AEGP_ObjectType_VECTOR and access to the path of control points

Similar Questions

• Access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.

  Someone at - it an idea of this error message: [access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.]

  This happens only if I "User Account Control" is enabled in the administrator account.

  Hi GA,.

  Is the default Administrator account or an account that you created?

  Method 1:

  You can try creating another account with admin rights and see if that solves it.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Method 2:

  Also, if this problem just started, then try to perform a system restore, and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

• Access to the path is denied

  Hey, I tried to open this file, but I got this error...

  The exception text *.
  System.UnauthorizedAccessException: Access to the path 'C:\String.wz' is denied.
  at System.IO.__Error.WinIOError (Int32 errorCode, String maybeFullPath)
  at System.IO.FileStream.Init (String path, mode FileMode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, bufferSize Int32, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
  at System.IO.FileStream... ctor (String path, FileMode mode, FileAccess access, FileShare share)
  to System.IO.File.Open (String path, FileMode mode)
  at WzLib.WzFile.ParseMainWzDirectory)
  at WzLib.WzFile.ParseWzFile)
  at Decrypt.MainForm.load_file (String path)
  at Decrypt.MainForm.button1_Click (Object sender, EventArgs e)
  at System.Windows.Forms.ToolStripItem.RaiseEvent (Object key, EventArgs e)
  to System.Windows.Forms.ToolStripMenuItem.OnClick (ByVal e As EventArgs)
  to System.Windows.Forms.ToolStripItem.HandleClick (ByVal e As EventArgs)
  at System.Windows.Forms.ToolStripItem.HandleMouseUp (MouseEventArgs e)
  at System.Windows.Forms.ToolStripItem.FireEventInteractive (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStripItem.FireEvent (EventArgs e, ToolStripItemEventType met)
  at System.Windows.Forms.ToolStrip.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.ToolStripDropDown.OnMouseUp (MouseEventArgs mea)
  at System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ToolStrip.WndProc (Message & m)
  at System.Windows.Forms.ToolStripDropDown.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  WzRepacker
  Assembly version: 2.1.0.0
  Win32 version: 2.1.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzRepacker.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5491 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  WzLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Users/Alvin/Desktop/modified%20harepacker%20 (final) WzLib.DLL
  ----------------------------------------
  Microsoft.DirectX.AudioVideoPlayback
  Assembly version: 1.0.2902.0
  Win32 version: 5.04.00.2904
  Code: file:///C:/Windows/assembly/GAC/Microsoft.DirectX.AudioVideoPlayback/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.AudioVideoPlayback.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5483 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5485 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Now I use the other program to open the file, it shows this error

  Error initializing the String.wz (Non-negative number required. Parameter name: County). Check that the directory is valid and the file is not in use.

  This is an application-specific error. It has nothing to do with Windows. You should check with the supplier of this 'another program '.

• Access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.

  Original title: Hi I have a problem of AceEventlog of program data, access is denied for the CCC, I guess anyway I'll post the log.

  I've updated the drivers recently CCC 10.8 and now I have a bunch of papers in the journal of AceEvent, any help would be great. Log name: ACEEventLog
  Source: ACEEventLogSource
  Date: 2010-09-12 12:45:46
  Event ID: 0
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: SavannahMick-PC
  Description:
  0000000241: 2010-09-12 12:45:46:281 Exception: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
  Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
  ************************************************************************************************************************

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      0
      4
      0
      0 x 80000000000000
     
      10312
      ACEEventLog
      SavannahMick-PC
     
   
   
      0000000241: 2010-09-12 12:45:46:281 Exception < save the Xml Document >: access to the path 'C:\ProgramData\ATI\ACE\Profiles.xml' is denied.
  Called by exception: ATI. ACE. APM. ProcessID:03780 threadID :) server. XmlDocumentSaver::SaverWorker domain name::(APM.) assemblyName (CCC.exe) Server, Version = 2.0.3867.36565, Culture = neutral, PublicKeyToken = 90ba9c70f846762e)
  ************************************************************************************************************************
  
   
  

  Hi SavannahMick,

  The entries refer to the drivers/files associated with the ATI. There are some useful suggestions in the forum link below. See if one of them works for you.

  Thousands of events ati2mtag 62464 s (DVD_OV UVD Information) in the system event log

  The CCC does not open after 10.8

  Catalyst Control Center (CCC.exe and MOM.exe) keep quit

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error database that can be updated windows found 0 x 80070490. access to the path "C:\windows\softwaredistribution" is denied. »

  Original title: error in database that can be updated windows found 0 x 80070490

  When you try to repair windows update on my rt surface I get the following error message - "error in database that can be updated windows found 0 x 80070490.  repair windows update the database, access to the path "C:\windows\softwaredistribution" is denied. "Any help?

  Hello

  Welcome to the Microsoft community.

  It seems that you are facing problems trying to fix Windows update. We're here to help. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. Why are you trying to repair Windows update? Are you facing problems during the installation of the updates?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest you follow these steps to run the Windows update Troubleshooter:

  a. open Control Panel.

  b. click on Troubleshooting.

  c. click show all in the left pane of the screen.

  d. in the list of options, click Windows update.

  e. click Next and follow the on-screen instructions.

  Method 2:

  I suggest to refer to the article and try to run the system update readiness tool:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• System.UnauthorizedAccessException: Access to the path '[Namespace.InstallState]' is denied.

  Hello

  We have a Windows Service project that was developed using Visual Studio 2008.  After you build the project successfully, we used the installutil.exe to install the program as a NT service on a Windows Server 2003 R2 server. (Referring to the steps in the article: creating a Windows Service Application). It works very well.

  Now, we are upgrading to a Windows Server 2008 R2 Datacenter server. When I followed the same step to set up the NT service on the new server I got a message: System.UnauthorizedAccessException: access to the path 'C:\inetpub\wwwroot\_uat\WindowsService\bin\Debug\WindowsService.InstallState' is denied. I checked the permissions on the _uat folder are identical to what is on the old server. I have came across this article (kb946503) that describes the similar problem, but on the remote computer to install (I am running the installutil.exe locally on the new server). Anyone know how to fix this?

  Victor Zhang

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• manage all folios and access all the Analytics

  Hello and happy new year

  We have an urgent question about dps:

  We create an adobe id different for each application we build.

  by downloading folios associated with a certain app to the folio Builder we need to connect with this specific adobe ID?

  or can we use 1 adobe ID to manage all folios for all applications.

  which is the best way to go, in the long term to manage all folios and access all the Analytics.

  Please let us know as soon as possible.

  Ediz

  one account per app. Yes, you have to identify you with this Adobe ID to create content for this App. unless you intend to create application kiosk (one that shows all folios of all content), this is the right approach.

• access to the path of QML

  Hi, how to access the path an audio or image QML file and send it to the CPP file for further processing.

  In fact, I'm looking for the code that retrieves the filepath and filename information when the "onTriggered" handler is called when the user clicks on the file.

  Thanks for the help.

  or you can also try:
  give IDs for ListView listView

  _mycode. FileInfo (listView.datamodel.Data (listView.Selected ()). URL)

• Political dynamic VPN access and access to the administration

  Hi all

  I'm testing a scenerio with an ASA 5520 so he could authenticate VPN users against and an environment Active Directory more access to management as well. I created a dynamic access on the ASA policy indicating that, if you are a member of the Active Directory 'Managment' group continue. I have chagned the DefaultAccessPolicy to "Finish." With it, users could not connect VPN because they are not a member of this group, but access to manage the ASA is allowed due to this policy.

  Is there a way through the use of dynamic access policies I can afford access to the administration (SSH, AMPS, etc.) by matching to membership in a group and will allow normal users to VPN in successfully, but not give them access to the management of the ASA?

  I just try this but it seems that I should be able to swing that?

  Thaks in advance.

  Hello

  You can try to apply the DAP and configure the filter ACL network. allowing only the protocols you want to that they can access.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• How can I change the login email address and access to the features of Windows 8?

  Original title: I accidentally entered a wrong email across to the top of the upgrade to windows 8 and now I can't access all the features of windows 8.

  When you install the upgrade for windows 8 he asked for my email address.  I misspelled my domain name, which causes it have instructions or messages will in the vast desert of never never land.  I need to check my email to make the apps work, but given that the email is valid I can't do that.  I need to know how to change the login email address in windows 8 so that I can go ahead and verify my account.

  Hi I also had this problem but I have used the local account and was able to access all applications with my correct email. I hope this helps!

• Text-Animation: my text is under the path and not on the path (for some reason any)

  Hello

  I use after effects CC (12.2.1) on Mac Book Pro El Capitan 2013.

  I'm not able to put text on a path for animating text. It will always appear in the path. I asked different people and I never received a response, because it seems I'm the only person who has this problem.  I don't need to write much more, because it's really as simple as that. My screenshot will show my dilemma and I have not made any changes to attributes.

  Please take a look and hopefully help me with this.

  (larger image here: http://postimg.org/image/x4xj8duqz/)

  

  Anyway, I know now what happened. If you have a text in a bounding box, it aligns in the path. I discovered this quite by accident.

  Thanks for the help.

  See you soon.

• How to make part of a lower path and part of the path to be superior to another object?

  Hello! I have a figure like below:

  

  You can see the red circles intersect the blue two times each. One of them crosses (the bottom one) must be below the blue circle, while the other must be above the blue circle. How can I get there? Can I use the generator forming sort tool?

  I'm pretty much a beginner using illustrator so if it is possible to explain simply, please do.

  ekmanch

  There is no way real go one way both on and under a different path, so you usually simply cut where you want that to happen.

• Storage and access to the values of the pageFlowScope at the bean

  Using JDeveloper 11.1.1.4.0
  
  Hi again,
  I read somewhere that store parameter values in a bean is a good practice, now I wonder. I did this and 'declared' this bean to my workflow bounded as pageFlowScope. Now, I need to access the values in another bean "method (scope of application) and cannot get them." If I would have just used EL #{pageFlowScope.variable1} I know how access (as in my code below), but since they are in a bean I can't find the right way to retrieve the values. Is it possible and how?
  

      <managed-bean id="__3">
        <managed-bean-name id="__2">ViewAmtsParameters</managed-bean-name>
        <managed-bean-class>tax.viewamtsowedtreetbl.view.ViewAmtsParameters</managed-bean-class>
        <managed-bean-scope id="__4">pageFlow</managed-bean-scope>
      </managed-bean>
  
      // Get access to the adf faces context for page flow scope
      AdfFacesContext adfctx = null;
      adfctx = AdfFacesContext.getCurrentInstance();
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding =
          bindings.getOperationBinding("ExecuteWithParams");
      // Set the parameters for the query
      operationBinding.getParamsMap().put("cid",
                                          adfctx.getPageFlowScope().get("ViewAmtsParameters.clientIdParam"));
      operationBinding.getParamsMap().put("can",
                                          adfctx.getPageFlowScope().get("ViewAmtsParameters.canParam"));
      operationBinding.getParamsMap().put("asofdate", newValue);
      System.out.printf("first execute parms  %s   %s      %s \n",
                        operationBinding.getParamsMap().get("cid"),  -- returned null
                        operationBinding.getParamsMap().get("can"), -- returned null
                        operationBinding.getParamsMap().get("asofdate"));

  I also tried to use accessors of the bean of the pageFlowScope, which gives me an error indicating that the access is forbidden.
  
  Thanks again in advance.
  Troy

  "" "You're almost there. '" You cannot directly access the bean inside bean attributes. The pageFlowScope card allows you to access the bean itself. Once you have the bean, you can use their getter to get the attributes.
  Or you use the EL (as you use it on the page) and evaluate it for the value:

  
  public static Object resolveExpression(String expression)
      {
          try
          {
              FacesContext facesContext = FacesContext.getCurrentInstance();
              Application app = facesContext.getApplication();
              ExpressionFactory elFactory = app.getExpressionFactory();
              ELContext elContext = facesContext.getELContext();
              ValueExpression valueExp =
                  elFactory.createValueExpression(elContext, expression, Object.class);
              return valueExp.getValue(elContext);
          }
          catch (Exception e)
          {
              e.printStackTrace();
          }
          return null;
      }
  
  public void YOURMETHOD()
  {
      AdfFacesContext adfctx = null;
      adfctx = AdfFacesContext.getCurrentInstance();
  
      Map pageParams = adfctx.getPageFlowScope();
      // assuming the class of your bean class is ViewAmtsParametersBean and the name you've given the bean is "ViewAmtsParameters"
      ViewAmtsParametersBean parambean = (ViewAmtsParametersBean) pageParams .get("ViewAmtsParameters");
  
      //an other way to access the bean attributes is to use EL
      String strIdParam = (String) resolveExpression("#{pageFlowScope.ViewAmtsParameters.clientIdParam}");
  
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding =
          bindings.getOperationBinding("ExecuteWithParams");
  
      // Set the parameter for the query
      operationBinding.getParamsMap().put("cid", parambean.getClientIdParam());
      operationBinding.getParamsMap().put("can", parambean.getCanParam());
  
      operationBinding.getParamsMap().put("asofdate", newValue);
      System.out.printf("first execute parms  %s   %s      %s \n",
                        operationBinding.getParamsMap().get("cid"),
                        operationBinding.getParamsMap().get("can"),
                        operationBinding.getParamsMap().get("asofdate"));
   }
  

  Timo

• At the beginning and end of the audio Volume control

  How to set the volume at the beginning and the end of audio?  So volume up slightly at full volume in middle to lower the volume and at the end of the audio?

  The f

  Each question is important if you do not have an answer for her. So please never hesitate to ask if you need clarification on anything I wrote or need additional information.

  With regard to the location of the Audio Mixer in first elements 11 Windows 8 64-bit (as for Windows 7 64 bit)...

  Access is under the Tools Menu at the top of the workspace Expert or Tools tabs at the bottom. Please refer to the screenshot

  

  In addition to what has already been post, here's some additional information about your questions.

  If you have not already seen, please check the excellent document Adobe 'Premiere elements/Audio Mixer and Volume control.

  http://help.Adobe.com/en_US/premiereelements/using/WS6C96BC86-7342-44a4-8D3F-936C1D66DE0B. HTML

  I think you'll do OK with the Audio Mixer Panel. But, you can explore keyframing the volume level of the audio element 'elastic '. It is the orange line which runs horizontally through the middle of the audio clip.

  a. hold CTRL of the computer main keyboard and the left mouse click on a place where you want to place a keyframe volume. You can do it in as many places on the rubberband if necessary. Then, with the mouse cursor, move the White points (keyframes) up or down to increase or decrease the volume to a location along the clip.

  

  Here's a blog I wrote about the video and the Audio Track Rubberbands (with graphic how) that should help you to correctly enter this particular workflow.

  http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html

  Thank you for the opportunity to help with your workflow in Premiere Elements. Screenshots are all first elements 11 Windows.

  RTA