Advisement/audit secure security

Similar Questions

• MICROSOFT WINDOWS ME SAID "LOGIC TO ADVISE SECURITY 2.5.3 HAS STOPPED WORKING" WHAT DOES THAT MEAN? IS IT SERIOUS?

  THIS MESSAGE APPEARS SEVERAL TIMES AND RANDOM WAY AND CONTINUES IT SAYING WINDOWS WILL CLOSE THE PROGRAM. AND IF A SOLUTION IS FOUND - BUT THEY NEVER DO

  For me looks like you are infected or "Logic of security adviser" does not work as it should.  In my opinion, that makes no sense to advise Microsoft security.  If the 'logic of security adviser' is defective, you must contact the vendor for this program.

  In addition, you have installed Microsoft Security Essentials?

  Also, don't be afraid to release the CAPS LOCK key...

  Doc

• Web security threat - onlineperformanceworms

  I received this message on my control (McAfee security, not microsoft, double contingency audit) security and get advice on that. You can implement an update to remove this? I have to worry about this?   1 dangerous site: these sites have proved to have significant risks: Onlineperformanceworm.in.  Grateful for your advice.  Why microsoft or AVG doesn't remove it?

  Hello

  I suggest you to return the item and check if it helps:

  Beware of fake virus alerts

  http://www.Microsoft.com/security/PC-security/antivirus-rogue.aspx

  I suggest contact you also McAfee as the software detects the threat.

  http://www.McAfee.com/us/support.aspx

• Security message persistent downloading of email PDF files

  Updates that you have installed the last week did not cause the behavior that you see, so don't "revoke" none of them! I think something was wrong already and install updates only the surface of the problem.

  • 
    Translation: I never had someone to uninstall ("revoke") advise a security update. In other words, the computer must NOT be connected to the internet if KB2957689, KB2957503, KB2957509, KB2939576, KB2957189 and KB2926765 are not listed in the installed updates.
    

  REPOST : Because the computer had a fully functional anti-virus application, installed for several years, there's a chance, but remote, you can see the effects of a 'hijackware infection' and that MSE has never worked correctly.

  That being said...

  Were the emails with PDF attachments sent by people using MS Outlook (not Outlook.com) as their e-mail client?

  If you send an email and attach a PDF file that is saved on your hard disk, you see the same behavior when you open the message received?
  

  If you uninstall Adobe Reader X (v10.1.10) and then perform a new installation of Adobe Reader XI (v11.07) [1] or Foxit Reader, the behavior persists?

  =====================================================
  [1] ATTENTION all pre-selected options for 'drive-by' install unwanted software, third party (for example, that the Google toolbar; Google Chrome)!

  Robear: OK, I'm not updates.

  I can't really ask customers about how they do their email! I've collected PDF documents, I was recently and earlier, and some I downloaded from old newspaper web sites and sent them through several mail clients and browsers and they all show the same problem.

  Your link to Adobe Reader 11.0.7 redirects to a page with 10.1.4 on it, a version earlier than the one I already had. He seems to think of Adobe, I don't deserve to have 11 because my OS is Vista. There are other sites that have, you recommend one, for example. FileHippo?

• Windows 7 - security popup

  Original title: Hi, I was wondering if anyone can help me with this?

  I used to work for this organization, but I can't seem to remove the Windows security popup that keeps asking for my references here is the log:

  12/30/2012 success audit security of Microsoft Windows from 15:00:17 - system - provider [name] Microsoft-Windows-security-auditing [Guid] {54849625-5478-4994-A5BA-3E3B0328C30D} 0 x 8020000000000000 - TimeCreated [SystemTime] 2012: keywords for the task 12548 Opcode 0 level 0 EventID 4672 Version 0-12 - 30 T 04: 00:17.368590800Z EventRecordID 48308 correlation - execution [ProcessID] 936 [ThreadID] 2980 channel Kerry-PC computer security

  12/30/2012 success audit security of Microsoft Windows from 15:00:17
  -System

  -Supplier

  [Name]  Microsoft-Windows-security-auditing
  [Guid]  {54849625-5478-4994-A5BA-3E3B0328C30D}
   
  EventID 4672
   
  Version 0
   
  Level 0
   
  Task 12548
   
  Opcode 0
   
  Keywords 0 x 8020000000000000
   
  -TimeCreated

  [SystemTime] 2012-12 - 30 T 04: 00:17.368590800Z
   
  EventRecordID 48308
   
  Correlation
   
  -Execution

  [ProcessID] 936
  [ThreadID] 2980
   
  Security of channels
   
  Kerry computer PC

  Hi Grace,

  Thanks for the reply.

  I suggest to create a new user account and check if you are able to save the file:

  Create a user profile

  If the new user profile resolves the problem, you can fix the corrupted profile.

  Reference:

  Difficulty of a corrupted user profile

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Automatic update of Windows buttons are not accessible

  Automatic update of Windows buttons are gryed out and not accessible. I can not change or modify my update settings

  Always indicate what Windows operating system you are using including the Service Pack level and also to advise what security software you use.

  1 check for the 'Automatic update' service manager
  Click Start, select run, and type: Services.msc
  Press enter
  Locate the - "automatic update".
  Make sure that the service is not disabled and started.

  2. If the service is disabled and cannot be started:

  Go to START, select RUN
  Type: regsvr32 c:\windows\system32\wuaueng.dll
  Press Ok

  See also: http://support.microsoft.com/kb/883614/en-us

  and/or

  Automatic Updates options are grayed out? :
  http://WindowsXP.MVPs.org/aupolicy.htm

  TaurArian [MVP] 2005-2011 - Update Services

• BlackBerry Smartphones Blackberry won't turn on!

  -Very well, so I have a Blackberry 8330 and it won't turn. I recognize that I had it fell about a month and a half, I put it in rice and got a new battery and it worked perfectly, a little slower than usual, but it is eventually accelerated. Very recently he started having very slow and laggy. I deleted the cache and there are no photos or music or whatever it is on my phone, all detained on an SD card, but when I do text, I could text at least a sentence or more until he started to show me what I had typed, but is not the issue. After a few days ago, there was one night I had to turn off my phone to charge, but it got stuck on the screen of Verizon with the black background and logo Verizon for about 8 or 9 minutes, I so disconnected from my computer and took the battery, then put the file in. About 10 minutes later, I returned to my phone to see that it got stuck on the reboot page, which usually takes me about 5 minutes to do. I pressed the end key and it changed to page "Audit Security Software' on my home screen, and when he got 100% on my phone is off, so I clicked on the call button repeatedly until she came back (throughout all this, my phone was about 3/4 the battery left). When she finally returned, he has once more stuck on reboot with the hourglass page and I waited a few minutes and repeated button hang up a couple of times and it takes about 30% of something and just died on me. So I gave up and went to bed. The next morning [this morning] I approached it in the hope that it would be perfectly fine. My hopes were false. When I tried to turn it on, it just had this red light and it it on my alarm clock, so when he turned so that every time I clicked on something it would beep at me, and after that about 7 beeps, it has completely turned off. After that, I could only a red light turns on (not flash, kind comes to stay at random) when I pressed the end button. So I left to go to school bored with my not-so-smart Blackberry smart phone. When I got back [about an hour and a half to 15:45], I tried to put it again, without success. Now, the only way I can get the red lights is to plug it into my computer. I can't do anything at all to activate it now. Just a long red light comes on until I have unplug my computer, and then it turns off. Can I have any advice on what to do? I can't afford to get a new one.

  Try to replace or use another battery to see if it boots. Liquid damage can be pretty funny, according to the water/liquid it could take weeks or months before the device falls down. The battery is almost always the first to go if it is wet.

• Error in MAP using PLINK.exe and PSCP.exe

  Working on a script in PowerCLI which allows me to audit security and re-concile ESXi from the security settings for all our guests. For the ESXi 'Message of the day' host, I check to see if the file ' / etc/issue "is filled with the warning banner I want and if it is not, copy the correct file. The problem is one of our environments has 20 + ESXi hosts on the same subnet. For some reason, some of the guests become ' pam_sm_authenticate: failed [error code: 40017] "and access denied when I try to run PSCP.exe and PLINK.exe. Firewalls between hosts and my script box is clean and its looks like the connection is made.  Anyone have an idea on why some hosts the same generation, config, FW rules and subnet would work for some but not others?

  -ESXi Var\log\auth error - "pam_sm_authenticate: failed [error code: 40017]."

  -Error PowerCLI\PowerShell;

  Connect to % IP % port 22 host

  Server version: SSH - 2.0 - OpenSSH_6.6.1

  Using the SSH version 2 Protocol

  We pretend that version: SSH - 2.0 - PuTTY_Release_0.61

  Diffie-Hellman group Exchange

  Make the exchange of keys Diffie-Hellman with SHA-256 hash

  Footprint of the host key is:

  SSH - rsa 2048 RSA KEY % %

  Detected-> server encryption AES-256 SDCTR customer

  Detected-> MAC Server algorithm HMAC-SHA1 customer

  Initialized AES-256 SDCTR Server-> client encryption

  HMAC-SHA1 Server detected-> client MAC algorithm

  Using the user name "root".

  ******************************************************************

  Message from the WARNING message % day\Banner %

  ******************************************************************

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Received disconnect message (Protocol error)

  Disconnect message text: too many failures for root authentication

  Server disconnect message has

  Type 2 (Protocol error):

  "Too many failures for root authentication."

  * PLINK and PSCP is part of the PuTTY application group. PLINK is to run the CLI and PSCP commands remotely, is to copy the files via SCP.

  Yes, all nodes have been running the same version.

  It seems that this could be a problem with the same or agents. We noticed while speaking with the support that only systems which were related to the area were affected. It turns out that if separate you them from the field and then stop the Service Active Directory, it will suddenly start working. Support is always trying to figure our why, as the error only we were what I mentioned in the previous announcement.

  LucD thanks for the reply.

• I want to allow users to update the table through Web pages, but not directly

  Hi guys,.
  
  I have a question. There is a Web page that people are going to and through that they get into stuff and delete stuff. Therefore, it must be select, insert, delete and update on the table. Because they can only do so via the buttons on the Web page, they are not able to remove the other stuff of users.
  However, nothing to prevent them from being able to connect via sqlplus say and removing stuff directly in the table. How to work around this problem?
  
  Thank you

  OracleGuy777 wrote:
  (1) for the joint account, everyone will still be need to know the password, Yes? Otherwise, how would they be able to connect? If they need the password, what is to prevent them from logging in via sqlplus using shared account and then delete stuff?

  N ° the password on behalf of shared database would not be known by users, it could just be stored on the server somewhere intermediate (intermediate level different servers have different options for storing secure passwords on the middle tier). Then create you users of the application (i.e. an array of USERS with a user_name and a hashed_password column) and do check this hash name & password of the user when the user tries to log on by your application.

  (2) Let's say I control access via a stored procedure and call it my request. users can still connect via sqlplus and call him too much, they don't? so removing the stuff?

  Yes, if your users have a data account, and this account has access EXECUTE on the stored procedure, they could connect through SQL * more and run it. If you gave them permission to delete a particular entity, however, why is - this important if they do it through your app through SQL * Plus, or via another utility? If you put the logic for change, to verify that the user is allowed to delete the particular line, etc. in the stored procedure, the audit security implications should not depend on the front end.

  Justin

• What scanning Security Audit software do you use?

  I am researching APEX security audit tools. I knew Enkitec eSert but looks like it is not available any longer. I also found ApexSec but few things. I searched here as well but see no real list of recommended tools to analyze your application / security vulnerabilities, so I ask myself the question in the case: that you use to perform security /vulnerability audits of your APEX Applications? Looking for idea is looking more far. Any input would be appreciated.

  Hello

  There are several tools that can help you (sorry if I missed it)

  ApexSec online is free - ApexSec Online

  The Adviser of the APEX - contains a few security checks

  The QA - QA - region-Plugin plugin

  The packaged integrated application "Application standards Tracker.

  eSERT - as you say, this seems to have been abandoned, links to the cloud version no longer works.

  Also advise and the ApexSec, the other two are a framework where you can insert your own SQL to query the metadata of the APEX for security issues. But you will need to provide the queries. Some controls are not difficult, such as the verification of all pages have session state protection, other controls are extremely difficult.

  I could tell several great things on ApexSec but I'm extremely biased so you should just try and draw your own conclusions.

  Hope this helps

• Can someone advise me on AVG Secure startup and file tree bloat remains removal search suggestions?

  Recently, I used the solution to https://support.mozilla.org/en-US/questions/927950?page=2#answer-364990 by KerriB. It worked. However, I still found traces of the bloatware in two other places. Not sure if I should remove them or not. Suggestions? I've included pictures of the locations (slightly rewritten for security reasons).

  We're in my startup programs. Access: Mouseover an open space on your desktop. Press the Windows key and the R key at the same time. A dialog box appears. Type msconfig. Click the Startup tab. It lists all the programs that start at startup. As you can see, ask VProtect and ROC_roc_ssl_v12 are listed as unknown manufacturer, but in the file tree, they are in C:\Program AVG safe search.

  The other location is accessible via start, then choosing computer, drive Local (c) (your local drive can be a different letter, obviously), Program Files. As you can see, there are a whole folder FILLED with elements of AVG safe Search.

  I have a support ticket open with AVG on this issue, but it is the weekend, I can not hear back for a few days. I'll let everyone know what they advise when back from them, I hear.

  UPDATE:

  I complained to AVG, and they offered me a free license for their 2012 AVG Premium paid... Security edition o.O... anyway, I wrote them back asking about the remains above and they responded by sending me a download of a special uninstall program (you have to install - go irony!). I have included a picture of this email (3).

  After running the uninstall program, I ran a cleaning of the system, and a deep cleaning run Advanced Systemcare (my favorite Cleanup utility), did a restart, then did a search for 'AVG '.

  As you can see (picture 4), I * STILL * had a folder filled with AVG, accessible by clicking on start, computer, C:\.

  I've done a shred secure deletion (again, and Advanced Systemcare tool, but simply to delete probably would be nice) this folder of AVG. Yet once, I ran a cleaning system, and a deep cleaning run Advanced Systemcare (my favorite Cleanup utility), did a restart, then did a search for 'AVG '. This time, nothing came. Great! right? No. I wanted to be * SURE * it was ALL gone, so I opened Windows Defender (the included firewall that comes with Windows 7), expanded the menu on the drives to be analyzed and down-and-this is, look, you know, a $AVG (image 5) HIDDEN folder!

  Now, I have to show all hidden folders to find. Which is done by clicking on start, control panel (change display by: small icons), Options records, (popup window), display tab, then check the selection dot next to "Show hidden files, folders and drives", apply, OK (see image 6 for description). Now go back to start, computer, C:\, and it should show the hidden $AVG folder. If that does not show it, you can also do a search and delete the search results folder. Yet ONCE, I ran a cleaning system, and a deep cleaning run Advanced Systemcare (my favorite Cleanup utility), did a restart, then did a search for 'AVG '.

  I feel now that I am completely free of AVG. I hope this helps you get rid of it too!

  3-6 images

• Audit failure Microsoft Windows security. 4625 login

  Passe spent Review Journal windows 2008 r2, that is windows 7 from two computers constantly try to start the session. I spent the antivirus, antispyware, malware, etc and detect any virus, Trojan horse, worm, on computers. You can help resolve makes these applications and how to eliminate.

  The port is changing from 50 to 65000. the log message attached

  Thank you

  Failure of 29/05/2013 audit audit 08:53:02 Microsoft Windows security. 4625 login

  Failure of 29/05/2013 audit audit 08:50:32 Microsoft Windows security. 4625 login

  Error on the login account.

  Object:

  Security ID: NULL SID

  Account name: -.

  Account domain: -.

  Logon ID: 0x0

  Logon type 3

  The typical error log:

  Security ID: NULL SID

  Account name: MARIA-PC $

  Account domain: VFM1

  Error information:

  Reason for the failure: unknown username or bad password

  Status: 0xc000006d

  Subreport: 0xc0000064

  Process information:

  Caller process ID: 0x0

  The name of the calling process: -.

  Information network:

  The workstation name: MARY-PC

  Source network address: 192.168.1.207

  Port: 50506

  Detailed authentication information:

  Logon process: NtLmSsp

  Authentication package: NTLM

  Transited Services: -.

  Package Name (NTLM only): -.

  Key length: 0

  Hi Javier,

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us updated on the status of the issue.

• I need to learn more about an event in the Security Audit log

  Here's an audit trail that we see.  I need to know more about this event and what it means.  This is a Windows 2003 server.

  In particular:

  -How do I determine who or what is: primary logon ID: (0x0, 0x3E7)

  -How to determine what work or article is the GUID: C:\WINDOWS\Tasks\User_Feed_Synchronization-{F9ACF166-98DF-45BB-8F33-86CB4DD8A279}.job

  Thank you.

  Event type: Success Audit

  Event source: security

  Event category: object access

  Event ID: 560

  Date: 18/06/2011

  Time: 22:14

  User: NT AUTHORITY\SYSTEM

  Computer: ABCWEBA04

  Description:

  Object open:

  Object server: security

  Object type: file

  Object name: C:\WINDOWS\Tasks\User_Feed_Synchronization-{F9ACF166-98DF-45BB-8F33-86CB4DD8A279}.job

  Manage IDS: 2828

  Operation ID: {0,1576635}

  Process ID: 876

  Image file name: C:\WINDOWS\system32\svchost.exe

  User principal name: ABCWEBA04$

  Main domain: ABCRX

  Primary login ID: (0x0, 0x3E7)

  Client user name: -.

  Client domain: -.

  Customer login ID: -.

  Access: READ_CONTROL

  SYNCHRONIZE

  WriteData (or AddFile)

  AppendData (or add subdirectory or create instance of channel)

  WriteEA

  ReadAttributes

  WriteAttributes

  Privileges: -.

  Restricted Sid Count: 0

  Access mask: 0 x 120196

  Hi Mike7211,

  The question you posted would be better suited in the TechNet Forums, resources for computer scientists. Please visit the link below to repost your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Thank you!

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• I have win 7 on the drive D and XP on drive C. I want to remove win 7 but it put all the stuff security of win7 on my XP (share security, audit, etc. If I remove win7 it will mess up to my XP

  I've updated TO WIN7 ON xp ON MY DRIVE c. DID NOT LIKE WIN7.  moved c DRIVE TO d c AND INSTALLED a NEW DISK WITH xp. Some HOW WIN 7 SECURITY (AUDIT, pARENT CHILD STUFF WOUND ON MY DISK C. xp etc if I REMOVE WIN 7 OF MY D DRIVE WILL IT SCREW UP MY XP ON c?) I'll be able to get the regular sharing XP back. I can't share all the files with my other calculation with all Win 7 security stuff.

  Hello Method 1: You can check the link below: How to use the backup utility to back up files and folders in Windows XP http://support.Microsoft.com/kb/308422 Method 2: You can check the link below: How to uninstall Windows 7 http://support.Microsoft.com/kb/971762 I hope this helps!