AE frustrates me a lot on a Dual Xeon. Need help.

Hello

I just got a new laptop to work intensively on After Effects CS5:

-Dual Xeon X 5680
-36 GB of ram

-1 SSD win 7 pro 64

-2 x data Raid0 / data.

The first thing I did was to start a project, I had made on my old computer and which took 5 hours of renders.

So, I put the MP, 3 GB on the left for the other application and define 24x1Go (for each wire). Render. OMG. Estimated time: 7 minutes left...

Taskbar so-called business 100% cpu, and almost 20-33 GB of ram occupation.

And then all of a sudden, after as... a quarter of the coating is done, the company estimated just 5% cpu, Ram business of maybe 5 GB and door to more than 3 hours of estimated time.

I abort rendering and, surprise, some sort of error saying popup:

"After effects warning: a framework did not then only with the help of render multiple images at the same time." Allocate more memory to the memory & multiprocessing preferences background process may fix this problem. (26:: 142)"

Yes, I did. A renewed. And Yes... He did more than 20 images.

I tried a lot of ADJUSTMENT. Nothing is resolved.

Then I started "Googling" and found this:

"Note: . Cache when the memory (the RAM available for the storage of executives of RAM Preview) is almost full, the background process cease rendering and enter a State of low memory consumptionand the foreground process will start made - as if made simultaneously of several executives had been arrested. "This means that the rendering of a RAM preview will fast at the beginning, then will leave speed like rendering passes to a single core processor. here

The thing is:
-J' have on everything & set the folder cache, active disk cache is Max (500000 MB), and it is not serious.
-If I run my render, interrupted when he falls down and re-launch, where it ended, again and again, I do in my rendering as set of 10 minutes

MY QUESTIONS ARE:

-Are there a way to set the amount of memory Cache?

-Is it possible to purge automatically?

-Am I forced to stay along my computer to watch-demolition/raise my renders to take advantage of my configuration?

If the answer is NO, NO, YES, well, are engineers/leader adobe dumbs projects? Because it will be a shame BASS to deliver such a no -professional solution.


- And, agree, in the worst case, because my computer has 2 x 6 hearts and the fact that AE recognize 24 sons, the quantity of memory should I expect to avoid this *?

Thanks for the reading and advice.

So, it's all synthetic? In this case, you should have no problem. However, since you mention 2 individual, you see a normal state due to particles more wher being gnerated, he eats all your memory. This would especially be true - no pun intended - with particles due to their characteristics of shading and possibly temporal sampling of clips accumulate a large amount of custom data. I would look into that.

Mylenium

Tags: After Effects

Similar Questions

  • Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

    Hello

    I have a question about the HP Z620 workstation.

    recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

    as I can't find any other power to use nor on the power connector

    or nowhere on the set, I wonder how a graphics card must be powered only

    needs

    1 x 8-pin

    or

    1 x 8-pin + 6 pins

    or

    2 x 8 pin?

    I know there are some discussions about this in this forum, but I did not understand

    the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

    But how is that possible?

    like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

    so plug any adapter, 1x6pin for graphics cards that need much more power would be

    According to the standard / danger, right?

    and what about graphical installation double?

    would be happy if someone around could help me with this.

    best regards

    Chris

    The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

    The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

    These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

    This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

    http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

  • The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

    The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

    Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a product used by corporations long dead, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (Please check your invoice, as Adobe have a lot of similar products), and we may be able to direct you. Good luck!

  • Our firewall blocks a lot of sites and I need to know the ip address in photoshop and adobe illustrator activation

    Hello

    Our firewall blocks a lot of sites and I need to know the IP address to activate the photoshop and illustrator. (Inicio sesion Errores, activacion o conexion |) CS5.5 y posterior, Acrobat DC)

    Thank you very much

    Combinations of Adobe host Ports for installation, activation and updates.

  • Hi, I do not know why the moment I try to buy a package of software for my business, I can't go any further because I can't select my country (ITALY-EURO) COSTA RICA control value is selected automatically. I need help. A lot of satisfaction

    Hi, I do not know why the moment I try to buy a package of software for my business, I can't go any further because I can't select my country (ITALY-EURO) COSTA RICA control value is selected automatically. I need help. A lot of satisfaction

    Contact Adobe Support when available (usually not weekends)...

    Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this. Thanks a lot for helping me, Roland

    Hi Mr President, last week I have a crash on my computer. Yesterday I installed PSE12... but I can't open the program, please I need help/support for this.

    Wath can I do?

    In the box: PN 65224809, product key 1057 -.

    Please can you tell me wath is you solution?

    Thanks a lot for helping me

    Best regards, Roland Cuypers

    [email protected]

    Post edited by: Sandeep Singh removing serial number

    Hi rolandc65772962,

    Sorry for the inconvenience. Please provide us with the complete error message you get.

    Kind regards

    Sandeep

  • Reference Dell sc1495 dual Xeon 3.0Ghz cannot install x 64 guest OS

    I have a x 64 dual Xeon 3.0 Ghz processors with 16 GB of RAM. I need to install both server guests OpenSuse 10.3 x 64 because it will consolidate two of my machines into one. I get a nice little message from Installer app saying I use a 32-bit hardware. I made sure the BIOS EM64T reports. Just for fun, I have tried to run the Intall in Windows Server 2008 x 64, same message "trying to install 64 bit on 32-bit operating system". Is there a possible setting that I missed setting to the top of my host ESXi 4 or are my processors just not compatiable with ESXi 4?

    Enable VT in the server BIOS.

    ---

    VMware vExpert 2009

    http://blog.vadmin.ru

  • Sandy Bridge Dual - Xeon better?

    Hello

    I was wondering,

    Is a workstation dual xeon that much of a gain of performance with 16/32 (if available) of RAM as an i7 2600 k with overclock?

    Xeons may be 5 percent performance gain?

    (All with the same configuration of hard disk, video card, etc.: 8 X samsung f3 1 TB raid 5 with raid controller intel, gtx590, vertex3 ssd)

    Thank you

    Sebastian

    Sebastian,

    A 8 5 disks raid equipped with a controller Intel is an excellent choice, but the disadvantage is that it requires a PCIe 8 x slot and due to the architecture of P67 motherboards, this also means that the video card slot is then downgraded a PCIe 16 x slot on the PCIe 8 x slot, which reduces video performance. If it's something to worry about you must decide for yourself.

    It simply means:

    1 accept the loss of video performance. Rumors say that the loss is not really important, although I've heard others say it's huge. (This Sander of the results which show with PCIe 16 x 5 seconds and 10 seconds with PCIe-8 x on the rendering test). In my book, it is indeed huge.

    or

    2. decide on another platform, such as X 58 and a 970/980/990 CPU. This will give you better performance.

  • Dual Xeon 6-core editing Workstation (criticism/Suggestions)

    Hello

    I was responsible for assembling or buying a new video editing station capable of injesting HD uncompressed glad of our studio 3 photo, "sweetening" (correction of color, audio settings, etc.), grouping in pre-made and made on several broadcast formats [b] in less than 12 hours [b] animations and 2D graphics.  The system would normally only be dealing with only one live stream (dial-up).  Content length is 40 minutes to 1 hour.

    I want to order the parts for this system on Friday. My budget ceiling (for hardware) is 5000 USD (I am currently $ 50 on).  I don't 'plan' to overclock (I don't own the test bench), but could review six months out or almost (once the system worked stable for awhile).

    Software used (CS5 all in order of use): Premiere Pro, After Effects, Photoshop, still, Soundbooth, Illustrator, InDesign, bridge.

    Operating system: Win7 Ultimate 64.

    Here is the list of the components that I am looking at:

    (2) X 5650 of the Intel Xeon Westmere 2.66 GHz, 12 MB L3 Cache processor Six hearts LGA 1366 95W $2039,98
    http://www.Newegg.com/product/prod [...]  6819117231

    SUPERMICRO MBD-X8DAH +-F-O double LGA 1366 Intel 5520 Extended ATX Intel Dual Xeon Motherboard $499.99
    http://www.Newegg.com/product/prod [...]  6813182177

    COOLER MASTER COSMOS 1000 RC-1000-KSN1-GP-Black / Silver steel ATX full Tower computer case $169.99....................
    http://www.Newegg.com/product/prod [...]  6811119138

    Western Digital VelociRaptor WD1500HLFS 150 GB 10000 RPM 16 MB Cache SATA 3.0 Gb/s 3.5 "HDD $149.99 nu
    http://www.Newegg.com/product/prod [...]  6822136296

    (3) western Digital Caviar Black WD6401AALS 640 GB 7200 RPM 32 MB Cache SATA 3.0 Gb / s 3.5 "HDD $224,97 nu
    http://www.Newegg.com/product/prod [...]  6822136319

    SILVERSTONE ST85F-P 850W ATX 12V v2.3 / EPS 12V 80 PLUS SILVER Certified PFC modular active Pwr Sply $149.99
    http://www.Newegg.com/product/prod [...]  6817256058

    (2) radiator CPU SUPERMICRO SNK-P0040AP4 & Xeon processor 5500 Series $ 59.98 cooling fan
    http://www.Newegg.com/product/prod [...]  6816101285

    015-P3-1482-AR of EVGA GeForce GTX 480 (Fermi) SuperClocked 1536 MB GDDR5 384 bits $522,99
    http://www.Newegg.com/product/prod [...]  6814130551

    ASUS DRW-24B1ST/BLK/B/AS black 24 X SATA DVD burner - in bulk - OEM $21.99
    http://www.Newegg.com/product/prod [...]  6827135204

    LG Black 10 X Blu - ray burner - Support of LightScribe SATA model WH10LS30 in bulk - OEM $139.99
    http://www.Newegg.com/product/prod [...]  6827136181

    SYBA PCI - Express FireWire 1394 card model SD-PEX-FWB $42.99
    http://www.Newegg.com/product/prod [...]  6815124050

    OCZ Platinum Tricanale 12 GB memory PC10666 DDR3 - 1333 MHz, 12288MB (6 x 2 048 MB), CL7 $346,99
    http://www.TigerDirect.com/applica [...]  60767110 2

    (2) NEC EA231WMI-BK 23 inch Ws LCD 1920 X 1080 1000: 1 VGA 14MS black monitor $679,98
    http://www.Amazon.com/GP/product/B [...]  JGJ0JKT8F1

    Subtotal $5049,82 (without software)

    ADDITIONAL COMMENTS:
    I'm a little worried about the compatibility of the heatsink of heat/mobo/processor/carton.   Also looking for ways to cut without compromising the above calendar.  I spent a bit of time to research on these pieces.  I'm looking at those more warned for pointer on all conflicts, as well as any "Hey, you forgot X." Other component suggestions are also welcome, but wave 'their best' reasoning carry no weight.

    OTHER EQUIPMENT on site:
    Blackmagic Multibridge Pro (for interfacing with studio) PCI-E x 4 break out box
    16 TB (max, currently 2 TB mirrored) NAS for archiving of video media (connected via dual-port ethernet10/100/1000)
    Multiple monitors to NTSC calibrated CRT and large format LCD control

    Thank you in advance,

    Jim G

    A couple of notes:

    • I have not yet selected a heat sink.  Unlike the Xeons, I believe the i7s come with a storage unit but I probably want an active receiver.

    Noctua NH - D14.

    • I'm debating between the above discs and these 1 TB Samsung Spinpoints which seem to be the default suggestion and are a little cheaper ($80 vs 100 $US).  Thoughts on 6 GB vs 3Gb sata connection or 32 MB vs 64 MB cache?

    Samsung Spinpoints have fewer problems with raid, due the WDTLER utility configurations that Caviar Balcks come with.

    • I couldn't bite the bullet on ram 6x4Go. $ 1200 USD (for a stick of six corresponding defined as prejudice suggested) it costs 3 times more than 6x2Go.

    24GO is really expensive, and I have the same feelings as you. I would stick with 12 for now.

    • Some reviews say that this motherboard spacing is tight, especially when you try to fill all memory and pci 16 x slot machines.  Is the kind of thing that I have a hard time to visualize well so if there's someone who likes / is good verification of clearances do not hesitate.  The additional component only would be an adapter pci x 4 for our BlackMagic Multibridge which is just an adapter external slot.

    Here are some pictures of my systems as well as the intestines, so you can judge for yourself if is is a tight fit. Mind you, my system is filled with 17 discs HARD and two burners for BR.

    14 discs at the front and 3 in the back.

    Additional 25 cm in the side panel fan.

    Sufficient margin to 6 sticks.

    No problem with space.

    NVIDIA GTX 480 and Areca ARC-1680-iX-12 installed, with an extra fan on the power supply for the additional cooling of the two cards PCIe.

    Only a limited some of my discs (there are 14 of them closely mounted) and no problem with temperatures. But I have fans for each disk cage.

  • Need help with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics

    I recently bought the 15z-j000 ENVY and updated with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics. I wanted the dedicated HD 8750 M for games and whatnot. When I opened first to the top of my new laptop, I did a clean install of Windows 8 from a USB key. This completely erased all of the HP preinstalld drivers, software, etc.

    I installed the beta drivers for my laptop from the site Web of AMD.  Here's my problem. How will I know that my dedicated video card working properly? I ran a few games and they seemed to do as well. But when I checked my system with CPUz and dxdialog it says that I was running the graphics card integrated. How does the dual graphics and how can I make sure I take advantage of my dedicated card. An explanation of the depth and how for the use of the AMD solution dual graphics card would be apprechiated.

    I'm no expert on the switchable graphics, but you find the answers to your questions in the Overview of the switchable graphics or Dual GPU or switchable on portable graphics equipped with double GPUS and AMD.  Be forewarned however, documents were written for the HP PC using the appropriate HP, drivers if you use the Beta from AMD drivers, then documents may not match what you see on your system.

    R

  • Frustration of Windows Update... need help

    I am trying to help my sister with the speed of his laptop computer.  It is an Acer Aspire 5570-2792.  He had become so slow that it took 10 minutes to start and enter fully into the Vista environment.  Finally, I ran the utility which formats the hard drive and restores the computer to the State nine factory, with Windows Vista Home Basic as the operating system.  After doing this, the fantastic ran computer with no problems at all.  It fully charged in about 1 minute Windows and programs such as Internet Explorer load into memory and ran as fast as 15 seconds.  Not bad at all.  However, when the updates of Windows started coming in (83 in total), they have installed (for about 14 hours, even on a DSL connection, to download), the computer is now just back to where it was before and perhaps worse.  It takes 10 to 15 minutes to start under Vista, and it takes more than 2 minutes for Internet Explorer start.  It's frustrating and absolutely unacceptable.  Please help... What can I do to run as if he had not all of these updates it slows it drastically this computer.  Please... it's just awful.

    Look at the sites of the manufacturer for drivers manually
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    You can also be linked to the updated find and install older drivers too, so leave on UPDATES and turn off you looking for drivers.

    How to disable automatic driver Installation in Windows Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

  • Acer Travelmate 7750 G freezes completely using Windows or Linux (dual boot). Need help please.

    The problem is that the machine freezes completely without apparent reason, on all operating systems, I tried.  "Freezes", I mean there is no reaction to the mouse movements, keyboard presses and start button / stop pressed off the coast.  The gel seems to be at a random time and may occur even when the system is idle.

    The Acer Travelmate 7750 G laptop came pre-installed with Windows 7 and it kept freezing.  The machine has been updated level of Windows 8, 8.1, 10, then dual boot with Linux Mint 17.3.  The machine froze on all operating systems.  I have tested software hard drive, memory, CPU, GPU and they all managed very well.  Is it someone who has knowledge about how to resolve or others troubleshoot this please?

    RESOLVED - I installed a HDD replacement in December 2015 and the laptop Travelmate 7750 G works perfectly since.  Cost me almost nothing compared to the price of the laptop.  No freezing, crashing or anything else!

    Thank you very much for your help.

  • Need help to start in Windows 7 after installation of Windows XP in dual boot!

    Well, I had a Windows 7 system with a partition C: and D:... Windows 7 is on C: and no OS was on D:... I then installed Windows XP in D:... Now when I start my computer, I go directly under Windows XP... How can I get instead a the operating system boot menu is displayed at startup, I can choose which OS to start?

    Hello

    See the article below which might help you to fix this problem.

    Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration
    http://support.Microsoft.com/kb/919529

  • I need help, its frustrating me! network discovery does not illuminate.

    my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

    Hello

    Did you change your computer?

    Method 1:

    Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

    Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
    1. click on start, type firewall and then click Windows Firewall with advanced security.
    2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
    3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
    4. apply the changes and check the result.

    For more information about network discovery, see this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

    Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
    1. Click Start, type services.msc and press to enter.
    2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
    3. change the startup type to automatic and start the service.
    4. apply the changes.

    Method 2:

    Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

    Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

    To turn on network discovery

    1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

    2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    I also suggest you turn on discovery of the network link and check.

    Enable or disable network discovery

    http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

    See also:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  • Comparison of dual Xeon systems - worth the price difference?

    I am looking at two different processors and ask about them.

    I consider dual Intel® Xeon® Processor-E5-2699 v4 (22 hearts to 2.2 GHz) and double Intel® Xeon® Processor-E5-2687W v4 (12 cores at 3.0 GHz).

    The total overall GHz is no longer with the 44 base against the system of 24 base system, but the core clock speed is significantly higher in the 24 base 44 core system vs System.

    That would be better - faster speed single or more overall GHz? What's a better way to playback and editing of speed compared to the other for rendering/encoding/export?

    Your E5-2699 v4 with option 22 carrots (total 44 hearts and 88 discussions) is a loser as first is limited by Microsoft to 64 threads software so the second processor must be turned off or hyperthreading diasbled

Maybe you are looking for

  • Book Pro 4510 s: graphics drivers works don't not use windows 10, 32-bit

    HIE am now using windows 32-bit, Windows 7 10, the name of my laptop is pro book 4510 s its a 1.9 gig, have the problem is just that my graphics driver works not because they are very old. Please how to download or upgrade the graphics driver

  • Turn off connection at the start of the VI

    Hello When you start VI adverse action occurs - polarization [i] value is stored in flip-flop (please, see the screenshot below). There are some tecjnique, that allow to disable a connection (red on the screenshot) for a few moments at the start of V

  • Get the activation error message during playback of FSX

    Hi my computer dident throughout the game, but I had already laid off he then tried on a 2nd computer and it still dident work so I tried on a computer really and it worked, but now it doesent let me license it please help me! 1

  • Chicony USB 2.0 Camera disconnected?

    I have Toshiba A305 and my camera has suddenly stopped working. At first, I thought that it was the driver but I updated the driver and now it says that the device is disconnected! How to plug in a built in camera? I've seen a lot of articles that sa

  • Philips SHB5600 Bluetooth can pair with Windows 7

    Hello I tried for hours to pair my headset with my Windows 7 Dell Desktop (Philips SHB5600). However, whenever I try to add the bluetooth device, it does not my headphones (which is couple-mode). All the drivers are installed (see photo) and I have a