AF:selectBooleanCheckbox unselected value does not

Similar Questions

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Reset the default value does not

  'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags.  Someone at - he never encountered this before?

  I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing.  I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time.  I have to define arrays of strings individually to null.

  I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel.  Not sure if this is related.

  Thank you.

  This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.

  "Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• Select in 1 table only if a value does not exist

  Hi all
  I have problems, develop a single select statement to accomplish a single return value. I tried variations of DECODE and COALESCE, but it eludes me.
  
  I have two tables which are as follows:
  
  NAME
  ID FULLNAME
  1, senior officer
  Junior 2,
  3, Mister
  4, Senor
  5, Miss
  
  ABBREVIATION
  ID, ABBR.
  1, Sr
  2, jr
  3, M.
  5, ms
  
  What I want to do is choose from the table NAME only if that the value does not exist in the ABBREVIATION table.
  Ideally if I were to do something like:
  
  SELECT * FROM... WHERE (ID = 1 or ID = 2 or ID = 4)...
  
  I would get the following output:
  
  1, Sr
  2, jr
  4, Senor
  
  Thanks for reading!

  You want an outer join.

  SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
  FROM name n,
  abbreviation a
  WHERE n.ID = a.ID(+)
    AND ....
  

  Something like that.

  Complete example:

  with n as (
  select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
  select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
  select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
  select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
  select 5 as ID, 'Miss' as FULLNAME from dual),
  a as (
  select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
  select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
  select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
  select 5 as ID, 'Ms' as ABBREV from dual)
  select decode(a.abbrev, NULL, n.fullname, a.abbrev)
  from a, n
  where n.id = a.id(+)
  order by n.id;
  
  ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
  ---------------------- -----------------------------------------
  1                      Sr
  2                      Jr
  3                      Mr
  4                      Senor
  5                      Ms                                        
  
  5 rows selected
  

  Published by: tk-7381344, November 17, 2008 13:31

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• 10g BEEP format-number for negative values does not

  Hi all

  I tried the following methods to get the negative number locked up with symbols ().

  1 update the mask of BI Publisher properties of field format to

  "#, # 0.00;(#,##0.00).

  2 tried the Oracle formatting options

  <? format - number:A.INVOICE_AMOUNT; "PT999G999G999G999G999G999G999D00? >

  What gives me the result as below,

  Output value

  23.45 23.45 - print correctly

  -12.90 (12.90 - closing paren "")' does not print

  Please help me get the parenthesis when generating the PDF file.

  Thank you

  I had the question.

  This is the format that was used in your model

  ###,###,###,###,###,###,###,##0.00;(#)

  The first half before; does the mask so no problem.

  But after; which is for negative values and that is not the correct format.

  Please use this format on the properties of form field that gives you good number format

  #, ##0.00;(#,##0.00)

• Default value does not appear is not for OAMessageTextInputBean

  Hi friends,

  I'm trying the earned on the OAMessageTextInputBean default. I also debugging messages in the central and this shows that the new value is used. BU that this value is not displayed in the field. However when I click on the page to customize and then return to the page by clicking the back to demand I am able to see the value. This position is similar to the next station.

  https://community.Oracle.com/message/9133380

  The message by the creator of the post says that "I called setForwardURLToCurrentPage() first and in the processRequest, I used setText().". I tried this but it does not work. Can someone please. Here's the code.

  Thanks in advance

  package xxalm.oracle.apps.ar.hz.components.address.webui;

  import com.sun.java.util.collections.HashMap;
  import java.io.Serializable;
  import java.util.Hashtable;
  import java.util.Vector;
  Import oracle.apps.ar.hz.components.base.webui.HzPuiBaseCO;
  Import oracle.apps.ar.hz.components.util.webui.HzPuiWebuiUtil;
  Import oracle.apps.fnd.common.MessageToken;
  Import oracle.apps.fnd.common.VersionInfo;
  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.server.OADBTransaction;
  Oracle.apps.fnd.framework.webui import. *;
  Import oracle.apps.fnd.framework.webui.beans.OADescriptiveFlexBean;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.webui.beans.form.OAFormValueBean;
  Import oracle.apps.fnd.framework.webui.beans.layout.OAMessageComponentLayoutBean;
  Oracle.apps.fnd.framework.webui.beans.message import. *;
  Import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
  Import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  Import oracle.jbo.common.Diagnostic;
  Import oracle.jbo.domain.Number;
  Import oracle.apps.ar.hz.components.address.webui.HzPuiAddressCreateUpdateCO;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.webui.OAWebBeanConstants;

  SerializableAttribute public class XXHzPuiAddressCreateUpdateCO extends HzPuiAddressCreateUpdateCO
  {
  public XXHzPuiAddressCreateUpdateCO() {}

  ' public void processRequest (OAPageContext oapagecontext, OAWebBean oawebbean) {}
  super.processRequest (oapagecontext, oawebbean);
  oapagecontext.writeDiagnostics (this, ' in processRequest", 2);
  OAMessageTextInputBean add2Bean = (OAMessageTextInputBean) oawebbean.findChildRecursive ("HzAddressStyleFlex2");
  If (add2Bean! = null) {}
  add2Bean.setRequired ("Yes");
  add2Bean.SetValue (oapagecontext, "HI");
  oapagecontext.writeDiagnostics (this, 'in' add2, 2);
  }
  OAMessageTextInputBean add3Bean = (OAMessageTextInputBean) oawebbean.findChildRecursive ("HzAddressStyleFlex3");
  If (add3Bean! = null) {}
  add3Bean.setRequired ("Yes");
  }
  oapagecontext.setForwardURLToCurrentPage (null, true, OAWebBeanConstants.ADD_BREAD_CRUMB_NO, OAWebBeanConstants.IGNORE_MESSAGES);
  oapagecontext.setForwardURLToCurrentPage (null, true, OAWebBeanConstants.ADD_BREAD_CRUMB_NO, OAWebBeanConstants.IGNORE_MESSAGES);
  }
  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean) {}
  super.processFormRequest (oapagecontext, oawebbean);
  }
  }

  Jaya Hey,

  This is resolved. I used the setText and it worked. But a question

  Based on the different approach if it's a VO field and field control

  Thank you

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

• php redirection based on the value does not?

  Hello, I have a registration page, a login, failed.php and one page landing page once they have signed.

  the user registers (application - formP1.php) then once they did that they would be redirected to the next page (request - formP2.php) they then add other information.

  There is a redirect on request - formP1.php this case, the user has finished with the page (completed) they are directed to the application - formP2.php

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  the trouble I have is that if I just tried to access applications - formP1.php (which is the registration page) it is automatically sending the user to demand - formP2.php even if they are not signed, then because they are not signed it sends the user to the page failed (obiously because the user of retstrict does not work)

  I have included the code below for application - formP1.php

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "form1")) {}

  $insertSQL = sprintf ("VALUES INSERT INTO LettingsTenApp (tenID, progress, tenTitle, tenUsername, tenPassword, tenSex, tenEmail, tenDobDD, tenDobMM, tenDobYY, tenDepend, tenMarital, tenPrevSurn, tenEmployTyp, tenNINumber) (%s %s %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)',

  GetSQLValueString ($_POST ['tenID'], "int").

  GetSQLValueString ($_POST ['progress'], "text").

  GetSQLValueString ($_POST ['tenTitle'], "text").

  GetSQLValueString ($_POST ['tenUsername'], "text").

  GetSQLValueString ($_POST ['tenPassword'], "text").

  GetSQLValueString ($_POST ['tenSex'], "text").

  GetSQLValueString ($_POST ['tenEmail'], "text").

  GetSQLValueString ($_POST ['tenDobDD'], "text").

  GetSQLValueString ($_POST ['tenDobMM'], "text").

  GetSQLValueString ($_POST ['tenDobYY'], "text").

  GetSQLValueString ($_POST ['tenDepend'], "text").

  GetSQLValueString ($_POST ['tenMarital'], "text").

  GetSQLValueString ($_POST ['tenPrevSurn'], "text").

  GetSQLValueString ($_POST ['tenEmployTyp'], "text").

  GetSQLValueString ($_POST ['tenNINumber'], "text"));

  @mysql_select_db ($database_Letting, $Letting);

  $Result1 = mysql_query ($insertSQL, $Letting) or die (mysql_error ());

  $insertGoTo = "app - formP2.php";

  If (isset {}

  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;

  $insertGoTo. = $_SERVER ['QUERY_STRING'];

  }

  header (sprintf ("location: %s", $insertGoTo));

  }

  @mysql_select_db ($database_Letting, $Letting);

  $query_rsTenant = "SELECT * FROM LettingsTenApp";

  $rsTenant = mysql_query ($query_rsTenant, $Letting) or die (mysql_error ());

  $row_rsTenant = mysql_fetch_assoc ($rsTenant);

  $totalRows_rsTenant = mysql_num_rows ($rsTenant);

  $status = $row_rsTenant ['progress'];

  Redirect the user if their application is completed

  If ($status is "P1complete")

  {

  Header ("location: application - formP2.php");

  }

  and shape

  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" >

  < input type = "submit" value = "Save & amp; Continue"/ >

  < input type = "hidden" name = "progress" value = "P1complete" / >

  < input type = "hidden" name = "MM_insert" value = "form1" / >

  < / make >

  Thank you

  > or is it not the workflow. ?

  This is useful, but it is not yet clear what makes a large part of your code.  So when the user logs in, they were redirected to the script that you have placed in us? Do you have an online version, where you can see the workflow?

  Your script must then use the user connection in the select SQL.  This may be the variable session or the posted username form field.

  If it still does not work, then you should test the value of the session variable or the values posted

  echo $_SESSION ['MM_Username"]

  or

  echo $_POST ['tenID']

  But your code is a mess. Your form fields do not match your PHP. For example, you show us:

  but test it to the ground to help

  If (isset($_POST['tenID'])) {}

• Do not commit if the value does not exist in LOV

  Dear friends,
  
  Here is my requirement (which seems very difficult),
  
  I have a creation page where there is an article like message entry LOV, the ideal scenario is to select the value of
  lov and save the data. But if the user manually enters data that does not exist in LOV and try to save it
  I want to throw an exception.
  
  How to accomplish this task? Please suggest me.
  
  Thanks in advance,
  Had

  Hello

  user1140193 wrote:
  Here is my requirement (which seems very difficult),
  I have a creation page where there is an article like message entry LOV, the ideal scenario is to select the value of
  lov and save the data. But if the user manually enters data that does not exist in LOV and try to save it
  I want to throw an exception.

  How to accomplish this task? Please suggest me.

  -Create an article:

  Name: HiddenFv
  Style: FormValue

  -Timely lov u lovmapping to see right here, you can...
  -Right click on lovmapping and create a lovmapping more... set the properties:

  LovRegion point: Empnum
  Return: HiddenFv

  After these implemented that run the page, it will be automatically throws the exception if the user enters an invalid value.

  Concerning
  Meher Irk

• Rotation of the 3D histogram values does not

  Hello
  
  I have a 3D column chart type, using the Apex anychart 5.1 integration kit and the Values of Rotation set to 90 degrees.
  However this setting or any other has no effect on the graph. The decimal_places parameter does not have all
  effect.
  It is the line in the custom XML part
  
  "< values see the ="Yes"prefix =" "postfix =" ' decimal_separator = "'. ' thousand_separator =","rotation ="90"decimal_places = '0' >"
  
  How can I get the values to be shot?
  
  Thanks in advance,
  
  Sieudial

  Hello

  I created a full example site. An example of a 3D column you find here: http://anychart.apex-evangelists.com/pls/apex/f?p=755:9:0:NO:
  If you click at the bottom, you see the source I use.
  Anychart 5 values replaced by labels, for example:

  
  {%Value}{numDecimals:0}
  
  

  Hope that helps.

  Kind regards
  Dimitri
  ----------------------------------
  http://dgielis.blogspot.com/
  http://www.apex-evangelists.com/

• Linksys E2100 - reset to the default values does not

  Hi, I just bought a used E2100 auction sale, when I plug it I see an 'unnamed' network with lots of bars wireless, but cannot connect because I don't know the ssid and password

  Connecting cable with ipconfig, I get a 10.10.10.108 ip, the bridge is 10.10.10.99. Yet I also can't access.

  I tried the reset down, button for more than one minute, pushing quickly, holding for 30 seconds, holding and the fact unplugging + reconnected the router, but nothing helped.

  I also tried the CD that accompanies it with cable and wifi only, but it does not find the router. I deleted my network wireless by default settings, had my wifi on, was not connected to any network, but the CD did could not find the router.

  When the router is enabled, the WIFI led flashes around once per second, while the LAN led flashes randomly as it should.

  I was wondering if there is anything else I can do?

  Thank you.

  He has no doubt DD - WRT or some other third-party firmware on this subject and they disabled the reset button.

  You can try combinations of username/password of root/admin name.

  Most likely, you will need to find another router. I hope that you do too much for her at the auction. You can buy a router from linksys refurb really cheap out of the home Bank. More safe too.

  Edit: E4200v1 supports the third-party firmware and is probably a better router than the E2100L. The E4200v2 does not support third-party firmware.

• TO_DATE with invalid month value does not gicve of error

  I have a where clause that has a where clause of the query condition like this:

   where  Reynolds in ( '113' ) AND Rotomac in ( '418' ) AND (to_date(ins_date,'YYYY/DD/MM') >= to_date('01/90/2012','DD/MM/YYYY') OR del_date is null);
  

  ins_date is varchar2 which I convert it to a DATE using the to_date function.

  Why it does not work it only gives me error even if I put 90 MM?

  you have lines where this part:

  Reynolds ("113") AND Rotomac games ('418')

  and this part

  del_date is null

  is the problem?

  because you get only an error when the condition is evaluated is not the case if she didn't have to be evaluated...

  example:

  SELECT * FROM dual

  where 1 = 2 and sysdate > = to_date('01/90/2012','DD/MM/YYYY')

  will not return an error 1 is never equal to 2, so no matter what the condition after the and is...

  HTH

• The Matte value does not

  I have a composition including background aerial video images, of the chassis of the video overlay of 3d rendering.  I hit framed a png of a tree that moves and can change with an existing tree.  I want to use the tree view of the png as an object remove (erase) the sequence of 3d rendering and expose the original tree that is in the air video.  I added the effect mat set to rendered 3d layer and chose the tree png as the object of 'take the mast of layer', but it does not work.  I tried all the options of the effect, and nothing seems to work.  Any suggestions?

  Before dialing the hidden layers and scale. AE has a specific rendering order and as the program is concerned, he cannot see your changes using your current method.

  Mylenium