Aero Glass

Similar Questions

• Windows 7 Aero / Glass no effect no more working time

  My computer is Windows XP on your main HARD drive. I added another HARD drive and installed Windows 7 Ultimate (32 bit), the feature in question worked but I had problems with fuzzy texts and also I can not set the resolution recommended for my monitor.

  I downloaded and installed the drivers for my monitor from the manufacturer's website but since it does not solve the blurred fonts, I tried to find the latest drivers for my card through the Device Manager. I noticed that the version of the driver was older (Date of the driver in the course of 2009) that is used by the computer when I boot it Windows XP (driver of 2010). Even if I tried to update, it says that he already has the latest driver for it. I managed to save the display drivers XP uses and updated Windows 7 with her ("disk," method etc.) and I finally got the resolution which is best for my monitor that makes fonts very sharp and any other clear enough. I then installed the ATI Catalyst Control Center (was struggling so he can install properly - missing. INF file, CCC not launch, etc.) but I managed to make it work in the end.

  Unfortunately, I lost Aero / glass effect. Troubleshooting (made sure advanced option 'Applies automatically repairs' is checked) gives me the "current video card can support Aero with a driver that is compatible with the Windows Display Driver Model (WDDM).  Contact the manufacturer of your video card or computer for a WDDM compatible driver. "message and finally the error 'Video card driver doesn't support Aero effects. "I thought it's because the drivers of Windows XP was not intended for Windows 7 I so uninstalled and returned to the former working driver, uninstalled ATI Catalyst Control Center (cleaned all the remains) and reinstalled it but ATI does not find the. INF file so it can't update the drivers. Then, I just reinstalled Windows XP drivers.

  Here are some details:

  (After updating the graphics card with the XP ones)

  Adapter type: ATI Radeon X 300/X 550/X 1050 Series

  Driver date: 10/02/2010

  Driver version: 8.593.100.0

  Before I updated with drivers that Windows XP uses now, I remember when Aero was still working (but the resolution is bad), the Date of the driver was some time in 2009.  I read about the update of Windows KB2670838 and discovered that I had installed so I uninstalled it but Windows 7 cannot always bring Aero without it. I don't understand why Aero works with a previous version of a driver but not later.

  Has anyone met and discovered how fix this problem without having to reinstall the operating system? Or should I really give up Aero and settle for the appropriate monitor resolution?

  Thank you!

  Uninstall the current driver.

  Then download from the ATI site: http://support.amd.com/en-us/download on your hard drive.

  Then install.

  (Latest version of the driver is 10.2)

  J W Stuart: http://www.pagestart.com

• Activate aero glass on Windows 8?

  Original title: Aero Glass

  enable aero glass in windows 8?

  To add to this, I think that there should be an option to restore, with the default opacity does nothing to affect the performance of the system.  Solid slabs of color can be a little awkward and the effects Aero 7 made chrome much less intrusive user interface.  Darkening of the color palette doesn't help, because it makes some much stronger colors and the text of the user interface is made more difficult to read.  Desaturate the colours too would also make more difficult to differentiate between active and inactive windows.

  As the taskbar is transparent, it would be certainly possible to do the same thing for the title bars and also include adjustable opacity levels.

• pouvez S10-3 turns AERO GLASS under Win7 ULTIMATE?

  as topic... someone had a little chance to run aero glass on Win7 Ultimate or Home Premium transparent windows? It will cost a shorter battery life comparison default win7 Starter? or maybe a performance lag? THX

  Yes it works perfectly, does not affect battery IMO, no lag, here on my side.

• Resize the volume & Aero Glass on Vista

  I recently bought a MacBook and installed Windows Vista Ultimate on it using VMware Fusion 2. For some reason, he chose to give Windows a volume of 40 GB, which I felt was too small, but I couldn't change it. I used the settings of the Virtual Machine and has increased the size of the volume to 60 GB, and she seemed to accept but did nothing major that I clicked OK. When I have botted Windows, he always says the volume was 40 GB. How can I increase the size of the volume to 60 GB? If I've touched 40 GB, it will add a new 2 GB to the volume I have the possibility to use 2 GB files (rather than 1 large file) selected?

  Also, can I the Aero Glass interface work?

  Once you extend the vmdk file to size, you can go to disk management, and you can extend the disk to the new size.  Regarding the Aero, vista looks like the video card and usually decides whether she can handle the stress of the experience.  I know they have upped the virtual video card to manage several games and others, but I don't know if it is powerful enough to run aero.

  • Kyle

• Lost Aero Glass after installing KB981322

  1. I use Windows Vista Ultimate Edition and applied yesterdays Patch Tuesday updates security after restarting Aero disappeared and I felt as if I was again finished in the year 2000 and did not like it.
  2. I watched Aero questions and found the Aero diagnosis and tool FixIt, ran and he said that Desktop Windows Manager was arrested, so he tried to start it and was not able to solve the problems, I sent a report of this tool as well.
  3. I tried to manually restart the service through services.msc and devmgmt.msc and still no Aero chance had gone.
  4. I've restored about to restore before the updates and come back Aero, installed everything except 3 updates of security of yesterday and those went well, Aero still works.
  5. Made updates to safety one by one and did not have a problem until applying the last KB981322.
  So my question is, anyone else see this question, or was this configuration in the category "take the risk" of the test matrix (cannot be many grumpy like me running Vista Ultimate instead of upgrading to Windows 7, what I do for a bug patch, in order to not to ask to the left)?  And is there another way to patch more directly the problem of Unicode Scripts processor might not have this unnacepptable, for me, side effect?

  If you install it and restart twice, the issue will not happen.

• Aero Glass problem? saved only in black and white video acquisition card: clolour sceme changed temporarily Aero in Vista Basic: I have Vista home premium, 32-bit

  video capture card via USB to the PC... everything works but only in black and white and info: perpetual sceme changed temporarily Aero in Vista Basic:

  What is the reason why it is black and white?

  .. and if so: how to change? I have Vista home premium, 32-bit system (PC bought in 2007)

  can anyone help?

  Hans

  Hello

  1 have had any changes made on the computer before the show?

  2. who is the manufacturer of the video capture card?

  3. If it works well before?

  4 is the issue limited to the video capture card?

  Method 1:

  Check the link and see if it helps:

  Solve problems with Windows Aero

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Method 2:

  I suggest also refer to article and change the theme:

  Change desktop theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Method 3:

  I would also suggest update you the graphics drivers on the computer and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My Aero glass iam does not not on vista ultimate sp2

  My Aero does not work after a restore on vista untimate iam please help

  My Aero does not work after a restore on vista untimate iam please help

  Suhgestions:

  1 use this Microsoft FixIt support application:
  http://support.Microsoft.com/GP/aero_effects_not_working?EntryPoint=WHHT

  2. start > searcg, enter services > press the Enter key > uac prompt > Desktop Window... > click it >
  topic status, it should be... Has begun
  under Startup type, it should be... Automatic
  If it does not, look to the left, click on restart the service.
  Scroll down to find theme, do the same as above.

  3 right-click on an open office space > Personalize > windows color and appearance > under colors, select Windows Aero > Apply > wait > OK

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Activation aero glass: receive Windows Vista Windows 7 guests

  Hello

  I wonder... Anyone who succeeds to activate aero on Windows Vista (guest) on the Windows 7 host?

  Thanks for the replies

  You cannot enable aero as it requires directx 10, and VMware currently only supports dx9 shader model 2.

  (But not tried it myself), I heard that there is a work around to your guest on a host remote desktop connection capable aero.

  As your host is probably able aero... That's what you could try...

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Windows-Vista-Aero-through-Remote-Desktop-connection/

  I'd be curious to hear your findings

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• How can I get Aero Glass to work in sp2 to Vista Home premium?

  Specifically, I can't the sidebar t o go transparent as if it was at first. It worked when I first got the computer (Dell Studio 17), but somehow stopped. All the other solutions seem to refer to windows 7.  My Control Panel has none of the tabs referred to in difficulty.  It does not meet the "convenience store" or "Troubleshooting" also I run Firefox, not IE cause I'm always with bugs.  The auto fix - it wouldn't run or download in firefox.

  Hello

  (a) use Internet Explorer to download and run the fix - it.

  (b) run services.msc from the line of departure and search, locate the themes service, and then select. Use the start/restart option. Once it is loaded and executed, check Control Panel/Customization/Themes and select the Windows Vista theme. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows Update causes glass/aero turns off. How to restore?

  I am currently running windows 7 Professional, and today an automatic update of windows has been installed on shutdown.  After reboot, I lost the aero glass look and it is replaced instead of greyish blue bars.  Using the system restore I can go back to glass, but as soon as the update installs again once he goes.  In any case to return the glass?

  Hello

  Do your restore and then after reboot immediately do the following:

  Configuration-Windows Updates - settings - updated Panel assigned to download but not install so that you can select
  for install or click right on and HIDE as needed. Don't forget if you restore to before these values are set
  Next, you need to put it back again. If you are sure that the question is clear, you can assign their automatic return.

  You can also update video (display driver) with this method and updated 1 AUTO driver
  immediately after the above (why and how are below) even if you only do not put in manually day
  the pilot.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Enable the Aero effect.

  Original title: Aero

  Hello, can I activate the effect of aero on windows vista? my video card is: the intel 82915/GV/910GL express chipset family

  Hello

  
  For information on activation of the effect Aero in Windows Vista, I suggest you to visit the links below:

  What is Windows Aero?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-Windows-Aero

  
  Note: Vista Home Basic does not feature Aero or Aero Glass.

  Solve problems with Windows Aero
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Windows-Aero

   
  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Aero theme Vista theme aand are just the classic windows theme

  Original title: my vista Theme aand aero theme are just windows Classic theme may select and change them, but it looks like classic pls help
  My theme looks like clssic but he says: I have aero or vista theme it's like they were deleted but it was fine just a few hours before... pls help

  Hello

  You did changes to the computer before the show?

  
  Method 1:
  You can run the fix it and check.
  Visual effects Aero Glass in Windows are not working or displayed
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us
  
  Method 2:
  Run the aero Troubleshooter and verify.
  Solve problems with Windows Aero
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero
  Method 3:
  You can update the video card on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  Method 4:
  If the problem persists, perform a system restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• Windows Aero in Vista

  I have Windows Vista Home Premium 32-bit.  I recently had a clean reinstall made, and although I have not noted at the time, it seems that the 'Aero' feature did not work since then (can't swear to this, but it certainly doesn't now).  When I go into the Control Panel/window color and appearance, there is no option for Aero from the drop down.  Only standard Windows and classic.

  All other references to Aero in any other part of the Panel are missing.   I started to do a reinstall of Vista but have not found a "repair installation" version stopped until I did before I made things worse!

  Any ideas?  Are just the Aero files missing?  My chart "score" in the Windows Experience is 4.8, so should be fine for Aero and drivers have been updated.

  Thank you

  Hello

  Visual effects Aero Glass in Windows are not working or displayed
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  You may experience issues with the Windows Aero feature on a Windows Vista-based computer
  http://support.Microsoft.com/kb/945000

  My Vista Aero Glass is turned off, how can I enable them again?
  http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/

  To the need to update or reinstall the video driver (it's a good idea in any case).

  Solve problems with Windows Aero
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  How to enable or disable transparent Aero Glass on Vista
  http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html

  ============================================

  Don't forget to check with the system manufacturer (manufacturer of motherboard for systems to measure) and the real
  manufacturer of video device for updated video drivers.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The Aero effects do not work in Windows Vista 32-bit SP1

  Original title: "Microsoft Description Windos Vista Premium SP1 32 - bit English 1pk OEM product DVD.

  Visual Aero Glass in Windows are not working or displayed

  Hello

  Follow the steps mentioned below and let me know if this can help:

  Method 1: Please run the fixit provided in the link given below by clicking on 'Run Now':

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 2: To enable Windows Aero, follow these steps:

  Start the themes service. To do this, follow these steps:

  (a) click Start and run, type services.msc, and then click OK.

  (b) in the list of installed services, click themes, and then click Properties.

  (c) in the startup type list, click Automatic, click on apply, click Start, and then click OK.

  Method 3: Please refer to the article mentioned below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero