Please advice on the Configuration of the network and possibilities.

Similar Questions

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• Creative cloud packer "Please connect to the Internet and try again" when on MACOSX Netowork account

  Hello

  I'm having the following problem. We are running a Mac OS x environment on a server open directory (Lion Server). For some reason when I try to use Creative Cloud Packager under a network account I get the error "Please connect to the Internet and try again. The account has local administrator rights in the machine.

  When I log in as a local not network connection account, everything works fine.

  There is no configuration of firewall on network accounts rules, all ports are open.

  Please can someone help. We use administrator accounts network for the administration of the network.

  Concerning

  Hello Fom,

  Site/Port information used by creative teams and Creative Cloud cloud for businesses

  These host/port combinations need to be on a whitelist when connecting with one ID Adobe to download, install and activate licenses for applications via a creative cloud subscription.

  • ccmdls.Adobe.com:443
  • IMS - na1.adobelogin.com:443
  • na1r.Services.Adobe.com:443
  • prod-rel-ffc - ccm.oobesaas.adobe.com:443
  • LM.licenses.adobe.com:443
  • ccmdl.Adobe.com:80
  • swupmf.Adobe.com:80
  • swupdl.Adobe.com:80

  For more information, please see the mentioned link: http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager.html

  See you soon.

• XP has disappeared from the network and I can't get it back

  My XP machine does not appear on my network more.  My network with both XP and a MAC wireless machines worked fine until I added a desktop Windows 7 computer.  Now, one of my XP machines disappeared from the network and I can not get it back.  I have run the Configuration Wizard from the network a million times, but the device still does not appear.  What I am doing wrong?

  From the other thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/windows-xp-machine-does-not-show-up-on-network/fadc36ac-73de-428f-9018-bedebd72cb2d

  Title: Windows XP machine does not appear on the network after that Windows 7 has been added. Also have Mac on the network as well.

  I set up a home network with two XP machines connected to my router and a Mac with a Wi - Fi connection.  I added a Windows 7 machine and now one of the XP machines does not appear as a member of the Working Group on all machines (including itself!) even after the wizard as many times.  Curiously, I can share files and printers.  How can I get this machine to appear on the network?

  original title: home network problem

  Hello

  The following article might be useful:

  Solve problems with computers not appearing is not in the network map

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say I'm dum

  I am trying to download the trial version of Adobe Audition.  He asks me to connect, I get my username and password and I get an error message saying "we are able to contact Adobe.  If please connect to the Internet and try again. "Needless to say that I'm connected to the Internet when I try to do.  Anyone have an idea what is wrong?  Thank you.

  Please try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• restore service dependency for the network and sharing Center

  How to restore the dependency service or group who couldn't start for network and sharing Center?

  Hi patto1708,

  If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.

  For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista

  Kind regards

  SAP U G - Microsoft Support

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• No network adapter is displayed in the network and sharing Center

  My internet connection works very well through a router, but if I go to the network and sharing Center and click on change adapter settings, I get a blank page.
  The adapter appears in Device Manager and it is used by the computer as disabling it kills the internet connection.
  I think that's the reason that I have a network with a red X icon. The ToolTip that appears when the mouse passes over the icon said access to the Internet.
  What would cause the network to do not "see" the adapter, even if it's to use?
  The adapter is a Netgear GA311 gigabit and compatibile with Windows 7.

  Have you installed the drivers of www.netgear.com?

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul