4620 everything into a paper circuit problem

Similar Questions

• HP psc 1200: psc1200 paper feeding problem

  will not load paper, rolls move but don't feed

  Hello @Apache655,

  Welcome to the HP support forums.

  I understand that your PSC 1200 does not feed paper.

  I would like to help.

  Paper can leave a very fine dust on the reels. This can prevent the rolls 'capture' the paper.

  I recommend that you clean the rollers.

  Dust, fiber, paper and other debris may accumulate on the pick rollers and cause paper feeding problems. To avoid paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).

• Change paper size problem

  Hello. I am writing from Japan.

  My question is about printing.
  I mainly use A4 size paper, but sometimes use B5.
  B5 is a paper based on Japanese traditional paper format.
  The A4 is now major in the Japan, B5 is always used
  and I sometimes print with paper B5 and bind to the B5 file.
  B5 is smaller than the A4, but size 1: 1.4 ratio the same as A4.

  Now, the problem is:
  "Although I change the paper size of the preview window,
  the change will be not taken into account immediately
  and I have to print at least one page with the old settings to set the change. »

  I am so happy if solve you this problem. It'll be more useful.
  Or, you can tell me another good solution or how to change the settings?

  Thank you very much.

  Use the {Ctrl + P} keyboard command for printing, in order to circumvent the preview before printing.

  Bug 1007779 has been filed on the button print, preview printing opening rather then goes directly to the print dialog box.

• How to print envelopes on hp4620? ERR message is 4620 only prints on paper 11 "

  "HP officejet 4620 rejects envelopes w/err message"only draws on 11"paper".  I use Windows Vistas os

  Hi loud.

  Welcome to the HP Support forums.  I understand that you encounter an error when you try to print envelopes using your printer Officejet 4620.

  The steps on how to load envelopes, then print to them be found in your user's Guide.  There are instructions for Windows and Mac.  "Printing on envelopes" starts at the bottom of page 32 and continue on page 33.   You get the error message makes me believe that the correct paper type was not properly chosen via the software program you use and the instructions in the User Guide should help you solve the problem.

• HP office jet pro 8000: paper feeding problems

  Hi all

  I have a used HP 8000 printer and it will not pick up and feeding of the paper.

  I cleaned the rollers, re started the printer by following troubleshooting instructions...

  I also watched the pickup rollers as they go down, and they move into position, .but they won't pick up the paper.

  Is it perhaps a fit I could do myself?

  Thank you

  Kenneth

  Thanks for the reply, Jamieson.

  I did everything you suggested, ecept the firmware.

  But I leave windows 7 download the internet application... I sssume they picked up later?

  I have a CD with it, but it's probably outdated...

  Anyway... I will try once again and I hope I'll be able to use it and do not have to sell...: {) ~}

• OfficeJet Pro 8610: Paper feeding problems

  Is it possible to manually feed a single sheet of paper in the 8610?  I have sheets simple manual power in my old Lazerjet 4Plus and find it convenient if I use 'good side paper '. (reuse, recycling)

  @Arnot41

  Welcome to the Community Forum of HP.

  I don't think you can "unique paper source" in this printer.

  Part of the problem could be the way the printer picks up the paper - the mechanism (rollers, power, sensors) - must be "so" or something can glitch and you might get an error any.

  Assuming that the paper is the same quality paper that could be used in the printer in any case, it is standard 20 # bnd, white paper, or another high-quality brand HP or equivalent, then the following should work:

  You might be able to 'good use' book on top of new paper in the tray from the stack and use it that way.  If the printer not to panic because of the paper with something printed on the back of the paper, it should work.

  Stack the paper into the tray with the clean side to print "hidden face".   This means that the 'already printed side' will be visible when the paper is in the tray.

  You can try it certainly - if the printer doesn't like it, it will tell you on this subject.

  The 8630 Pro OfficeJet print on paper one side "already used" - I just tested.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others to find Solutions and answers!

• I have a hp lj4 paper jam problem. How can I chat with an expert today?

  The printer lj4 passes the self-test.

  The printer merges the front page that the message of paper jam.

  The paper is not wrinkles just stops.

  She does it with a number of different toner cartrages.

  The printer had only light home use.

  I suppose it may be a mechanical or electrical sensor problem

  Is there a service manual for this printer showing sensors and

  mechanical training courses?

  Hi wsinger,

  I suggest you find a service center to help you remove the output assembly. This requires you to remove all the covers and withdrawal of all carefully don't not to damage other internal parts. You might be able to buy the exit assemble from the link I provided earlier, but I don't think that you will be able to replace just the belt. Let me know what you find?

  Have you considered upgrading to a new printer laserjet?

  Course Laserjet printers

• Photosmart 7520 paper feeding problem

  I get a message that my printer needs paper when it is not. Supply works of the paper when printing directly from the printer, but not remotely. When do remotely, the printer works but no signal no matter what paper. Help!

  Hi @Bouvsrus

  This looks like an out of paper message that you might see. Please use the following document to solve the problem and I would like to know the results of your efforts; An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper.

  I hope this helps, but if you continue to have problems with it, it might be a good idea to call HP.  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  I hope this helps.

  -In support of Movember

• HP Officejet Pro 8600: paper feeding problems

  Help!   My printer has all of a sudden decides to try to feed a bunch of paper at the same time, ruining the leaves.  May 6-12 pages.

  I don't know the terminology to search for this problem.  There are times when paper changes (for example the new color), but not always.  Hate waste, hate to lose the County. Should I clean something?

  Welcome to the HP community @macandsons!

  I came across your message on several pages of food through your Officejet 8600 and wanted to pop in to help. I would like to see you link below and try the steps in the order for that matter. Generally a good cleaning roll will help this type of concern. If you still find the printer pull in several sheets of paper, then I recommend finally call phone support to talk of a replacement printer.

  More than one Page at a time feeds through the printer

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.

  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• Pavilion G6 2005ax: laptop computer charger circuit problem

  My laptop HP G6 will not charge the battery and is not able to run with only one adapter. The charge LED lights up not at all. The laptop requires the battery to start but once it starts, the laptop is able to operate using the power of the AC adapter. I took it to a local service center, and the guy said that the motherboard has a short circuit and needs to be replaced.

  I decided to try to fix it myself. I used a multimeter and found that the power adapter and plug DC work correctly and give output 19.5V. However, when I tested the pins of the battery meter showed a power of only 2, 6V. I'm guessing that there is a problem in the load circuit. Can someone help me?

  Thank you.

  Hello @Prad3791,

  I understand that your laptop encounters a problem with the circuits on your computer to charge, and I'd be happy to help you in this case!

  Given that your motherboard has been identified to have a short circuit, please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• Circuit problem

  I will not let this time with an empty message, I promise. I posted the same thread, I left due to other circumsances. Won't this time without finishing,

  Anyway,.

  Unfinished Circuit2 is my incomplete circuit. Screenshot_600 is a complete circuit of what im supposed to do.

  Anyhelp would be greatly appreciated.

  It's over now, I managed so understand it myself. I hope that everything looks good, can anyone confirm, perhaps a professional opinion?

• design of circuit problem

  Hello

  I created a R - 2R ladder network (joint it photo below) to convert digital-to-analog and I used an op amp to amplify the output of the R - 2R ladder somelevel network. The problem here is that I'm not able to generate ouput when I connect the same versatile Board circuit and it gives precise ouput in multisim someone pls help me what could be the problem.

  The common 741 op amp input mode range is specified as +/-12 V with a power supply +/-15V. Due to the input of this beach circuit design won't change much with the supply voltage. The tension on the no reverse entry in your circuit is ~0.6 V which is well outside the common-mode input range.

  If you need to use a single power supply, then look for an amplifier with negative power included in the common-mode input range.

  Also consider the range of output voltage. For the 741, the output range is of +/-12 V minimum and +/-14 V typical, which means that your circuit cannot guarantee a lower than 3 V output voltage regardless of the digital input.

  Polarization R11 R12 circuit does not a lot because the R - 2R network has a much lower impedance. R11 is in parallel with the impedance of the network (R) output.  The contribution of the 12 V bias is about 70 mV.  Input bias current must flow in input of OPAMP becaues they are the bases of the NPN transistors. If the output of the R - 2R network is located at the entrance common mode range enough current polarization runs through the network (error 80 typical uV).  If the output is not in the circuit's common-mode input range will not work if the impedance will not matter.

  Lynn

• HP Deskjet Ink Advantage 1015: a4 paper print problem

  Hello!

  I have a HP Deskjet Ink Advantage 1015. The problem is that when I print using A4 size paper, printing (text/image) will be resized to fit in a size letter paper. But if I print on a legal (8.5x14) size or custom size paper (8.5x13), printing will not be reduced.

  I don't know what is the issue and I hope that someone can help me since our office uses the format A4.

  Thank you!

  @tadz731
  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer prints the customer size and legal size as it should be, but resizes printing A4 to letter size.
  Don't worry because I have a few steps to solve this problem.

  Although the header can contain a different printer name, the article should solve the problem
  Please click here for details.

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• HP Officejet Pro 8500: Paper feeding problems

  Why my printer HP Officejet Pro 8500 has constant pain to pick up the first sheet of paper, when the 'Print' is selected.  He invariably through a blank sheet and then gives the message "on paper" when the paper is in the tray.  It's same with envelopes.  Frustrating!

  The troubleshooting in the here document steps can help solve problems loading the paper in the printer Officejet 8500.  Please go through all the steps in order.

• Photosmart HP 7510: paper feeding problems

  Power paper on top for scanning or printing is always looking for another document to feed even when there is none of the documents to scan or copy. So I never scan to complete - it shows like a jam.

  Hi hedgejo,

  Thank you for your answer!

  This doesn't seem to be a malfunction of the printer itself material for sure. Right now, I would recommend to Contact HP telephone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Best regards!