Advice needed on Optimal routing device specific and small businesses

Similar Questions

• What is the difference between individuals and small businesses?

  What is the difference between individuals and small businesses?

  Hi Nakrit,

  The individual plan provides only a single application license in your Adobe account.

  According to the individual plan, you have the right for 20 GB of cloud storage space.

  However, the business plan gives you an administration console where you can buy the multiple license.

  Under the business plan, each license offers 100 GB of cloud storage space.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Kind regards

  Sheena

• Advice needed - graphics card for After Effects and Premiere Pro

  Hi all

  I did research of PC in the hope of making an investment in the most powerful PC, I can afford without breaking, and I need some advice.  According to my research online, it would seem that the best configuration for video editing would include an Intel i7 processor and an nVidia GeForce GTX 590 graphics card.

  The problem is that each computer I see who has this combo is significantly more expensive than other computers that have an Intel i7 and GeForce GTX 570.  The best bang for my money, I found was HP - he had an Intel i7 processor but only use a GeForce GTX 550 graphics card.

  You all have my question is this: how much difference do these graphics cards in terms of actual speed and reduce the working time & time in After Effects and first Pro CS5/CS5.5 rendering?  Is - what value the extra $300 - $400 to get the GTX 590?  Or who would only drop a tiny minutes rendering time / performance of the software?  In addition, could get away with high speeds and times of rendering with a GTX 550?

  To give you an idea of what I use this software for: I'm working on wedding HD DSLR video, sometimes with several layers of courses on the effects and transitions; I'll work on videos ranging from a few minutes in length of more than 45 minutes in length.

  I appreciate any input anyone has.  Thank you in advance and Kindest regards!

  -Michael

  Beware of HP systems. In general, they are unperpowered from a perspective of power supply, they use custom PSU which can not be exchanged for something else that HP, they use custom for the power supply dimensions, so it is impossible to replace one yourself and they are anything but attractive from a perspective of RE-ENGINEERING. They are very hard to overclock or not at all and are nothing more than mediocre artists or performers.

  Specifications you gave shows that he is a misconfigured system. An i7-2600 system should have 8 or 16 GB of memory, not 12 GB. It must use the 4 DIMM connectors, not 3. The power supply is low in power for this video card. Primary drive is too much for OS & programs and a complete waste of space. On a well-tuned system 150 GB is more than enough. 2 TB is not appropriate. You miss the 3rd and 4th hard drive, you will really enjoy for the performance.

  In short, these specs look like a waste of money.

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• Hi, I just bought a macbook pro 13 ", however it has no ethernet port, have I need to buy a device of air port and what one do need me?

  I just bought a macbook pro 13 ", however it has no ethernet port, have I need to buy a device of air port and what one do need me?

  Your MacBook Pro has built in WiFi.

  Wi - Fi

  802.11ac wireless Wi - Fi network; IEEE 802.11a/b/g/n compatible

  It is the best way to connect. You will need a router if you don't already have one.

  If you want to use ethernet wire you can use this cable. ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap? fnode = 8 b See the following link for more useful information if you are new to Mac.

  Kim

• Why need a cable modem from a router can send and receive information to a computer?

  Why need a cable modem from a router can send and receive information to a computer?

  On Fri, 14 September 2012 17:14:59 + 0000, stuckfree wrote:

  Why need a cable modem from a router can send and receive information to a computer?

  A router is a device that connects computers (or other type of computer
  devices) to each other on a network and you can send files
  from one computer to the other. It does not connect to the internet, and
  you need a device called a modem vaguely to do this. The modem also
  connects to the router and allows the computers on the network
  (those connected to the router) to connect to the internet.

  However, note that there are some available devices that are
  router-modem combination. If your router is of this type, you do not have
  need a modem.

  Ken Blake, Microsoft MVP

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• HP Elitebook 2570p: need driver for the device system of Base and BMC20702A0 on HP Elitebook 2570p (Windows 7 Pro 64-bit)

  Hi-

  I just installed Windows 7 Professional on my HP Elitebook 2570p, and Device Manager, I'm missing the drivers for the device Base and BMC20702A0 system.

  I went to download HP driver and downloaded page 3 recommended for chipset drivers, but that has not helped.

  Here is the list of the categories of driver for my HP model from the HP Web site.  Where should I go next door to download the drivers?

  Thank you!

  

  Hello:

  You need these drivers for these two devices:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  File name: sp63637.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp66402.exe

• Need driver pls PCI device and SM Bus controller

  Hello, I have a hp pavilion g6-1b60us Notebook PC with AMD processor and running windows 7 ultimate 32-bit, I need:

  -SM Bus controller driver and

  -PCI device driver

  Pls help someone,

  Thank you.

  Hello

  Download and install the drivers for the Chipset from the following link.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  When the installation is complete, restart the laptop.

  Then, for the pci device, it's probably the card reader driver found on the link below (if it is not post returns with the id of the hardware).

  Realtek card reader driver.

  Kind regards

  DP - K

• Please advice on the Configuration of the network and possibilities.

  Hello

  I have a small office at home (me, my wife and 2 employees) and I need to improve my network. It's simply not up to the task.

  Which must be supported:

  • 5 PC desktop
  • 2 notebooks private
  • 2 network printers
  • XBOX
  • NAS
  • Many mobile devices
  • ADSL internet connection
  • Connection internet optical fiber (glass)
  • System network audio (Sonos)

  Right now I use a combination of routers/switches of different brands, and I want to spend it again all devices, all from a brand. That's what I want to do:

  • A wired router to handle the traffic internet ADSL and fiber
  • Several access points wireless (1 device with multiple SSID) or multiple devices: a client, a desk, one for home, one for...
  • Home network of offices on a separate subnet from the network
  • Router must be able to act as an OpenVPN client and tunnel specific IP addresses / ports LAN from the intranet to the VPN service provider (it of to hide my IP address, mainly for private use, not for torrenting, right to privacy)
  • Currently, there is no need to be able to Dáil from outside the office, this could change in the future

  I was thinking to buy the following:

  • LRT224
  • 2 * LAPAC1750 (since the home + office is large enough)

  I reuse a switch 8 ports business grade, no need to replace it.

  My setup is as follows:

  ADSL Modem (bridge mode)-\ /-LAPAC1750 for office and clients (2 SSID)

  > - LRT224 -

  Fiber connection-/ |       \--LAPAC1750 for House- + - OpenVPN connection

  |                                |

  Switch 8 ports (company) + - direct connection

  After reading the manual for both devices, I think that the wireless access points are more then adequate for the task. However, I have my doubts about the LRT224. Yes, it has dual WAN, so perfect for the routing of traffic ADSL or fiber. But the OpenVPN part is not what I need. I need something that is offered by the tomato/DD-WRT flashes for all-in-one routers: OpenVPN client build-in and able to route specific traffic through the VPN tunnel.

  My question is: is this, I want to install, possible with devices metntioned, including a tunnel (via AirVPN) OpenVPN implementation to route the traffic/specific devices through, and multiple wireless access points.

  I hope some of you can help me here. I won't buy an all-in-one wireless router, since a problem with these devices lies between offten, and I like the look and feel of Linksys devices.

  Thanks in advance.

  With sincere friendships.

  Sjoerd

  Edit: fixed formatting and some typo

  LRT routers don't tunnel VPN vendors like the Open Source router firmwares.

• Wired router with POE and Gigabit ethernet to run two AC1750 access points?

  Hello, I'm looking for a recommendation for a wired router with POE and Gigabit ethernet to connect to both access to ceiling LinkSys AC1750 points internet routing on the WAN to a Virgin Media UK cable connection plug - can someone advise a good solution?

  I'm a Home Office / Small Office so user there are several Wired's devices and a mixture of wireless clients. I need at least 8 ethernet outlets. Reliablity and speed performance are important, but not important enough to go overboard on the cost!

  Many thanks to you all.

  I recommend a router Linksys (SMB) LRT214\224 and a switch POE LGS Linksys (SMB). This combination will be very fast and stable.

• Newbie Help Needed: Cisco 1941 router site to site VPN traffic routing issue

  Hello

  Please I need help with a VPN site-to site, I installed a router Cisco 1941 and a VPN concentrator based on Linux (Sophos UTM).

  The VPN is established between them, but I can't say the cisco router to send and receive traffic through the tunnel.

  Please, what missing am me?

  A few exits:

  ISAKMP crypto to show her:

  isakmp crypto #show her

  IPv4 Crypto ISAKMP Security Association

  DST CBC conn-State id

  62.173.32.122 62.173.32.50 QM_IDLE 1045 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  Crypto ipsec to show her:

  Interface: GigabitEthernet0/0

  Tag crypto map: QRIOSMAP, local addr 62.173.32.122

  protégé of the vrf: (none)

  local ident (addr, mask, prot, port): (192.168.20.0/255.255.255.0/0/0)

  Remote ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)

  current_peer 62.173.32.50 port 500

  LICENCE, flags is {origin_is_acl},

  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

  #pkts decaps: 52, #pkts decrypt: 52, #pkts check: 52

  compressed #pkts: 0, unzipped #pkts: 0

  #pkts uncompressed: 0, #pkts compr. has failed: 0

  #pkts not unpacked: 0, #pkts decompress failed: 0

  Errors #send 0, #recv 0 errors

  local crypto endpt. : 62.173.32.122, remote Start crypto. : 62.173.32.50

  Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0

  current outbound SPI: 0x4D7E4817 (1300121623)

  PFS (Y/N): Y, Diffie-Hellman group: group2

  SAS of the esp on arrival:

  SPI: 0xEACF9A (15388570)

  transform: esp-3des esp-md5-hmac.

  running parameters = {Tunnel}

  Conn ID: 2277, flow_id: VPN:277 on board, sibling_flags 80000046, crypto card: QRIOSMAP

  calendar of his: service life remaining (k/s) key: (4491222/1015)

  Size IV: 8 bytes

  support for replay detection: Y

  Status: ACTIVE

  Please see my config:

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  encryption... isakmp key address 62.X.X... 50

  ISAKMP crypto keepalive 10 periodicals

  !

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac TS-QRIOS

  !

  QRIOSMAP 10 ipsec-isakmp crypto map

  peer 62.X.X set... 50

  transformation-TS-QRIOS game

  PFS group2 Set

  match address 100

  !

  !

  !

  !

  !

  interface GigabitEthernet0/0

  Description WAN CONNECTION

  62.X.X IP... 124 255.255.255.248 secondary

  62.X.X IP... 123 255.255.255.248 secondary

  62.X.X IP... 122 255.255.255.248

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  card crypto QRIOSMAP

  !

  interface GigabitEthernet0/0.2

  !

  interface GigabitEthernet0/1

  LAN CONNECTION description $ES_LAN$

  address 192.168.20.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  !

  IP nat pool mypool 62.X.X... ... Of 122 62.X.X 122 30 prefix length

  IP nat inside source list 1 pool mypool overload

  overload of IP nat inside source list 100 interface GigabitEthernet0/0

  !

  access-list 1 permit 192.168.20.0 0.0.0.255

  access-list 2 allow 10.2.0.0 0.0.0.255

  Note access-list 100 category QRIOSVPNTRAFFIC = 4

  Note access-list 100 IPSec rule

  access-list 100 permit ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

  access-list 101 permit esp 62.X.X host... 50 62.X.X host... 122

  access list 101 permit udp host 62.X.X... 50 62.X.X... host isakmp EQ. 122

  access-list 101 permit ahp host 62.X.X... 50 62.X.X host... 122

  access-list 101 deny ip any any newspaper

  access-list 110 deny ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

  access-list 110 permit ip 192.168.20.0 0.0.0.255 any

  !

  !

  !

  !

  sheep allowed 10 route map

  corresponds to the IP 110

  The parts of the configuration you posted seem better than earlier versions of the config. The initial problem was that traffic was not in the VPN tunnel. That works now?

  Here are the things I see in your config

  I don't understand the relationship of these 2 static routes by default. It identifies completely the next hop and a mask the bytes of Middleweight of the next hop. Sort of, it seems that they might be the same. But if they were the same, I don't understand why they both make their appearance in the config. Can provide you details?

  IP route 0.0.0.0 0.0.0.0 62.X.X... 121

  IP route 0.0.0.0 0.0.0.0 62.172.32.121

  This static route implies that there is another network (10.2.0/24) connected through the LAN. But there is no other reference to it and especially not for this translation. So I wonder how it works?

  IP route 10.2.0.0 255.255.255.0 192.168.20.2

  In this pair of static routes, the second route is a specific subnet more and would be included in the first and routes for the next of the same break. So I wonder why they are there are. There is not necessarily a problem, but is perhaps something that could be cleaned up.

  IP route 172.17.0.0 255.255.0.0 Tunnel20

  IP route 172.17.2.0 255.255.255.0 Tunnel20

  And these 2 static routes are similar. The second is a more precise indication and would be included in the first. And it is referred to the same next hop. So why have the other?

  IP route 172.18.0.0 255.255.0.0 Tunnel20

  IP route 172.18.0.0 Tunnel20 255.255.255.252

  HTH

  Rick

• How can I connect to my firefox sync account? When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  I also had this problem until I deleted my sync account in the site and created again.

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?

• Satellite 1000-Z2: I need a driver for the display and the LAN

  Hello

  I reformatted my laptop S1000-Z2, and I have a real problem trying to find all the information about this model!

  Basically, I need a driver for the display and the LAN?

  Best regards

  Austin.

  What operating system do you use?
  If you use XP, you will not find the network on the site recommended driver driver!
  I can't give you advice where to find such driver because I don t know what the LAN card is installed in your oldie.

  But why you n t check yourself? Try to know what the LAN card you use and googel a bit for compatible applications ;)