All data is not cause to the specified criteria. Although SQL is good

Similar Questions

• No results. All data is not cause to the specified criteria.

  Facts:
  OBIEE 10.1.3.4.0
  Oracle 10.2.0.4.0 Server 64-bit
  
  Two BIEE, a Windows and Linux servers, both using the same source of data (Instance ORCL01, table FACT_ACOMPANHA) table.
  
  
  
  The question is:
  
  Using the BIEE 1 repository, which is hosted on a server of Windows XP, I'm able to query all columns in the table, no restrictions.
  
  Using the second filing, hosted on another box (Linux Red Hat 5.2), when I interview one of the columns in table (CD_SISPRENATAL column, VARCHAR2 (11)), answers don't match any line.
  It returns the message: "no results. Cause no data to the specified criteria.
  
  If I add another criterion in the application (using the CD_SISPRENATAL and any other column of the same table) data are normally retrieved.
  
  I have to say, the CD_SISPRENATAL column is not a NOT NULL constraint, but most of the records in this table has this full column. There are few records with null values (460 on 130 430). There is no need to add guests, filters or whatever it is to get this message "error".
  
  Also, I use the same SPR file to two repositories. So, I guess that this is not due to differences in the configurations of the Rep.
  
  Is anyone sees no reason for this behavior?

  Here is the article on the opening of linux hosted RPD in online mode.

  http://OracleBI.soundvoid.NET/2008/10/open-a-Linux-hosted-repository-in-online-mode/

  and not your results problems, increase your level of logging and check the log files. So that you will know what sql is generated by the database, and also, you know if it is to hit the cache or not.
  -Madan

• OBIEE answers I want to change the Result (The specified criteria) No.

  Hello
  Greetings!
  
  
  After the creation of the report for the previous year I get no data is a correct result... instead of give the underside of thing I want to give my own personalized information... How to give that...
  
  pls help me...
  
  No results
  All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
  
  
  Book type is equal to AA, BA
  and BU Code related entities (MCRP05) is equal to FDC
  and AB exercise (AAAA) is equal to 2009
  and BU product Seg Code (MCRP08) is equal to FD
  Unit type Bus equals 08, 09, 10, 11, 14, 59
  
  
  Kind regards
  Mohan

  Hello

  Add N implies (another view-> No. results) in your layout from Mateur and change the display of Results number and enter your information in the text box.

  Thank you
  Oldia...

  For more information-

  http://bischool.WordPress.com/category/no-results/

  Courtesy of Kishore.

  Thank you
  Oldia...

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• date does not appear in the message list

  For the many emails I get from various accounts date does not appear in the list of messages, only time.
  It seems that these messages were received today, in fact they are old.

  Encountered this problem on 2 different PCs, 3 different email (gmail and own server) accounts.

  What could be the cause and how to fix it?

  IF you select Ctrl U _ on one of these messages, there is a right of the line at the top of the message
  -Killed Mar 25 10:09 2014 is a message that I received today. This is the date and time Thunderbird has calculated, he received the message

  Lower on the list

  Date is: sub form Date: Monday, March 24, 2014 23:32:50-0000

  These two are of the same email.

  E-mail uses time GMT so that the message has been sent to 24 March 2014 23:32:50 GMT.

  Thunderbird uses my locale information to know that my timezone is GMT + 09:30 by result Mar 25 10:09

  If your seeing odd times instead of dates, check that the information is correct as above.

  Note that if the sender is their computer set to 1970 date then you will get mail today from them with the date of 1970. Even if they think it's in October that is what will show their mail. This is most important when dealing with people with limited computer skills. They do not appreciate that the date and time zone information are really relevant to them at all.

  A favorite of spammers is to use a date in the future, so their junk is at the top of your e-mail list until you actually do something with it.

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• Z10 Z10 BlackBerry BlackBerry data are not compatible with the version of the software you are currently using

  Due to some problems with my BlackBerry Z10 I concerned with my service provider, after recommendation that I wiped my BlackBerry Z10, to update the OS security

  After all this. I am unable to restore completely, (Emails, Contacts, calendar and device settings cannot be restored)

  Link blackBerry screen: the data are not compatible with the version of the software that you are currently runnin

  Kindly guide me I'm too worried about my data, which is very important for me

  If you still get www.bberror.com//bb10-0015 and have not corrected:

  Read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...

• BlackBerry software blackberry 10 data is not compatible with the version of the software of the device you are currently using

  Hello

  My update of 10.3.1.1565 sali writing entry to the top on my phone.  so I tried the downgrade to 10.2.1 to do all my files are gone, however I thought I was smart by making this morning during the execution of 10.3.1.1565 a full backup before attempting the downgrade to os 10.2.1 through BlackBerry Link

  In any case I had to restore my device to 10.3.1.1565 and now when I try to do a restore by using the .bbb (backup) I created to present IE get the following error message:

  BlackBerry 10 data is not compatible with the version of the software of the device you are currently using

  versions of the software on my phone now and the version of the software when I did my backup are exactly the same 10.3.1.1565.  I am able to restore my user files and applications ect, because it proposes to make a partial restoration,., but my contacts and don't forget files are now gone.  I NEED THEM.  How can I get that back...

  Help, please...

  Thank you

  Hello

  I thought about it.  so I thought I'd post.  Apparently the BlackBerry pulled the 10.3.1.1565 update.  Anway don't know what happened over butI usng Shenshi and grabbing an update of another carrier, after that, so I'm now able to do a full restore using my old BBB file.

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

  whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

  (1) is the issue limited to only Corel Draw?

  I suggest you to restore the default values by pressing the F8 key while the program starts.

  Reference: File not found valid environment...

  http://CorelDRAW.com/forums/t/4156.aspx

  If the problem persists, I suggest you contact the link mentioned below for the best support.

  http://CorelDRAW.com/forums/

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

  Hello

  I get this error when you try to run the sample of cards on the corrugation Simulator:

  Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

  The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

  Someone else have this error and know why?

  PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

  PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

  Thank you

  The two directories (in the extensions directory and maps project directory) have permissions to 777.

  But you gave me an idea...

  It turns out that simply by putting

  "Packages".

  in setting output wasn't enough, I need the full path

  for example: "/ Users/username/RippleSites/Maps/packed."

  and presto, now it works!

  Thank you!

• Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

  Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

  Hello Charlie,.

  You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

  Kind regards

  BearPup

• The logged data is not loaded in the target table in cdc-compatible?

  Hello

  I tried with cdc-simple concept on single table.

  I had loaded, journaled table (only changed records) inserted in the simple target in cdc table. Its working fine.

  When I work on cdc-consistent and logged data are not loaded in the target table

  For this, I used the data model, it has 3 data stores. log the without option of data, its works very well.

  When I am trying to load tables logged in the target table in interface, its running fine.

  To do this, I chose "logged data only.

  Although I have not changed the records in the target table. target table is empty after the executed insterface.

  

  

  

  

  I chose the real option of insertion in ikm. But the logged data that is not inserted in the target table.

  Please help me.

  Thankin advacnce,

  A.Kavya.

  Hello

  You must EXPAND WINDOW and LOCK SUBSCRIBERS before consuming the CDC data:

  http://docs.Oracle.com/CD/E14571_01/integrate.1111/e12643/data_capture.htm#ODIDG283

  Subsequently, you unlock Subscriber and purge the log.

  Better to put a package to automate the whole thing.

• Get - VM: with "xyz" name VM is not found using the specified filters.

  Hello everyone!
  
  I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
  It happens that several cases vm does not exist in vCenter and returns me the below error:

  Get - vm: 04/07/2016-14:41:58

  Get - VM

  VM with the name "pxl1sso00008" was not found using the specified filters.

  No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

  + foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

  +	~~~~~~~~~~~~~~
  	+ CategoryInfo	: ObjectNotFound: (:)) [Get - VM], VimException)
  	+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM

  
  

  
  How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.
  
  Follow the .ps1 file:

  
  

  
  

  $vmlist = Get-Content C:\vmnames.csv
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
  {
  Add-PSSnapin VMware*
  Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
  [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
  if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
  }
      
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
       
  foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}
  

  Laurent,

  See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

  $vmlist = Get-Content C:\vmnames.csv  
  
  if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
      Add-PSSnapin VMware*
      Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
      [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
      if ($getVmwareSnapinErr.Count -gt 0) {
          Add-PSSnapin VMware.VimAutomation.Core
      }
  }
  
  $VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
  $arrVMInfo = @()
  
  foreach ($vmName in $vmList) {
      $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
      if ($vm -eq $null) {
          $arrVMInfo += New-Object PSObject -Property @{ `
              Name=$vmName `
          }
      }
      else {
          $arrVMInfo += New-Object PSObject -Property @{ `
              "Name"=$vm.name; `
              "Network"=$vm.Network.Network; `
              "IP Address"=$vm.IPAddress `
          }
      }
  }
  $arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation
  

• Play a suspended virtual machine, vmdk file not found or the specified file is not a virtual disk

  Hi, I have a problem that I can't solve with the usual methods.

  My data

  • software: VMVware Workstation 6.5.1 build 126130

  • Host: NB HP Compaq 2510p with 2 GB of ram

  • OS: Windows XP Pro SP3 5.12.2600

  I have a Win XP Pro SP3 computer virtual created for my work:

  • 6-5 - 7.0 VM workstation

  • RAM: 512 MB

  • Windows XP Pro operating system

  • Processors: 1

  • CDRom: Autodetect

  • Floppy: Autodetect

  • USB: present

  • Sound card: Autodetect

  • Display: Autodetect

  • HARD drive is divided into 2 GB files

  The problem lies in the HARD disk:

  • 40 GB declared

  • 0 MB recognized by the system

  My VM was functional complete. After a suspension

  • The State remains suspended

  • When I try to resume, a pop-up window will appear "file not found: IATROS VM.vmdk" go through it...

  the vmdk file exists (see my attached files).

  When I try to see the features on the parameters, appears "the specified file is not a virtual disk" and all data in the pop-up are unknown or missing.

  I tryied to use the vmware_vdiskmanager with the command vmware - vdiskmanager.exe - R 'e:\appo1\IATROS VM.vmdk' in vain also.

  I think that it is necessary to recreate a file descriptor for disc divided into 2 GB files.

  http://KB.VMware.com/selfservice/microsotes/search.do?language=en_US & cmd = displayKC & externalId = 1026266

  but, if we compare the contents of the VMDK file with the discussion in the article, there seems to be no problem of format or content.

  There are suggestions to solve the problem?

  can I await your response?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual