FDM erases all data outside the intersection given in file multiload-Using "replace".

Similar Questions

• All data in the non-visible response file

  Even if it seems that I am able to save the data in the response file, I can't see the data in all fields.  He's here because when I export to a csv file it shows up.  What I am doing wrong and how I can fix it?  Thank you

  Hi Mark,

  Following link might help: help Acrobat | Collection and management of the PDF to form data

  Kind regards
  Rahul

• YOU WANT TO ERASE ALL DATA FROM THE LAPTOP?

  I WANT TO RESTORE/SYSTEM RECOVERY, I WANT THAT ALL FACTORY SETTINGS. COMPUTER IS RUNNING SO SLOW AND 6 GB TO 80 GB LEFT NOTHING IMPORTANT ABOUT LAPTOP? ANYTIPS OR HELP? I ALSO HAVE A FULL VERSION OF WINDOWS VISTA, I WANT TO INSTALL. CURRENTLY, MY COMPUTER HAS WINDOWS VISTA BASED AMD 64 ATHLON X 2?

  Hello

  How to reinstall Vista

  an easy to follow the answer for you:

  follow these steps

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• After 10 attempt when erase all data are not checked

  I do not remember my password iPhone (although I typed in yesterday) and I've made attempts until my phone says to connect to itunes. I wanted another go so I reset my phone (hold down the power and home screen buttons) and he told me that my phone has been disabled for 1 hour. I know I definitely have not the "erase all data after 10 failed attempts" so I want to know what will happen if I do another attempt of my password now. Please help me I'm so worried!

  If you do NOT set to erase data, it is not cleared. However, if I remember correctly, the waiting period will increase after several attempts.

• component AF:chooseDate - how to disable all dates in the past.

  Hi, I need to disable all dates in the af:chooseDate component.

  I should probably use DateListProvider for that, but don't know how.

  Thank you.

  KT - thank you very much.

  My bad, I completely missed the af minDate property: chooseDate.

  Exactly what I needed.

• How to connect sql database to esxi to save all data from the virtual machine

  How to connect sql database to esxi to save all data from the virtual machine

  Please provide steps

  In simple terms, you cannot connect ESXi to SQL. Connect a vCenter SQL (Windows only).

  If you want to save all the data that is contained in your virtual machines, I suggest a backup solution.

  Suhas

• How to save data from the COM port to file?

  Hi all

  can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.

  I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab

  and so on... can anyone help?

  
  

• export data from the table in xml files

  Hello
  
  This thread to get your opinion on how export data tables in a file xml containing the data and another (xsd) that contains a structure of the table.
  For example, I have a datamart with 3 dimensions and a fact table. The idea is to have an xml file with data from the fact table, a file xsd with the structure of the fact table, an xml file that contains the data of the 3 dimensions and an xsd file that contains the definition of all the 3 dimensions. So a xml file fact table, a single file xml combining all of the dimension, the fact table in the file a xsd and an xsd file combining all of the dimension.
  
  I never have an idea on how to do it, but I would like to have for your advise on how you would.
  
  Thank you in advance.

  You are more or less in the same situation as me, I guess, about the "ORA-01426 digital infinity. I tried to export through UTL_FILE, content of the relational table with 998 columns. You get very quickly in this case in these ORA-errors, even if you work with solutions CLOB, while trying to concatinate the column into a CSV string data. Oracle has the nasty habbit in some of its packages / code to "assume" intelligent solutions and converts data types implicitly temporarily while trying to concatinate these data in the column to 1 string.

  The second part in the Kingdom of PL/SQL, it is he's trying to put everything in a buffer, which has a maximum of 65 k or 32 k, so break things up. In the end I just solved it via see all as a BLOB and writing to file as such. I'm guessing that the ORA-error is related to these problems of conversion/datatype buffer / implicit in the official packages of Oracle DBMS.

  Fun here is that this table 998 column came from XML source (aka "how SOA can make things very complicated and non-performing"). I have now 2 different solutions 'write data to CSV' in my packages, I use this situation to 998 column (but no idea if ever I get this performance, for example, using table collections in this scenario will explode the PGA in this case). The only solution that would work in my case is a better physical design of the environment, but currently I wonder not, engaged, as an architect so do not have a position to impose it.

  -- ---------------------------------------------------------------------------
  -- PROCEDURE CREATE_LARGE_CSV
  -- ---------------------------------------------------------------------------
  PROCEDURE create_large_csv(
      p_sql         IN VARCHAR2 ,
      p_dir         IN VARCHAR2 ,
      p_header_file IN VARCHAR2 ,
      p_gen_header  IN BOOLEAN := FALSE,
      p_prefix      IN VARCHAR2 := NULL,
      p_delimiter   IN VARCHAR2 DEFAULT '|',
      p_dateformat  IN VARCHAR2 DEFAULT 'YYYYMMDD',
      p_data_file   IN VARCHAR2 := NULL,
      p_utl_wra     IN VARCHAR2 := 'wb')
  IS
    v_finaltxt CLOB;
    v_v_val VARCHAR2(4000);
    v_n_val NUMBER;
    v_d_val DATE;
    v_ret   NUMBER;
    c       NUMBER;
    d       NUMBER;
    col_cnt INTEGER;
    f       BOOLEAN;
    rec_tab DBMS_SQL.DESC_TAB;
    col_num NUMBER;
    v_filehandle UTL_FILE.FILE_TYPE;
    v_samefile BOOLEAN      := (NVL(p_data_file,p_header_file) = p_header_file);
    v_CRLF raw(2)           := HEXTORAW('0D0A');
    v_chunksize pls_integer := 8191 - UTL_RAW.LENGTH( v_CRLF );
  BEGIN
    c := DBMS_SQL.OPEN_CURSOR;
    DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
    DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
    --
    FOR j IN 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
      WHEN 1 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      WHEN 2 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN
        DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
      ELSE
        DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,4000);
      END CASE;
    END LOOP;
    -- --------------------------------------
    -- This part outputs the HEADER if needed
    -- --------------------------------------
    v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_header_file,p_utl_wra,32767);
    --
    IF p_gen_header = TRUE THEN
      FOR j        IN 1..col_cnt
      LOOP
        v_finaltxt := ltrim(v_finaltxt||p_delimiter||lower(rec_tab(j).col_name),p_delimiter);
      END LOOP;
      --
      -- Adding prefix if needed
      IF p_prefix IS NULL THEN
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      ELSE
        v_finaltxt := 'p_prefix'||p_delimiter||v_finaltxt;
        UTL_FILE.PUT_LINE(v_filehandle, v_finaltxt);
      END IF;
      --
      -- Creating creating seperate header file if requested
      IF NOT v_samefile THEN
        UTL_FILE.FCLOSE(v_filehandle);
      END IF;
    END IF;
    -- --------------------------------------
    -- This part outputs the DATA to file
    -- --------------------------------------
    IF NOT v_samefile THEN
      v_filehandle := UTL_FILE.FOPEN(upper(p_dir),p_data_file,p_utl_wra,32767);
    END IF;
    --
    d := DBMS_SQL.EXECUTE(c);
    LOOP
      v_ret := DBMS_SQL.FETCH_ROWS(c);
      EXIT
    WHEN v_ret    = 0;
      v_finaltxt := NULL;
      FOR j      IN 1..col_cnt
      LOOP
        CASE rec_tab(j).col_type
        WHEN 1 THEN
          -- VARCHAR2
          DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        WHEN 2 THEN
          -- NUMBER
          DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_n_val);
        WHEN 12 THEN
          -- DATE
          DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
          v_finaltxt := v_finaltxt || p_delimiter || TO_CHAR(v_d_val,p_dateformat);
        ELSE
          v_finaltxt := v_finaltxt || p_delimiter || v_v_val;
        END CASE;
      END LOOP;
      --
      v_finaltxt               := p_prefix || v_finaltxt;
      IF SUBSTR(v_finaltxt,1,1) = p_delimiter THEN
        v_finaltxt             := SUBSTR(v_finaltxt,2);
      END IF;
      --
      FOR i IN 1 .. ceil( LENGTH( v_finaltxt ) / v_chunksize )
      LOOP
        UTL_FILE.PUT_RAW( v_filehandle, utl_raw.cast_to_raw( SUBSTR( v_finaltxt, ( i - 1 ) * v_chunksize + 1, v_chunksize ) ), TRUE );
      END LOOP;
      UTL_FILE.PUT_RAW( v_filehandle, v_CRLF );
      --
    END LOOP;
    UTL_FILE.FCLOSE(v_filehandle);
    DBMS_SQL.CLOSE_CURSOR(c);
  END create_large_csv;
  

• How can I force the Finder to show all files in a folder of Capitan?-instead of always having to click on "Show all" to see the full selection of files.

  How can I force the Finder to show all files in a folder of Capitan 10.11?-instead of always having to click on "Show all" to see the full selection of files.

  It is not often that I said ' what are you talking about"but" what are you talking about? "

  I do not know of all "show all" in the Finder. Can you provide a screenshot?

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• This feature erases any data on the mac?

  I use Mac mini end of 2012. OS X El Capitan

  I have a lot of data on it especially photos IPhotos and should ensure that I wouldn't lose all of the data with this method of recovery.

  It will erase everything if you choose to reformat (erase) the reader.

  Whatever the use of OS X Recovery, you must back up all your important data in a timely.

  You can use the Time Machine application in your Applications folder > use Time Machine to back up or restore your Mac

  This way if you have to reformat the hard drive at some point, you can restore your photos from a Time Machine backup.

• I have synced my phone on my desk before wiping the desktop drive, now wish to import bookmarks in sync on the desktop. I tried to 'replace all data on the computer with my Sync data', but nothing happens. Please guide me through it.

  All bookmarks are still on my mobile. I can see and access. When using the synchronization options, then clicking on the fact, absolutely nothing happens. The bookmarks are always on my mobile and not transferred to office.

  Hello!

  I am trying to understand the workflow in detail. Let me explain quickly what is the right process:

  1. Sync your phone to your desktop (you already did that)
  2. Clean your computer (you already did that)
  3. Follow these steps in the newly installed Firefox https://support.mozilla.com/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers?s=sync & r = 3 & as=s#w_what-if-im-not-near-my-first-computer

  That of all, make sure you have the key to Firefox Sync in order to access your Firefox Sync account again. Do not create a new or if not you will remove the data from the server. If you have lost your key synchronization, you can get it from your phone by installing the add-on on your Android device: https://addons.mozilla.org/en-US/mobile/addon/aboutsynckey/

  I hope this helps you.

• access XML data outside the charger function

  Hello

  I want to load my XML, wait the full loading and then be placed to access the XML data loaded in the major part of my program. I do so because I want to load and process, such as XML or superior to 10 in this project... Its here the code that I wrote

  Thanks for help

  import flash.net.URLLoader;

  var c:XML;

  var b:URLLoader = new URLLoader();

  function fxxml(): {URLLoader

  b.Load (new URLRequest ("testxml.xml"));

  Return b}

  fxxml () .addEventListener (Event.COMPLETE, processbase);

  function processbase(e:Event) {}

  var a: XML = new XML (e.target.data);

  trace (a)

  I could find my updated XML here could not access outside this function

  }

  I want to be placed to get the XML here outside the loadin function

  Why did you declare c? Just use it inside processbase, instead of one, and you can use it elsewhere...

  function processbase(e:Event) {}

  c = new XML (e.target.data);

  trace (c);

  }

• Why have I not of huge amounts of data in the "JUNK" and "INBOX" files in a subdirectory of "folder? Profiles/*.default/Mail/

  Today, I went looking for records in my computer containing files larger than 300 MB. To my surprise, two records that presented themselves are in... / AppData/Roaming/Thunderbird/Profiles/pt66rib2.default/Mail/mail. (my server). There are 355 MB of data in the "Junk" file (which has no file extension) and 577 megabytes of data in the "Inbox" file (which has also no file extension). When I open the files in the laptop ++, I found that the data is every email that's ever been in my Inbox. (Gee, I wonder if the it Department to the IRS has never thought to check there for lack of laws Lerner emails?) For the record, I suggest all my messages in my Inbox and 'Empty junk' into the Junk folder (in the Thunderbird e-mail program) every day. Why is-all data still here? What is the fastest way to remove or erase data?

  _ http://KB.mozillazine.org/Thunderbird: _Tips_:_Compacting_Folders

  http://KB.mozillazine.org/Keep_it_working_-_Thunderbird

• Writing data to extend the acquisition of data for the sampling rate high file

  These are the tasks that I have to do to take noise measurements:

  (1) take continuous data to USB 6281 Office, in a sample of 500 k (50 k samples at a time) rate.

  (2) save data continuously for 3 to 6 hours in any file (any format is OK but I need to save in a series of files rather than the single file). I want to start writing again file after every 2 min.

  I enclose my VI and pictures of my setup of the task. I can measure and write data to the file continuously for 15 minutes. After that, I see these errors:

  (1) acquisition of equipment can't keep up with the software (something like that, also with a proposal to increase the size of the buffer...)

  (2) memory is full.

  Please help make my VI effective and correct. I suggest to remove him "write in the action file" loop of consumption because it takes a long time to open and close a file in a loop. You can suggest me to open the file outside the loop and write inside the loop. But I want to save my data in the new file, after every 2 min or some samples. If this can be done efficiently without using Scripture in the measurement file then please let me know.

  Thank you in advance.

  This example here is for a single file and a channel, you should be able to loop over that automatically. The background commentary should be the name of the channel, no group namede the name of the channel in the control.