AE does not see my openGL graphics card

Similar Questions

• Latestes Update 14.1.2 does not recognize the iMac graphics card.

  Hello

  I've updated my PS - CC to 14.1.2 and now my graphics card is not recognized.  The problem was supposed to have resolved this update.  I have an iMac 27 inch end 2012 with 32 GB memory and 1 TB of hard drive.  My graphics card is NVIDIA GeForce GTX 512 MB of 660M.   When you start PS - CC after the update, I received a message that my graphics card was not recognized and I need to update the driver.  As you have known, only Apple has updates to the graphics driver.  There is NO update driver on Apple.  Checking my preferences I don't have the ability to Open GL now.  My driver works well with 14.1.1.  I'll try to retreat towards the 14.1.1 if possible.  Any help would be appreciated!

  Dennis

  Here's an update of the above.  Just by chance, I found an interesting solution.  I restarted my computer and then open PS - CC 14.1.2.  I received the same message... PS does not recognize that your graphics card for people with disabilities advanced display options.  Otherword, NO Open GL graphics.  So, I closed PC - CC and rebooted just to see what would happen and... I don't have the error message.  Check the Preferrrence, found my recognized graphics card and I have Open GL.  If for some reason, the first time you open PC - CC 14.1.2 with iMac, your graphics card will not recognize.  Just close and open again and you'll get him back.  Weird!  Adobe, please fix this for us users of iMac!

  Dennis

• HP 13 X 2 Split does not see the Micro HD card

  I got no problem with Micro HD card.  I use it to back up my work.  All suddenly the computer does "not see" it.  I tried to get out, but it does not "Spring".  Two part question, how do you remove and reinsert the card.  Usually, the map is to push and it comes out for the withdrawal.  Secondly, there is a setting that needs to be reset.  No changes have been made to the system.  The card just stop working.

  Windows 8.1

  Processor Processor Intet Core i3-4020Y @ 1.30 GHz

  Installed memory 4.00 GB

  Process system Type 64-bit x 64

  Pen and touch: Ful window Touch support with 10 points of contact

  Hey @Sugarwood ,

  Welcome to the HP Forums!

  If the card was already working the first thing that we should try is a system restore. A system restore back the PC to an earlier date without deleting your personal files. It will however updates to software and the driver of the room, uninstall any software recently installed after the date selected.

  Do to run a system restore, please see the following guide: use Microsoft System Restore (Windows 8). Try to restore to be for it started and let me know if it works.

  To remove the microSD card: you are right. Based on the microSD card should eject as if spring loaded.

  Thank you!

• HP 15-D103TX computer laptop problem: Windows does not detect the dedicated graphics card

  Hi all

  I recently bought a laptop HP 15 - D103TX , which is held responsible for Free on BACK. I have updated my Windows 8 operating system and have installed all the drivers from the HP website. The laptop has dedicated 2 GB Nvidia Geforce 820 M graphics card.

  But when I checked, I found that Windows displays the graphic memory dedicated only 0 MB.

  

  As you can see in the screenshot, it shows as 0MB dedicated graphics memory.

  Anyone can clear me, upward on this subject? Is it a driver problem, or what is Windows 8 going crazy.

  Thank you very much in advance!

  Kind regards

  Brahmnoor

  Okay, I found the solution. In fact, the Haswell Intel i5 processor that my 15 HP D103TX has also comes with an Intel 4600 GPU intregated. So when I do normal tasks, the GPU intregated works, so Windows does not display the NVIDIA GPU 820M, but when I play a game or doing intense graphics work, he switches to the NVIDIA one.

  In fact, it makes sense, because it preserves the battery of the laptop.

  Credit: found this solution on the NVIDIA support forums.

  https://forums.GeForce.com/default/topic/664986/GeForce-700-600-series/dedicated-memory-not-shown-/

• Illustrator does not detect the nvidia graphics card

  Hello

  I've installed illustrator cc 2015 on my Dell windows 8.1 and the laptop has 2 graphics cards one intel HD 5500 and another NVIDIA GeForce 845 M.

  Everytime I open illustrator I enjoy a massage that the software drivers for one or more cards are not updated to use the GPU performance update drivers software for later...

  I have my two cards to day and I already have the latest drivers for my windows 8.1.

  I tried to install the driver nvidia on the following link: https://helpx.adobe.com/illustrator/kb/illustrator-gpu-performance-driver-update.html - I downloaded the driver and when I tried to install it it tells me that the driver is not compatible with my system and I already have the latest version of the driver on my computer.

  When I opened the GPU performance in preferences I find that Illustrator only detects card intel and Nvidia not.

  The second problem is that the interface is a bit scary that the icons and text are zoomed in and very large (such as the attached screenshot)

  Please someone help me.

  M,

  I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  Here you can see the actual card requirements:

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  Try the solution kindly offered by Jason in post #67 here:

  https://forums.Adobe.com/message/8412738#8412738

• System does not boot after changing graphics card

  I'm under VMware ESXi 4.1 on HP xw8400 workstation. He worked well with HP Nvidia Quadro FX1400 graphics card, but after a while I became tired of all that noise and he changed his Asus Nvidia 7300LE. Now the system stucks on vfat successfully loaded.

  If I re - install the system with this another graphics card, it'll work?

  Strange that a simple graphics as blocked change the boot process.

  Maybe you order card PCI is also change.

  Simple, you can reinstall your host and then re-import the VMFS volumes.

  If you have local storage, make sure not to format the existing VMFS partition.

  André

• Internet does not work after changing graphics card.

  Hello

  I have a HP Pavilion HPE h8-1212 on windows 7 (64-bit) and I changed my graphics card for an AMD Radeon HD 7790 so like my case.

  after reboot and installation of my graphic card drivers, I noticed that I have yet 2 "Bluetooth devices" (bluetooth device) and I don't have a Wifi connection. I am currently connected to my internet via an Ethernet cable.

  Here are some screenshots of my problems:

  

  

  Please help me with this.

  The wifi card, if it's a minimap, as it is in the image, should have had two sons goes to the card wifi which were channelled through the case.  These were responsible for picking up the wifi signals to work.  Since the screenshot shows the weak or no signal, I suspect this is the question.

  

  As to describe the process of removing antennas, I couldn't find the following steps.

  Before you start: Remove the access panel, the collar, the higher optical drive and the upper bezel.

  1. Detach the antennas wireless the wireless LAN card.
  
  
  2. Cut the cable tie fixing connectors antenna for the front i/o cable harness.
  
  
  3. Pull the antenna cables without wire through the access hole in the upper part of the unit.
  
  
  4. Pick up each cable hooks fixing the top of the page of the PC.
  
  
  5. Detach the screws for each antenna.
  
  
  6. Pull the antennas of the unit off.

  In the end, it seems that the antennas are routed right under the top cover.

• Alienware Aurora r4 does not start with new graphics card.

  Hey,.

  I have an alienware aurora end of 2012 I believe.

  I currently have a series of 6800 AMD raedon graphics card, processor 3930 r9 k i7 and 8 GB of ram.

  I recently bought a MSI gtx 970 game to replace my old graphics card. I plug this card and it even lights up when I turn on the computer, but however my pc only happens to the start screen where I get the choice after pressing F2 and F12 and then freezes and I can't do anything. I then hear 3 beeps of inside my pc and then it proceeds to a blackscreen where my only choice is to turn it off manually.

  I tried to uppgrade my BIOS without much success (dident make it work), uninstall all graphics drivers from AMD, but nothing has changed.

  So I'm clueless I'm kinda a noob of the pc and have no idea what could cause this and would love help to explain what happens if all goes well if anyone knows a fix.

  THX in advance :)

  You you connected all power cables required PCIe 970? They are probably different config as AMD-6800. You should have 875w PS, but you might need to check that.

  Probably should have uninstalled AMD Driver Suite (catalyst) before removing the card from AMD.

  If card MSI BIOS a double switch, you can try another position.

  Try Mode Windows safe.

  What operating system do you use? Are you running the UEFI BIOS or legacy Mode?

• ESX4i does not see the RAID controller card

  I install the ESX4 and the ESXi4. Considering that ESX sess card RAID controller, ESXi4 will not work. I was wondering if there was a solution to this?

  Memory I don't remember ESXi4 support adding additional drivers (unlike ESX4 Installer) but I was wondering if I climbed to U1 ESX4i, that would help. Or is just "not supported"?

  Concerning

  Mike Landry

  www.RTFM-Ed.co.uk

  My problem has been resolved by the way of the ESXi 4.0 to ESXi 4.0 Update 1... which includes a driver update...

  I managed to ESXi in order to run from a USB key on the servers, but found the previous day, and DPM mode did not work properley. While he was going to suspend the ESX box very well, the machine just and seems to lose its settings to boot PXE boot - regardless of what I did with the BIOS...

  I found ESX4i U1 to install on the physical disk is more reliable...

  Concerning

  Mike

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!

• RALink RT3290 does not "see" the 5 GHz networks (802.11n)

  I just bought a HP Pavilion 17 Notebook PC (number of product F9M00UAR #ABA) with victory 8.1 x 64 installed and the wireless card does not 'see' any 802.11n networks.  The driver installed is 5.0.37.0 with a date of 25/11/2013.

  I've seen problems with upgrades to 8.1 affecting the adapter, but nothing works not properly out of the box on a new machine from 8.1 to WIN.  Can anyone offer any suggestions on how to force it to see 802.11n?

  Thank you

  Mark

  Hello:

  The WLAN RT3290 card is only a single band (2.4 GHz).  He can not find the 5.0 GHz band.

  Whenever you see a suffix of bgn on a description of the wireless card, it means that it is a map only single band (2.4 GHz).

  Cards N whose suffixes ending with abgn or agn wireless dual band (2.4 GHz/5.0 GHz).

• XP mode does not recognize my 6023E PCI card

  I bought a new Win 7 with a PCI slot inherited to execute an OLD NI PCI-6023E card I used for years.  I downloaded the drviers legacy NOR (7.4), but he does not see the card.  When I look in Win 7 the card is there but I can't run the 64-bit drivers testament and with my old software (C++).   I have connected a NI USB-6008 card and was able to open the card in XP mode... any ideas?

  Unfortunately, XP mode does not work with the PCI/PCIe devices, only those USB. Most (all?) programs virtualization will have this limitation.

  As you probably expected, the General recommendation is to migrate to the API OR-DAQmx for your application if you want to that support on Windows 7.

  If this is not possible, then there is a section of the knowledge base on a Beta OR-DAQ traditional (old) for Windows Vista and 7 , who might be interested. At a minimum, it will take allows you to use a 32-bit installation of Windows 7, not a 64 bit.