After 10 attempt when erase all data are not checked

Similar Questions

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• FDM erases all data outside the intersection given in file multiload-Using "replace".

  Hello

  I am a beginner in FDM and attempting to load a file of data to a specific member multiload in Essbase, but as soon as the loading is finished of FDM to Essbase I see that the data I have loaded but old data be wipe out other intersections of members. FDM is erase all data of all intersections that are not yet in my workload file. I use the option replace.

  Please suggest how can I get rid of this. I want to just load a piece of data that is in my data file.

  Thank you

  VJ

  Thanks SH and TOM, now, I have pretty good imposed by reading your responses! My problem is solved

  In fact, I used option replace and 'R' as a tag of control in my multiload file, but after I changed the tag to control the form R, M, its working fine. old data on another intersection are there (for the same entity POV, category etc...) and new (file) data obtained also loaded successfully. It does not erase the old data except the intersection even given in the folder.

  Is there a limitation, the disadvantage or precaution associated with this change?

  Thank you

  Vivek

• When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?

  This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the

• Z10 Z10 BlackBerry BlackBerry data are not compatible with the version of the software you are currently using

  Due to some problems with my BlackBerry Z10 I concerned with my service provider, after recommendation that I wiped my BlackBerry Z10, to update the OS security

  After all this. I am unable to restore completely, (Emails, Contacts, calendar and device settings cannot be restored)

  Link blackBerry screen: the data are not compatible with the version of the software that you are currently runnin

  Kindly guide me I'm too worried about my data, which is very important for me

  If you still get www.bberror.com//bb10-0015 and have not corrected:

  Read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...

• Reference data are not available in version 12.1 on Windows XP5.1 operating system distribution

  Hello

  I get the error "reference data are not available for release 12.1 on the distribution of the Windows XP5.1 operating system" when the installation program runs the verification of prerequisites to install Oracle Developer Tools for Visual Studio. I am running Windows 7 Enterprise on 64-bit computer. Am I missing another precondition that I'm not aware of this couldn't cause this error?

  Thank you!

  Hello world

  There is a bug in the installer. Here is the workaround:

  After checking the installation program is not running, please open that file in the staging area where you have unpacked ODAC:

  ...\stage\cvu\cv\admin\cvu_config

  And in this file, change the CV_ASSUME_DISTID value that is there to 6.1

  Save the changes, and then rerun Setup.

  This will force the installer to requires that you have Windows 7.

  Thank you

  Christian

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

  Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

  Hello Charlie,.

  You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

  Kind regards

  BearPup

• I had to rebuild the computer and reinstalled the photos of cecently.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  I recently had to rebuild the computer and reinstalled the photos.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  Default LR stores all changes in the catalog file, not in the pictures. So if you have a backup of your original catalog you will need to copy on the newly rebuilt system and open it in LR. You will then need to recreate a link to the images in the catalog depending on where are your images and where the original LR catalogue think they are.

• All data is not cause to the specified criteria. Although SQL is good

  I get the message in the answers below.
  
  All data is not cause to the specified criteria.
  
  I set the recording level 2 and confirmed that the generated SQL is good and when run directly with db, the sql returns data.
  
  Where can I check look at why no data is returned in the responses, even if a good sql is generated?

  Do you have RAM on your system for this particular table? Perhaps, this is one place to check. If it is enabled, try RAM stop and report.

  Please assign points if helpful/correct.

• ORA-20001: APP-FND-02604: one or more of the following data are not valid

  Hello
  
  I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:
  
  Start
  for e in loop (SELECT a domain NAME)
  -dbms_output.put_line (e.name); just to confirm the names are there
  fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
  end loop;
  end;
  */*
  
  
  eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:
  
  ERROR on line 1:
  ORA-20001: APP-FND-02604: one or more of the following data are not valid:
  APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
  SECURITY_GROUP = STANDARD.
  ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
  ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
  ORA-06512: at line 4 level
  
  
  However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.
  
  Dula

  Hello

  User_id = this will come from the fnd_user table?

  Fix.

  responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

  You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

  Thank you
  Hussein

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• How to remove line empty when the data are not for a text field

  I created a PDF with Acrobat Pro 11 model. This model has an address of the employer with the address line 1, address line 2, city, State, zip code, country. The requirement is to show address line 1 and line 2 address in separate lines and address line 2 cannot be present always. If address line 2 is not present then the PDF should not show a blank line. How do I get there?

  These data are populated through xml by a publisher of BI. New line characters do not work.

  Appreciate your help on this.

  Hi sprphoto123,

  If you do not enter data in the text field 2 then you can set the form field property to is not mandatory, but if you want to disable the 2nd text field, you can add a check box in front of it to turn off the field. This can be achieved using JavaScript.

  Kind regards

  Nicos

• FF 8 stops downloading after 15 minutes when you don't surf not actively on the net at the same time. What can I do?

  Everything works fine except when downloading more large packets of data. Se is not a problem, but when I let the computer itself, downloads stop after a short time. FF8 and Internet still work. Never had this problem with previous versions. Help, please. I really don't like to spend hours in front of the computer, clicking every few minutes on an internet page just so that downloads are not interrupted.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.
  
  Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.

  See "Antivirus disable in Firefox preferences - Windows."

  • http://KB.mozillazine.org/Unable_to_save_or_download_files

• VERY URGENT. Data in accessible after the system recovery which says - data will not be deleted.

  I did a system restore by pressing F11 on my laptop HP XP Home pre-loaded. The step has asked told me that by doing a restore via this procedure, my data will not be changed or lost. I did not a destructive restore.

  Now after recovering my laptop works very well, however I got two sets of data - much of the imp in My Documents data and personal data to another folder. When I went back to work on the laptop, I was able to access the data that I had the pvt. folder, however, any data that is very Important to me and who was there in My Documents has been moved to a new folder named HP and I can't access it. The capacity of the disk hard has not changed, which means that the amount of hard disk space that has been used before is the same, so it means, no data has been removed. I analyzed the defragmenting drive C drive and can see the report, which said, all data is located in the HP folder, but when I try to enter the folder, it says access is denied.

  During recovery, I haven't used any password, which could help to access this folder, I am still unable to view this file, I tried to use an administrator in safe mode too, still the same message.

  I called HP customer, but after talking with them for an hour, I couldn't find a solution. I called microsoft and they say that they support no more than XP? PLEASE HELP ME. I do not understand when I follow on screen instructions from microsoft themselves, why am I facing this problem? Is it a fault of customers to purchase an original product from microsoft, and then when he has a problem microsoft responds that they cannot help them?

  Since I followed all the instructions from microsoft, I'm in trouble, if at any time it would give me a warning that your data won't be accessible or will change, I would have not been made.

  PLEASE HELP ME, I NEED AN URGENT DATA. I HAVE A FEW PRESENTATIONS MAJOR IN THE COMING WEEK, AND I DON'T GET.

  Most probably, you have just to take ownership of these files.  The recovery process has probably created a new user, who does not recognize the system as having access to this folder.  To do this follow these steps:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW