AF board display a single line

Similar Questions

• BlackBerry Smartphones getting contacts to display in single line mode / without company name

  Hello

  I have recently updated our 8310 CEO of 4.2.2.146 at 4.5.0.81 that changed how contacts are displayed in AB - 4.2.2 as a result displays each entry on one line, 4.5.0.81 shows name + company for each entry and takes two lines.

  Does anyone know how to change it online / if it's possible--two lines is a bit prettier, but habits are habits...

  Thank you very much

  Petar

  It's just not possible... I'm sorry.

• How to display/concatenate several lines into one line

  I have a report that retrieves a project name and its corresponding attached resources.
  If tha project has 4 resources attached will appear 4 different columns.
  is there a way to display a single line with the corresponding resources names concatenated into a single cell?

  There is a related issue of PL/SQL and is not a matter of apex. However, see this as an example:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:84

  There are also a bunch of other code related to this issue.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• How to set up single-line message headers?

  Previously, in the message display area, I had configured Thunderbird so that a message appears that the subject of the message in the message header section just above the body of the message. But I just upgraded to to 38.1.0 and now I have in reserve, [address], in the header box, although I've seen-> headers-> Normal (Compact) set.

  Please tell us how to get back to the option just to display the subject line. Real estate vertical display is much too precious to not having the capacity of the old view of a single line.

  Thank you
  [email protected]

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/?src=HP-DL-featured

  The normal headers view removes the routing information only. It has nothing to do with what you are trying to accomplish.

• How can I add a spell checker this spelling laurys for a single line?

  I want a spell checker that checks my spelling for just a single line. For example, Ebay feedback is only one line long then how I spell check my typed in response? Thank you.

  You can do this by changing a hidden preference

  1. Type of topic: config in the address bar and press on enter, accept the message of warning that is displayed and you will be taken to a list of preferences
  2. In the upper search box, type out, will you limit the results to a small number of preferences
  3. Double-click the layout.spellcheckDefault preference and change its value to 2, which will allow the spell on simple lines

  See http://kb.mozillazine.org/Layout.spellcheckDefault for more details about this preference

• How can I get the tabs to go on a single line and a menu of Firefox?

  Firefox allows to have 2 lines above - Firefox menu with tabs and more and another line of the navigation toolbar. during the installation of some programs online, Firefox now have 3 lines at the top, with the Firefox menu on an entire line, the 2nd line of tabs and 3rd line of navigation toolbar. How can I get the tabs to go on a single line and a menu of Firefox?

  With the current versions of Firefox, you can choose to use the menu of Firefox (orange in windows; gray Linux) button at the left end of the Windows title bar or bar menus familiar as in earlier versions. The Firefox button is displayed by default only in Windows Vista and Windows 7, but you can turn on or off or switch between the two or temporarily show the menu bar when the Firefox button is displayed.

  • See how, click here-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox#w_why-are-the-menus-file-edit-view-etc-missing
  • Other changes after the upgrade-> https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox

  If you chose to use the Firefox button and you use the default tabs on top, the tab bar will move to the title bar with the Firefox button only when you are to maximize window (the ' square' the middle button in the upper right corner of the Windows standard application window). Other selected toolbars will be displayed below that (bar Navigation, Bookmarks Toolbar and the toolbars you add via Add - ons).

  • For toolbar, see Selections-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How to calculate the height of LabelField when it displays in multi lines

  Hello friends,

  We use LabelField.getPrefereredHeight () to calculate the height of the label field. But he returned the same value when it is displayed online singel or multi line.

  Please help me for differing from the height of the label while displaying field multi-line and single-line

  Thank you very much in advance

  If the code is simple, then you might want to go ahead and post it.  I can't really speculate on exactly the problem in this case unless I see code.  It doesn't sound like you should not show the width and height of your Manager 1 however.  Here is an example of a sublayout of one of my managers:

      protected void sublayout(int width, int height) {
          int numFields = getFieldCount();        int availableHeight = height;
          int totalHeight = 0;
  
          for (int i = 0; i < numFields; i++) {
              Field field = getField(i);
  
              layoutChild(field, width, availableHeight);
                          availableHeight -= field.getHeight;
              totalHeight += field.getHeight();
          }
  
          setExtent(width, totalHeight);
      }
  

  This code is educating the Manager to use the full width so much to her and didn't use as much height as it needs (drunk on her children and adding up their respective Heights).  I don't know if this helps, but if you have any other questions please do not hesitate to post the code and we'll see what happens.

• the formatting generated XML using XMLELEMENT() my output approximates to a single line, I want to be in an XML format

  Hi I have a problem in the formatting of XML file, that I generated with xmlelement() when I run it gives me putput in one line

  is it possible that I got my output as an XML file...

  This is the expected behavior. PRETTY print (ing) is required for humans. XML parsers do not need XML to be pretty printed. If you open the XML file in a browser such as Windows Explorer or Firefox, the browser will display enough output for you.

  In all, the exit 'single line' is made for PERFORMANCE reasons (lack of useless end of line and CTRL line breaks etc.)

  SELECT xmlelement ("employee name", model ") as"RESULT XML.

  FROM DUAL;

  X

  SELECT xmlelement ("employee name", xmlelement ("name", false))

  , xmlelement ("LastName", dummy)

  ) as "RESULT XML.

  FROM DUAL;

  X X

  XMLSERIALIZE enough to print the result if necessary via indentation

  SELECT XMLSERIALIZE (SIZE of withdrawal CONTENT xmlelement ("Employee Name", xmlelement ("name", model), xmlelement ("LastName", false)) as CLOB = 1).

  FROM DUAL;

  X

  X

• How to merge data from the table with a single line

  Hello

  I have three tables subscription_type, the address and the person. Here are the details of the table

  Person Subscription_type Address                                           

  Person_Id AdressType_id Address_id

  Person_name Description Address_type_id

  Person_id

  Address details

  
  

  There are three types of different address - home, postal and previous.

  Each person can have these three different addresses.

  I want to create a view that displays all addresses of three of each person in the table of the person in a single line.

  Any help please

  In your example, there are 2 rows of columns street1, TOWN, SUBURB etc for a single person. To convert this into a single line, with the new columns we could simply use CASES or DECODE in the select as the SQL below. To understand why consolidation function THAT MAX is used - remove the MAX and GROUP BY in SQL keyword and try.

  Select full_name

  , max (case when description = "Home" then end street1) Home_Street

  , max (case when description = "Home" then end suburb) home_suburb

  , max (case when description = end of the "Home" then City) home_city

  , max (case when description = "Home" then postal code end) home_postcode

  , max (case when description = "Home" then end state_name) home_state

  , max (case when description = 'Postal' then end street1) Postal_Street

  , max (case when description = 'Postal' and then end of suburb) Postal_suburb

  , max (case when description = 'Postal' then the city) Postal_city

  , max (case when description = 'Postal' and then end of CP) Postal_postcode

  , max (case when description = 'Postal' then state_name end) Postal_state

  , max (case when description = "Back" then end street1) Prev_Street

  , max (case when description = "Back" then end suburb) Prev_suburb

  , max (case when description = "Back" then city end) Prev_city

  , max (case when description = "Back" then postal code end) Prev_postcode

  address a

  S State

  No p

  Subscription_type att

  where a.person_id = p.person_id

  and a.state_id = s.state_id

  and a.address_type_id = att.address_type_id

  Full_name group

• display of several lines in column 1

  Hello

  With the help of Oracle 11 g R2.

  Does anyone know of a way to display the results of a query which are normally displayed as multiple lines in a single column with the values of data separated by commas? For example, if I have the following table:

  create table testtable (number of Column1)

  Insert into testtable values (1)

  Insert into testtable values (2)

  Insert into testtable values (3)

  Looking for the result in column 1.

  result

  1, 2, 3

  If the number of records included a 4th place like this

  Insert into testtable 4

  The result should be

  1, 2, 3, 4

  The query must be independent of the number of rows returned.

  Search for the analytical function of the listagg().

  Good bye

  DPT

• Data in multiple lines concatenated into a single line to separate id

  Hello
  
  I have a t1 like this table:
  
  create table t1
  (number of c1,
  number of C2,
  C3 number (4.2)
  );
  
  Data in the table are such as:
  
  ----------------------------------------
  C1 | C2 | C3 |
  -----------------------------------------
  102. 1. 1.1 |
  102. 1. 1.2 |
  102. 2. 2.1 |
  103. 2. 2.1 |
  103. 2. 2.2 |
  -----------------------------------------
  
  How to display data by using a query above?
  
  ------------------------------------------------------
  C1 | C2 | C3 |
  -------------------------------------------------------
  102. 1, 2 | 1.1, 1.2, 2.1 |
  103. 2. 2.1, 2.2.
  ------------------------------------------------------
  
  Thank you

  So you're after what we call 'Aggregation in the chain.'

  Check this link as it highlights several techniques:

  Aggregation of string techniques

  A Re: Concat ranks of the values in a single column Michael

  At Re: multiple lines in a single line in the 'single column Table' followed by reason of Billy on the conduct of a stragg first.

  In addition, 11 GR 2 has the LISTAGG function.

• Concatenation of fields of big kid in a single line

  BEEP: 10.1.3.4.1
  Siebel: 8.1.1.2
  
  Hello!
  
  I'm new to BEEP - we are currently migrating Siebel operate above BEEP reports as part of an upgrade of Siebel 8.1.1.2.
  
  I get my head around BEEP and translated all the features to operate successfully to the new platform. There is one thing, however, that escapes me!
  
  We report against order attributes:
  
  Parent: order
  Child: Billing for the order
  Big kid: attribute of element order
  
  The XML of the BEEP report entry will have a head of parent and many children and grandchildren.
  
  There is a field in children:
  
  Product
  
  There are two fields in the great child:
  
  Name
  Value
  
  I would like to summarize across a single line, the concatenation of all the grandchildren 'Values' for the specific 'Name' fields in records of children with a specific field "product."
  
  For example:
  
  -Parents: car
  -The product child: door
  -Big kid name: color
  -Child large value: Blue
  -Big kid name: complete
  -Great value kids: metal
  -The product child: door
  -Big kid name: color
  -Child large value: Red
  -Big kid name: complete
  -Great value kids: metal
  -The product child: seats
  -Big kid name: color
  -Great value child: yellow
  -Big kid name: complete
  -Child large value: leather
  
  I want to a concatenated string values for the color of the door:
  
  Blue, red
  
  We have to operate in subclassing data stream Fetch and loop on the child and child large stream.
  
  Any thoughts on how to achieve this in TONE?
  
  Thank you very much in advance for your help!

  Hi mroshaw76,

  This should be eazzzzyy :)

  
    --- this will display the car
  Colors of the  : 
  
  

  Note the name of the element are case-sensitive.

• When you type an e-mail, when I go to the next line, it jumps two lines instead of a single line. How can I fix it?

  I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?

  I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• I fill out an application online for the school. Is it possible to configure Firefox to check the spelling in a single-line text box without having to right click each time?

  I want to be able to set the spell checker to occur automatically, even for single-line text boxes.

  You can set the pref layout.spellcheckDefault to 2 on the topic: config page to perform spell checking on line and unique multi line text fields.

  • http://KB.mozillazine.org/layout.spellcheckDefault

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• I would like to organize my toolbars to fit on a single line

  I have so many toolbars, some are really short and I wish I could move them if the courts fit on a single line.

  You are welcome.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.