software\Classes\mailto

    c. in the Edit menu, select new, then clickstring goodwill.

    d. type of Protocol of URL as the name of the new string value

    e. exit the registry editor

  • I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

    I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

    Hello

    · What is the edition of windows that you have installed?

    · What is the service pack installed?

    Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

  • "CreativeCloudSet - Up.exe could not be downloaded.

    I have a new laptop and I get this error when I try to download my first application "'CreativeCloudSet - Up.exe could not be downloaded.'" I am running windows 8 and using IE 10.

    Ideas?

    Thank you

    Hi SailmanDouglas,

    You are on a managed network. If Yes, then try to connect to a source of alternative network and try to reinstall.

    Consult the KB: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information.

    Kind regards

    Romit Sinha

  • I remain unplugged for a long period of receipt message that dns does not when you use windows 7

    I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

    Concerning

    NAWAB IKRAMULLAH KHAN

    Hello

    ·          When the issue started?

    Method 1:

    Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

    For more information about how to run the network troubleshooter, check this link:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Get the network store event of Event Viewer logs.

    Check out this link on the event logs of the resolution of network problems.

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

    Method 2:

    a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

    b. at the command prompt, type the following command and press ENTER:

    ipconfig/flushdns (there is a space between ipconfig and /)

    It will show you the message successfully empty the cache of DNS resolution.

    c. at the command prompt, type the following command and press ENTER:

    ipconfig/registerdns (there is a space between ipconfig and /)

    d. at the command prompt, type the following command and press ENTER:

    ipconfig/all (there is a space between ipconfig and /)

    e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

    g. If this is the case, try this:

    ·          enough ipconfig at the command prompt and press ENTER.

    ·          ipconfig / renew in the command prompt and press ENTER.

    h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  • When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    ===================================
    Try to visit the support site of your new service provider
    and search for instructions on how to set up your email.

  • How can I disable the mouse pad when you use a mouse plug-and-play?

    How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

    Hello

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • You met the C00D10D1 error message when you use Windows Media Player

    Hello

    I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

    You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

    Codec is missing

    Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

    The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

    Hello
     
     
    1. What is the file type or extension that you try to play?

    If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
    Player Windows Media for Windows XP supported Codecs
    http://support.Microsoft.com/kb/291948
     
    Package of Installation of codec
     
    See also:
    Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
    http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
     
    Note: The above are published in the Windows 7 category, but they apply to Windows XP too.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • C00D11C8 error message when you use Windows Media Player

    How to fix C00D11C8 error messages when you use Windows Media Player.

    I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

    I downloaded the GoToMeeting codex and the problem was solved.

  • Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

    I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

    Alan McC
    Do you have other accounts of users on this PC?  If you install this update from the main account?

    You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
    If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Lock on some of my icons, as well on my desktop and visible when you use Windows Explorer.

    I have these small yellow or gold (according to the colors of your screen) padlock superimposed on some of my icons on my desktop and visible when you use Windows Explorer and would would like to know how what they are, and how I can remove them.

    Hi Will,

    Thank you for keeping us posted.

    Glad to know that the problem has been resolved.

    I appreciate all your efforts really to try to solve this problem.

    Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

    We will be happy to help you.

    Thank you.

  • I keep getting out of memory errors when you use Windows Media Player.

    original title: of memory error

    Hi, I have a Windows 7 PC brand new with 12 GB of RAM, but I get low on errors of memory, especially when you use Windows Media Player. I tried:

    -Execution of the antivirus scans

    -Cleaning things out of the startup folder

    -Increase in the size of paging file

    I can't understand what the devil is the cause of this error - as I said, it's a new machine, and is not practically nothing on it yet.

    Any help is appreciated.

    Hello

    Follow these steps and check.

    (a) open 'command prompt' as an administrator (programs, accessories, right-click "command, prompt" run as administrator).

    (b) type the following without the quotes and press ENTER.

    "for %a in (% systemroot%\system32\wm*.dll) do regsvr32 /s %a.

  • WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

    Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

    I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

    Hello

    Have you made changes on the computer before this problem?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

    Method 2:

    Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  • 80070643 error code when you use Windows update

    I am running Windows 7 Home Premium - 32-bit. I get the error code 80070643 when you use Windows update - it fails on the Office Live add-in 1.5. I uninstalled .net Framework and reinstalled. Office Source Engine turned on, started work. Any ideas how I can fix it. I am running Office 2010 beta as well.

    Assuming that Office 2007 or 2003 is also installed, uninstall try Office 2010 Beta and once again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error codes when you use windows update 0 x 643

    Error codes when you use windows update

    Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

    Hey Joe,

    You can check if this article helps.

    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

Maybe you are looking for