Help! CRITICISM! AFTER EFFECTS CC 13.5.6 LATEST VERSION DOES NOT START!

Similar Questions

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• After restarting the Services, service of the Foundation does not start

  Hi all

  Recently, I applied the patch and restarted services, later noted that the services of the Foundation does not start. I mentioned newspapers and show error below.

  < 29 April 2015 19:45:30 PDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 of Oracle Corporation >

  < 29 April 2015 19:45:31 PDT > < critical > < security > < BEA-090518 > < could not decrypt the username of {ESA} attribute value = 9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA in the C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties file. If you copied an attribute costed boot.properties of another area in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, replace the attribute encrypted by its value in clear text, and then restart the server. The attribute will be encrypted again. Otherwise, change all attributes encrypted values in clear text, and then restart the server. All the attributes of encryptable will be encrypted again. Decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException. >

  Enter the user name to start WebLogic server:

  I have connected to the Weblogic Server and checked, the service of the Foundation is not started.

  We do not have the backup of the installation folder.

  Manually, I have edited the user name and password and the services, started but no luck.

  Get an idea on processBootProperties.cmd, I'll set it off for the new boot.properties.

  Please suggest.

  Thank you

  Hi all

  I have manually enter the credentials for the logical server and services. It worked.

  I did the same thing first, but I made a few typo errors in credentials, he killed for more than 1 hour...) :

  Thank you

• After effects CC 2015 + El Capitan Beta 5 does not work: Message on the Console &amp; Hardware details attached

  This is what appears in the Console:

  19/08/15 2:14:18.195 PM After Effects [2377]: * the Assertion failure in French-[NSMenu itemAtIndex:], /Library/Caches/com.apple.xbs/Sources/AppKit/AppKit-1391.12/Menus.subproj/NSMenu.m:947

  (He not there no com.apple.xbs in my/Library/Caches/btw, or I would have tried remove!)

  And the dialog box says:

  After that the effects can't continue: unexpected failure during the application startup

  It is on a MacBook Pro mid 2013 with switching graphics and CUDA Driver Version: 6.5.51, GPU Driver Version: 10.6.41 310.42.05b02

  I hope this helps, I saw at least another post mentioning the same problem.

  It works in Beta 7

• After effects CC 2015 (13.6.0) Undo does not work properly

  I have problem with cancellations. Undo does not work properly

  13.6.0.165

  Win 10 64-bit

  NVIDIA Gtx 970

  4770 K I7

  Does anyone have the link to update to fix after effects CC 2015 (13.6.1)?

  I can't wait for approval for the first version that I just applied.

  
  

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• After that recommended BIOS upgraded satellite a series does not start

  During the recommended BIOS Flash upgrade of the system came in suspended state.
  I waited 1 h before trying to restart the laptop, I had to do with force by removing the battery.
  Now the system does not even show the bios screen. Is there a way to fix this problem?

  Hi Tom

  Obviously something went wrong with the BIOS update and now BIOS is damaged.
  I'm afraid there is nothing you can do except to authorized more close contact and ask for help.

  I'm sorry. :(

• After installing antimalware doctor, tried to restart, but does not start...

  .. .He is as file system of the disk is not recognized never gets to a point where I can enter in F8 safe mode. The drive is recognized in the BIOS and diagnosis Seatools says its OK. Use a LiveCD of ubuntu, I can access the drive and see the file system. Tries to start on a Windows XP CD to the recovery console to run chkdsk, fixboot, fixmbr etc., says it cannot detect a hard drive. Can anyone help?

  Certainly, you have a SATA hard drive.  The original Windows XP CD does not include a driver for the SATA drives (Ubuntu and the BIOS most recent do).  When you boot from your Windows XP CD, you will probably come to a point where it asks you to press F6 to install additional drivers.  Here's where you need to press F6 and then install a floppy with the SATA drivers on them.  If you do not have a floppy drive, things get complicated, you may need to create a XP CD slipstreamed with the pre-installed drivers.  You can probably find the SATA drivers from the Web site of the manufacturer of your computer or the drive manufacturer's Web site.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
   <>http://support.Microsoft.com/kb/314859/ >

  If I were you at this point, I would be your drive Ubuntu allows you to save your data from hard drive on a USB drive or a network drive, and then reinstall Windows.  You can probably press a combination of keys very early in the boot process before the Windows startup that will render your machine on the condition that bought from a recovery hard disk partition.  This is a radical step, but you might find it faster to attempt recovery.  Check the Web site of the manufacturer of your computer for a user manual for your computer that describes how to do this.

  HTH,
  JW

• Help! I have HP Pavilion, Vista Premium. Computer does not start correctly because I tried to install SP1 after several procedures, as described below. hope you can help.

  Help! I have HP Pavilion, Vista Premium. I had problems with IE8, tried to download IE9, could not because of the system not supporting. Tried to download the SP2, but said no SP1 on the computer to reinstall. Tried to reinstall SP1... now computer begins.. .windows black page is loading files, corporation microsoft, hot flashes, blue screen, startup Repair box appears. Past by looking for problems, Microsoft windows - startup repair cannot repair this computer automatically. I send information about this problem (recommended) and asked to see the error. here: I hope you can help.

  Signature of the problem

  problem event name startuprepairv2
  signature of the problem 01: autofailover
  signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  problem signature 03:6
  problem signature 04:655374
  signature of the problem 05: corruptfile
  signature of the problem 06: corruptfile
  problem signature 07:3221225624
  problem signature 08:0
  signature of the 09 problem: unknown
  problem signature 10:1168
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hi magali,.

  Since starup repair fails, you can try perforiming a restore disc Windows Vista starting system and check if the problem occurs.

  For more information, you can consult the following articles.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  What are the system recovery options in Windows Vista?

  When you are able to boot into normal mode, you can read the following article and try the steps to solve the problem of installation of SP1.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  You can also read the following article and check.

  Learn how to install Windows Vista Service Pack 1 (SP1)

  Hope this information is useful.

• Firefox plant start up after update of Norton 22.5.4.24 - does not start even in safe mode

  Windows XP

  Install Firefox 41.0.1 own - same problem
  Install Firefox 40.0.3 own - same problem

  Incident reports could help us by giving you an individual diagnosis, but if they are accidents of almost instantaneous startup, allow me to mention something that is 'flow' where you have this problem:

  Firefox crashes a few seconds of starting if you have either the Applian Technologies Freecorder and Replay Media Catcher programs in combination with Norton Security software (and possibly other security software).

  If you have either of these Applian programs and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

  Firefox will start normally after that?

  (If you do not uninstall the program, another user said he used msconfig to stop execution at startup and that fixed FlvSrvc.exe. See: https://support.mozilla.org/questions/1086722#answer-789197)

• After 1 GB memory upgrade Qosmio G10 - 133 does not start

  Try to pass 512 MB with memory Kingston KTT3311 / 1 G 1512 MB

  I put the new Kingston 1 GB in the top slot of spare. When I rebooted the machine, the fan has come and the indicator light on the front came. But it seemed no not no start-up process at all and the screen remains blank. After a while the fan is stopped and the machine went into 'stop' mode I tried once more with the same result.

  I then pulled out the new 1 GB Kingston memory, leaving the memory of old as he was, and the reboot of the machine as usual with no message or error. I thought that the machine would automatically pick up the memory of mew and reconfigure itself.

  Any ideas on what could be wrong.

  Yes, the laptop and the BIOS should automatically pickup the new module of memory installed. Try to enter the BIOS and check if the module has been recognized and safe the BIOS settings.

  But perhaps you are using a bad?

  I think you should try the recommended Toshiba the memory module. In this case, you can be sure that it will work, and you are on the safe side to 100%.

  I found these PC2700 DDR - RAM compatible modules;
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

• MAC JAVA for DSP does not work, the latest version does not say not found please help

  

  This should now be resolved. If you are experiencing download errors try to clear the cache of your browser or wait a few hours. It can sometimes take a bit for this ripple through all the layers of setting cached.

  Neil

• After the deployment of a Windows 7 image, pc does not start after Windows logo

  Hello

  I tried to install a laptop via a Windows Image. After that I deployed the image, the laptop does not start past the Windows logo. Normally I had to change the SATA AHCI setting to solve this problem, but he was already on AHCI.

  I tried to install it via a Windows 7 installation CD and it works, but I want to fix the laptop / image to work on this laptop.

  The logo of Windows get stuck, then I get a blue screen very quickly and it restarts. Also when I try to start in safe mode, it's the same thing. loading everything, then it gets stuck and also a really fast blue screen and reboot.

  Someone at - it an idea may be what the problem?

  BR,

  Jim

  I did restore by image much, many times without ever a problem.

  • I only use the integrated Windows 7 image creating installation
  • I only use a DVD + R White, never-r
  • I create the image ONLY on install brand new to be absolutely certain, there is no corruption

  I've heard of this kind of problem does not happen when the image was made from a damaged disc.  Which simply transfers the corruption.

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• I downloaded Adobe Creative Cloud and asked After Effect.  They received my payment, but did not send me the activation code.  Where can I find it?

  I downloaded Adobe Creative Cloud and asked After Effect.  They received my payment, but did not send me the activation code.  Where can I find it?

  Hi Dawud,

  You can follow the article: sign activation, or connection errors. CS5.5 and later, Acrobat DC that will help you get this issue fixed.

  Let us know for any additional questions.

  Thank you

  Yann Arora

• After effects crashes when switching between applications (Mac) and After Effects does not start after you enable journaling

  Hey there,

  When to (for example), Illustrator and AE program seems to have a greater likelihood of crashing. I was not able to determine exactly why this is happening.

  I often copy - paste forms of AI in AE, but it is not always plant AE. It could be the speed with which I switch between programs, but I'm still not sure about this.

  In addition, it breaks the audio driver somehow and Spotify (running in the background) stops playing. Restart Spotify corrects this problem.

  AE crashes and is often frustrating. I sent Crash Reports, but so far no help.

  I just activated registration--which has also caused some AE to fail. This time when (re) launch the program. It wouldn't start, but also did not highlight as suspended in the Force Quit of OSX dialog box. She would not answer Force closes and hung my system when I tried to reboot. You had to manually restart my Mac Pro.

  Well, variable time!

  Mac Pro (end 2013) 3 GHz 8-Core

  64 GB of ram

  OS X Yosemite (10.10.2)

  After Effects CC 2014 with the latest updates

  Illustrator CC (not 2014) same with the latest updates

  He does not behave like that on my iMac at home.

  Any advice would be (very) welcome at this time.

  Huh! I should have checked the settings correctly. It is a facility relatively new compared with at home.

  Solution: Check that there is enough RAM available for other programs.

  In addition, light AICB could do the trick, too. But I suspect that the latter has a much greater effect.