Wired router with POE and Gigabit ethernet to run two AC1750 access points?

Similar Questions

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Buy two planes? Photographic for 9.99 and 19.99 Indesign at the same time? It s less expensive than 49.99 with applications and I only need this two software

  Hello

  Yes, you can buy the plan of photography as well as one app In-design under the same account.

  Please check the link for purchase https://creative.adobe.com/plans

  Please go through the Adobe - General conditions of subscription as well.

  Hope this helps!

• Two computers router with XP and one with Vista

  Please let me know if I can connect a new computer to Windows Vista desktop to my WRTG54 router to share my dsl connection with my old desktop of Windows XP?  Thank you.

  You can connect your vista to your wired router eithter or wireless if you have the proper equipment. Wired is simply plug-and-play.  You need a wireless adapter if you go wireless.

• Availability of Bluetooth and Gigabit Ethernet?

  I am looking to buy the Pavilion 17-e105sa or 17-e153sa. They have Bluetooth and/or gigabit ethernet connections?

  Thank you

  babyboomer49 wrote:

  I am looking to buy the Pavilion 17-e105sa or 17-e153sa. They have Bluetooth and/or gigabit ethernet connections?

  Thank you

  Hello

  These laptops look pretty same. However, the specifications indicate only 100 Mbps, ethernet card (integrated 10/100 BASE - T Ethernet LAN) and a chip to only b/g/n wifi (802.11b/g/n (1 x 1)). Good news is that you can get the 7260AC from Intel which is a wireless wifi/bluetooth combo card but the ethernet card is probably only fast ethernet card.

• My Canon PIXMA MG6320 will support two computers with two different access points?

  I have a laptop connected to the router and modem satellite exceeds at home and a laptop connected to a router/modem with internet service from Verizon LTE wireless in the same House.  I would like to print on my printer Canon PIXMA MG6320 of two laptops.  Is this possible?  Whenever I try to connect my printer to a second access point, it rolls too one that was already there.

  Thanks for confirming my suspicions, merrymary247.

• Configure a wrt320n and wrt150n as a wireless bridge or access point

  Hello

  I have a question: I would like to connect my old wrt150n as an access point on a different floor of our House because of a bad signal to the second floor of the wrt320n.

  Is a cable modem connected to the wrt320n. I would like to connect wrt150n wireless to the wrt320n, so children can connect to their computer for the wrt150n wireless...

  Is it possible to configure?

  THX in advanced, Peter

  No, it is not possible... Router Linksys will not communicate wirelessly with another router.

• Problems with my 4 port Gigabit Security Router with VPN

  OK, I got a wireless router and I have a Web site hosted by 1and1.com and I could connect my fine site. But recently I got the 4 port Gigabit Security Router with VPN and since then I have not been able to connect to it even, I started my own ftp server it always blocks and it will capture everything until she tries to recover the files, then it expires just after a while

  What is the model number of your device? If you have a Web server and an FTP server behind the router, you will need to transfer the ports used by the said request. Ports TCP 80 and TCP 21.

• WRT54G behind another wired router?

  Hello

  I have a wired network in a small office space.  I would like to buy a wireless router and put on the existing network to add a wireless network.

  WRT54G can be used for this. I would have preferred if the new network was separated, but I would also if it's posible to change the settings of the router so that it begins to work as a simple access point instead.

  I can't change the router of the internet service provider, and I don't want to change the settings in the router either.

  Best regards.

  # This is not possible with your WRT. You cannot prevent attempts to connect from the second router LAN in the first router's LAN. All the second router traffic must pass through the first router that makes everything accessible. You would need equipment to enterprise-level which allows you to filter the arbitrary traffic. But the WRT can do. I can't speak to your wired router.

  If it's only on disabling wireless, you can do that in the web interface of the WRT. You can turn off the wireless radio. Then you can keep the connected WRT.

  The alternative would be to get another (third) router that hosts your internet connection. Then you can connect your router wireless and wired to this third-party router effectively separating the wireless LAN and wired the other sharing the same internet connection.

• VPN router to router with overlapping of internal networks

  Hello Experts,

  A small question. How to configure a VPN router to router with overlap in internal networks?

  Two of my internal networks have ip address 192.168.10.0 and 192.168.10.0

  No link or config will be appreciated. I searched but no luck.

  Thank you

  Randall

  Randall,

  Please see the below URL for the configuration details:

  Configure an IPSec Tunnel between routers with duplicate LAN subnets

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b07ed.shtml

  Let me know if it helps.

  Kind regards

  Arul

  * Please note all useful messages *.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• AC1900-Nighthawk WiFi Range Extender can be wired in and used as an access point?

  I want to replace my WN802T which is connected to the network.

  Found the manual and it can be used as an access point.

• WDS with AP and now I have more than 60

  Wireless domain services

  The problem:

  I am using WDS in my wireless network environment, and a new building will bring counting the points of access to more than 60 years.

  The question:

  What is the best WDS solution for this problem?

  Other Questions:

  Is it possible to have 2 separate access points serve as WDS and divide access between them points?

  I started the implementation of an other WDS on the same subnet and automatically, he went in the backup.

  Any help would be greatly appreciated.

  When my points 100 + access were autonomous, I initially had two different areas of WDS on VLANS separated. In the preparation of the conversion of autonomous LWAP, I found that it is better to do them all on the same vlan. In order to get around the limit of 60 APs, I put them both on the same switch WDS access points and put these two ports in protected mode, while they did not see each other.

  Example:

  interface FastEthernet0/1

  switchport protected

  interface FastEthernet0/2

  switchport protected

  Access points would then contact one of the two AP WDS while the two WDS access points did not see each other. I'm sure this isn't an approved configuration of Cisco but it relieved my LWAP crossing. It should work for you well, but I would say that you can move to the access controller based points.

• Impossible to access wifi with other access points

  WNDR4500v3 with firmware V1.0.0. I32

  I bought this router on dec 25 2015 to replace a dead linksys router.
  The router feeds a switch of 16 points from one of the 4 ports.
  I have a win 7 pc connected to one of the other routers 3 ports.
  Then a VoIP connected to port 3 of the router.
  I have 2 other wireless access points connected to the port 16.
  We feed a remote building through a wired connection to the firset access point
  The other access point is also fed by a wired connection.
  The old linksys router had him for 4 years.

  As I said I bought this router as a replacement... but since its worthless and the two wireless access point do not have internet connection.
  So either I get it work or will return it for a refund within 24 hours.

  Figured that out it was Network Manager and windows share the unknown connection of marking.

  In advanved sharing setting I have to change to use for user accounts and passwords to connect to other computers

  Then all the problems went away.

  No more giving up connection and with no internet connection.

• WRE54G canmot associated not with this access point in Repeater mode.

  Hello

  Because of the concrete walls, I have a weak signal to use the WRE54G to extend my existing wireless network. However, I installed an Ethernet cable and found possible to connect the WRE54G access point. This is my extension of network is via a connection to an Ethernet cable. Is seems to work fine, it allows communications to the internet and shows a power good signal from a remote PC. But it works only in unsafe mode.

  Although I tried to reset, and then follow the instructions to set up a new WEP or WPA encryption, the installation program recognizes the WRE54G, but does not allow me to save the configuration.

  The error it says it is "WRE54G canmot not associate with this access point in Repeater mode.

  Help, please

  Make sure your router's wireless settings and WRE are the same. Try changing the channel on your router, if your router's wireless channel is the default after the procedure, your WRE is unable to communicate with your wireless router.