After 1 GB memory upgrade Qosmio G10 - 133 does not start

Similar Questions

• After that recommended BIOS upgraded satellite a series does not start

  During the recommended BIOS Flash upgrade of the system came in suspended state.
  I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
  Now the system does not even show the bios screen. Is there a way to fix this problem?

  Hi Tom

  Obviously something went wrong with the BIOS update and now BIOS is damaged.
  I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

  I'm sorry. :(

• How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  Install W7 sp1.

  Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

  See you soon,.
  Jerry

• Put 8g memory in es1-512 but does not start. Had to put 4g in. Does anyone else have this problem?

  Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.

  Hello

  Here's the original memory stick for Aspire ES1-512:

  KN.8GB07.013

  SODIMM.8GB.DDR3L - 1600.KINGSTON

  OR

  Compatible memory: Kingston

• Qosmio G20-108 - does not start

  Just buying the G20 - 108 worked OK for about 2 months. Now, after being in charge of the day to the next, powers, gives the startup sound, the lights on the keyboard, power backlight the display but does not start. Sometimes after 3-4 minutes tune windows startup can be heard, not always.

  ADV69

  Hello

  You see the Toshiba BIOS screen after turning on the laptop?
  You can access the BIOS?

  If you see something on the screen and access the BIOS, I would recommend load default settings here.

  But, generally speaking, for the moment, it is difficult to say why this happens, so you should test step by step.

• Pavilion g7-1368dx upgrade to A8 - 3500M, does not start

  My Pavilion g7-1368dx came with a processor A6 - 3420M.  I have the BIOS f.52 (works very well for months).  I tried to upgrade the processor to an A8 - 3500M (same 35W TDP, socket FS1, and turbo 1.5GHz/2.4GHz) for a boost of graphics (400 vs 320 shader cores).  It is listed in the service manual.

  With the A8 - 3500M installed, the laptop does not start.  The screen remains off while the Num and caps lock flashing at regular intervals indefinitely.  There are _no_ beeps, as if an error code has been given.  The fan works.  There is no disk activity.  I repeated attempts with other components disconnected one at a time to eliminate other possible sources of the problem, until it was just the processor on the card (without RAM, HD, DVD, wireless card).  I got the same results.

  Then I reinstalled the A6 - 3420M.  Without the other components, the system flashes both the NumLock and caps lock shift and beeps for appropriate error codes.  Other components reinstalled, it works fine.

  Is there something special I need to do to get this to work with my laptop processor?  For the moment, I think that the new processor is bad.  But I want to check something to try before I return it.

  Thanks for any help.

  The service manual for the G7 laptop series and is not exclusive to the g7-1368dx model. Different models within the family of the G7 uses different hardware and supports different hardware upgrade paths. This means that an element in the maintenance manual is not necessarily supported for each model of the family of the G7.

  Is the product number of the laptop A7A46UA?

  If so, the motherboard with this unit provided is 649948-001 such listed in the service guide. All the parts for this unit are here.

  I searched the part number 669690-001, the A8, a HP PartSurfer processor and expanded the note at the bottom of the result page to see what units came with this processors. I looked at three different models, and each of them had the motherboard 649950-001.

  Documentation that came with the A8 Processor units had a motherboard different than what the units supplied with the processor A6.

  Due to the A8 units having a different motherboard as the units of the A6, I suspect that the motherboard has your device does not actually support the A8 processor. I'm sorry.

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• Qosmio G10-133 - battery not detected after upgrading to Windows 7

  Hello, I hope someone can help my frustrations here.

  In recent weeks, I successfully upgraded my laptop to Windows 7, an increase of memory to 2 GB, bought new power cord for laptop, new battery and resolved all the issues that Windows 7 has cast on me. The laptop and runs like one dream other than a question that seems to have had worse.

  The laptop no longer recognizes the new battery. (battery with a cross through it and a photo of current) For about a week after installing the battery, this has worked fine but now does not detect everything. I don't have any errors in Device Manager and windows recognized the ACPI etc battery inputs and has no problem. I also loaded the package of Toshiba value added that Windows 7 has found for me but still nothing. Battery not charge even though sometimes the battery works for about 30 seconds to start up if the battery is back removed and implemented, then stops again (once Windows loaded) I tried many things like the disabling of the driver, reinstall battery etc, but nothing. I tried the iniitally of battery with Windows XP and worked well.

  I have also searched the web and saw that many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS, but Toshiba have not released an upgrade from the original in 2004 (which is for WIn XP Media Center), and there is no settings in my BIOS for ACPI etc.

  In addition, I can not calibrate the battery because I can't do anything with it. I don't think it's a question though.

  If anyone has any ideas I would really appreciate it or all the links to the drivers etc.

  If this is sorted my laptop should last for 5 years!

  Thanks for reading this.

  Dickie

  Hello

  First of all, I doubt that many other laptops equipped with Windows 7 have this problem. I've never heard of this and normally charge the battery will not be controlled of the OS. It happens automatically and your battery will be charged if the AC/DC is plugged. If the OS doesn't affect it!

  To be honest, I also don t know why your battery isn't detected, but what happens if you turn off the laptop and let the AC/DC adapter plugged in for 24 hours? After that, it should be possible to work on the minute of the battery for 1 hour or more.

  If this isn't the case, it seems to be a hardware problem, maybe the battery doesn t work correctly and should be replaced. You should contact the retailer where you bought

  By the way: some nice and interesting tips on battery:
  http://APS2.toshiba-tro.de/KB0/HTD9401AZ0001R01.htm

• Qosmio G10 106 will not start

  My Qosmio g10 primer not. I am getting white vertical lines on each side of the qosmio splash screen. If I try to boot from the drive, the screen turns white with a cursor blinking in the upper right.

  I can't boot into SafeMode either. One of the suggestions, as the machine is longer under warranty and I suspect that it is maybe the motherboard is dead.

  Hello

  It's not easy to tell exactly what part is wrong, but in my opinion there must be definitely something wrong with the hardware.
  I t can give you an appropriate response to the fault, but I recommend asking Toshiba service for opinion. It should have more experience in these matters.
  The service partner could start some diagnostic tests can locate the fault.

• After completing the upgrade Windows 7 laptop does not start

  A ran the Windows 7 upgrade on a new laptop Sony Vaio with Windows Vista. After installation is complete laptop ran fine for 2 days.

  Necessary to restart after trying to connect a new printer. Stop the laptop normally, but after a reboot would only boot to Windows Boot Manager.

  The problem is that the upgrade of Windows CD I have is not start even if the DVD has been the first priority in the boot sequence.

  If you are somehow able to boot from the installation DVD:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on command prompt and try the following commands (they may or may not work):

  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD
  Bootrec /scanOS

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Qosmio G10: OS does not work properly (very slow)

  I have the same problem with the CPU. Pc slows down extremely, sometimes it's back to normal, but after a few seconds, it's like hell once again. I tried various OS (Win xp Home, Xp Pro and XP MCE) so far, but none of them does not solve the prob. I tried then to see if I can slow down the CPU manually, but that did not work, either. Kinda funny, because I had no probs virus, nothing.

  Actually I don't really know what I should do now.
  If there is anyone out there with the same problem, let me know, if all is well there is someone who has solved.
  Otherwise, I'll go with linux, maybe that's going to work.

  Anyway, please if anyone has good suggestions...

  Thanks in advance

  CU

  pistolpete

  Hello

  In my opinion, you should install OS using recovery media. The image content designed Toshiba all drivers necessary, and it should works well. It has been tested and there should not be any problem. If the antivirus application is installed it can slow down the BONE quickly (as in my case).

  Like I said, the recovery DVDs to use for the installation of the OS and enjoy life.

  Good bye

• Help! CRITICISM! AFTER EFFECTS CC 13.5.6 LATEST VERSION DOES NOT START!

  AFTER EFFECTS CC 13.5.1 KEPT SE CACHE ERRORS SO I'VE UPDATED

  After that I updated

  It worked for 2 days then it stopped working

  I received a warning:

  Error at launch. "Invalid type conversion |

  then I got another error right after

  (0xc0000142)

  I tried to uninstall and then reinstall.

  IT STILL DOES NOT WORK!

  I opened Photoshop cc 2015

  then I opened after effects.

  and after effects worked for a little while until what I closed it.

  It is more open now!

  the error messages appear more mysteriously

  but it doesn't always start.

  He comes to load the splash screen and stops.

  HIS FRUSTRATION!

  CC 2014 WORKED VERY WELL

  I UPGRADED 13.5.1 CC 2015

  I STARTED TO MAKE MISTAKES OF CACHE

  THEN I updated to 13.5.6

  AND IT NO LONGER WORKS...

  HAAAAAALP ME!

  Plug

  Windows 10

  64 bit

  8 GB RAM

  Intel core i5

  294 used/914 total gb hardrive

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• Failed Windows 7 upgrade - now my computer does not start - what do I do?

  I tried to upgrade to Windows Vista 64 for Windows 7 64.  During installation to 75% of the last step, the computer "hung up" for hours.  I abandoned the installation to fail.  Have no idea why it does not have since I ran the compatibility test, deleted all the programs of conficting, anti-virus, etc.

  Now, I can't get the computer to boot.  I tried to go the last good start with Vista 64 and the operation failed.  I also tried a variety of corrections that are posted on several forums.  All I can get is a continuous loop of the attempts to start (for example. Windows - Vista - HP diagnoistics of screen - screen black screen prompts - and then he repeats)

  Without success, I tried to do a system restore - which also failed.  Any suggestions on how I can recover the system and try the upgrade again?

  Clean install Windows 7 with upgrade media
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp

  Clean install Windows 7 with upgrade media and the product key on formatted or empty blank hard drive
  http://www.mydigitallife.info/2009/10/27/clean-install-Windows-7-with-upgrade-media-and-product-key-on-formatted-or-empty-blank-hard-drive/

  -Activation of the phone it takes-

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Qosmio G35-AV650 does not start after format

  Okay, so I downgraded/upgraded my computer back to XP from 7 a month ago.
  Yesterday, I went to the library for all my updates and whatnot that I neglected since the upgrade. When I turned on the computer in the library, it would not be loaded the office correctly and an error box open stating that it was impossible to recover the THotkey. It turns out that my feature key drivers took a dive. I've done everything I can to solve the problem. Nothing worked, I decided to reformat.

  Early upward the dinosaur this afternoon when the format is finally finished, it would not fully boot screen where you are asked which language you want to use, what time format, all of these bases. I tried to reboot several times, finally tried safe mode, even to reformat again, nothing works.

  Now, seeing as I was only reformat to XP in order to enter my card default sound drivers to see if they would work on 7 (the company that made my card was bought shortly before 7 was released and that they still need to make new drivers), I decided to say screw that it and any format the computer back to 7. When it loads everything from disk (disk? drive?), it goes to the screen asking what disk I want to install, it says that I have no disks on which I can install it.

  I came across this problem before, the first time that I put 7 on the computer. Since I have two hard drives, it needs the RAID drivers that connect the two. I downloaded several different, all for Toshiba Qosmio G35-AV650 RAID drivers, but it detects all the drivers. The way I do it is to put on a flash drive and tell the computer to get them from there. I do everything the same way I did before, but nothing works at all. I tried to go into the BIOS settings, but I have no idea what I could do.

  I'm tearing my hair out trying to figure out what I can do here, but I'm completely lost. Any ideas?

  You use a generic Windows 7 disk? Or a Toshiba Win7 upgrade disk?

  Basically, you need the drivers SATA F6 (INFs) on a USB Flash drive during the installation of Win7. The version of Vista should work fine in Win7.

  You can change the RAID settings in the BIOS to "JBOD". First, make sure you back up important data.

• Qosmio G40-108 does not start

  Hi Gang

  I hope that there is some good buddies out there that can save a window double glazing to be mullared by that lappy.
  I had (Qosmio G40-108 with 4 GB of RAM) since August 2007. Everything was fine until two weeks about where it kept crashing during the execution of a couple normal progs that I use.
  After reading several messages from buddies with similar problems, I think it might be the PCI express graphics. Is this good? I can swap out? Or advice, blaggs, ideas or suggestions are very welcome. :)

  * Do not forget: there is always someone worse off than you... *.

  What exactly happens?
  Your Qosmio freezes simply and you must turn off or switches off without any warning messages?