After 5 months of use... "You must allow replacing existing data to start using this device"

Similar Questions

• Satellite A110 PSABOE: after 9 months of use of overheating

  I have an A110 PSABOE who was very quiet during the first 9 months of use. It is now extremely noisy due to the fans, but also extremely hot.
  The problem is getting worse and my laptop cuts now after an hour or two due to overheating. Everyone knows this?

  Does anyone have a suggestion as to what might help?
  Thank you very much.

  Hi Lindsey

  Maybe someone could be scared to see this issue for the first time, but to be honest it s not unusual after 9 months of use of the laptop.

  Fans may not turn with a maximum yield due to dust and debris inside the laptop.
  Usually the cooling modules will have to be cleaned from time to time to avoid these overheating problems.

  So now you ask how to clean the fans? ;)
  Well, you could buy and professional tool like a jet of compressed air and may attempt to blow through the fans.
  Generally, it should help.
  If this isn't the case, I recommend strongly to contact and laptop technician who could help you clean the cooling professionally modules.

  Bye and good luck

• After 7 months of use, the letters on my computer laptop Audio Beats are fading. How do I get replacements?

  My Beats Audio Pavilion dm4 Notebook PC has touches of Red transparent backlight letter/number. The paint on the keys is fade after 7 months of use and many of the keys are no longer recognizable.

  Is it possible to get 'standard' for these keyboards replacement keys? Or will I just this problem once again in 7 months after the warranty replacement of these worn keys.

  HP could have solved this problem with a possible recall?

  How to get warranty with HP service if I am able to replace the caps key myself?

  Thanks in advance for any help possible.

  More that likely, the keyboard as a whole would be replaced.

  If it is under warranty, HP can be contacted at 1-800-474-6836 the Canada and the United States.  Otherwise, start here.

  The following link can help speed up the appeals process by collecting advance information.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Error "You need a WIA driver to use this device" when you try to open the Canon DR5010C

  Original title: get a Windows Image Acquisition driver to work with a Canon DR5010C attached by usb port

  I have already downloaded drivers TWAIN & SISI and still get the error message "You need a WIA driver to use this device" when I try to open the Canon DR5010C of the printers & damage.  I am looking for a driver interface solution.

  Hello JRWORK,

  You will need to contact Canon because they provide the drivers for your Canon DR5010C device.
  http://www.USA.Canon.com/Cusa/Office/products/hardware/scanners/high_speed_document_scanners/imageformula_dr_5010c_color_production_scanner#DriversAndSoftware

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Two monitors - I can't change "use this device as the primary monitor" because both are grayed.

  I just put my laptop (1) and (2) monitor to use together.  I like being a primary monitor (2) would monitor the "use this device as the primary monitor' however are grayed out.  I tried several things but cannot get to work.  Any suggestions? I am on Windows 7

  Hello, Olivia,.

  It depends on how you have the monitor Setup.

  You can get this option only when you select extend monitor instead of select two copies.

  If you want to set primary and secondary monitors, you must select the Extend monitors.

  For more information, see the article:

  Move windows between multiple monitors

  Setting up dual monitor: two screens are better than one

  Hope the helps of information.

• Selected "do not use this device" to TV HDMI for sound. Cannot find him.

  Windows 8.

  Went to the sound engineer. Clicked on the tv that I am connected to HDMI and opens the options for this. Selected "do not use this device.

  How can I get that back? I should have just changed between speakers and tv instead of that.

  Video works, but I just can't select the upcoming sound of TV more

  NVM. fixed. lock'er upward.

  right click a blank space under playback devices

• After 2 months of use under license can not enter in Photoshop

  After 2 months, to buy an incense again. (have 1 year license)

  You can also take a look at: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• Print server - you do not have sufficient permissions to connect to this device

  Hello all, received a tricky for you.

  Have several printers of various types and brands that are shared on a 08R2 print server
  All users have even permission sets.
  All computers built the same, running Windows XP, fully patched
  Print drivers are the latest universal drivers for any printer model to help, with most HP, Dell and Xerox.

  A user on computer A can connect to the printer without any problems
  User on computer B receives, you don't have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer A gets you do not have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer B can connect to the printer without any problems.
  User C can connect to the printer from any computer without any problem.
  User D can not connect to printer from any computer.

  Once, all users have been confirmed 4 times to have the same exact permissions. All user accounts have been re-created at least twice at this stage. All systems that have been tested have been rebuilt at least twice, the print server started as a 03R2 with this same problem and has since been switched to different materials and is now running 08R2 and still getting the same problem.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Does not touch the iPhone 6 after 18 months of use.  Apple Service Center is not able to solve the problem it could material being associated and returned the phone, now I'm stuck with this expensive junk, the Iphone above 6 serious problem?

  I am in India, I was using Iphone 6, 16GB, for the last 18 months, bought in Australia, progressively, the touch screen not responding. Then the problem started to happen frequently. I said, all ideas update, (9.3.2) reset, restore, etc., etc., nothing helped, finally the Apple so-called service center has confirmed that it is a hardware problem, is not repairable and advised me to return the phone and scrap it or to pay nearly 60% of the phone cost to get another phone as replacement. (It might be a refurbished phone).  As I see a lot of complaints in the blogs on the problems of the iphone 6, Apple has not taken any measure to solve my problem and trying to make more money on behalf of replacement... Now I'm stuck with such a pricey gadget... should I buy new Iphone?

  Sorry, but an iPhone can be repaired by Apple or a Service provider authorized Apple in the country of purchase. If you think of buying a new device, buy it in the country where you will use it will save you a lot of trouble if you need service.

  And, according to usage, a 16 GB model might not have enough free space left to work properly, which can also cause the phone to lag and unresponsive at times.

• Windows 7 not genuine after 1 month of use

  I bought my computer in a T-shirt shop that had improved their equipment.  It has Windows 7 Ultimate on it.  It has worked well for more than a month until that one day he began to say that the copy was not authentic.  Here are the results of the diagnostic tool:

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0xc004c4ab

  Windows product key: *-* - X92GV - V7DCV-P4K27

  The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =

  Windows product ID: 00426-OEM-8992662-00400

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7600.2.00010100.0.0.001

  ID: {4472412F-D071-4C75-81DF-23E6E184831D} (1)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Ultimate

  Architecture: 0 x 00000009

  Build lab: 7600.win7_gdr.100618 - 1621

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\User Name\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {4472412F-D071-4C75-81DF-23E6E184831D}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-004002S-1-5-21-63006231-2488550991-141139708Dell Inc.. OptiPlex 330 Dell Inc.. A03 20080219000000.000000 + 0005ABB3607018400FA04090409Time(GMT-05:00) Standard is03DELL B9K 109

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition

  Description: operating system Windows - Windows (r) 7, channel OEM_SLP

  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8

  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f

  Extended PID: 00426-00178-926-600400-02-1033-7600.0000-2762010

  Installation ID: 007365678802762642199066958422886440116094943776234950

  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338

  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339

  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341

  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340

  Partial product key: P4K27

  License status: Notification

  Reason for the notification: 0xC004F200 (non-genuine).

  Remaining Windows rearm count: 3

  Trust time: 2010-10-30 15:42:43

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C4AB

  Beyond: 0 x 0000000000000000

  Event timestamp: 10:18:2010 19:29

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current HWID of Hash: MgAAAAEAAwABAAIAAAABAAAAAgABAAEA6GG4b/hxGN3CtBYPavIKC0jTeKzQTOOUKoU =

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0x0

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table NameOEMID value OEMTableID value

  APIC DELL B9K

  FACP DELL B9K

  HPET DELL B9K

  STARTING DELL B9K

  MCFG DELL B9K

  SSDT DELL st_ex

  ASF! REFERENCE DELL B9K

  DELL SLIC B9K

  SSDT DELL st_ex

  SSDT DELL st_ex

  SSDT DELL st_ex

  Help!

  Start a new thread in the following Microsoft Genuine Advantage forum and copy / paste these data in the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/threads

  Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Or just shoot an email to piracy [AT] microsoft.com & tell them about your problem.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CS6 asking for serial key after 18 months of use

  I bought DW CS6 via the model of education and have happily used for 18 months. Yesterday attempted to load a TI to request a serial number of go for a free trial. I have read the forums, and it is a common problem. How to solve this? If not, can I get a refund? I also do not have a serial number on the packaging, rather a product Code.

  Hello Belinda,.

  This seems very strange, and then you should take a look at database of Adobe, to see what is stored/recorded on your accounts. You will find general information on your account Adobe https://www.adobe.com/account.html > see My productsView all the > these products are associated with your Adobe ID > name > serial number. [And to find your serial number have a look here http://helpx.adobe.com/x-productkb/global/find-serial-number.html > I've lost my serial number >] see comments.

  The last time Adobe suggests so too this activation https://helpx.adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-.

  If your problem persists, please click on http://helpx.adobe.com/contact.html and 'open' Please use the cat, I for my part had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  Hans-Günter

• Personal problem with the drive (1 TB) - disc now not recognized by PC after 4 months of use

  I bought this 1 TB PMD in July 2010 for my HP M7250uk with Windows XP desk top. This replaced my previous 320 PMD. It has worked well up to now and all of a sudden the drive is not recognized by my PC. I even tried it external connection with USB and electric connection, but still the same. My previous 320 GB drive still works today well using HP media Bay. Called HP support twice and calls for more half an hour, but not much progress to solve the problem. If someone has an idea of what could be the problem and how to solve it - would appreciate any help. It's very very frustrating.

  BTP1,

  Opening of the PMD will void the warranty by HP. If it is still under warranty, then request an RMA and send it back.

  But, I'd be curious to know the model number, and firmware has been in this case. (It's just me).  RETURNED!

  This problem has been known, as woodmaster1 notes, for a long time, but it relates to their firmware and specific model numbers. Personally, I have 2 affected readers ST31000340AS (capacity of 1 t), there are "bricks" and the other has "thuds". Both drives are under warranty, and I will send both back for repair.

  HP Forum Hot Post: http://h30434.www3.hp.com/t5/Hardware/Prevent-possible-Seagate-hard-drive-crashes/td-p/52526

  Link to Seagate: http://www.seagate.com/www/en-us/support/

  Affected Seagate drives by model and firmware: http://h30434.www3.hp.com/t5/forums/replypage/board-id/HardwareDPC/message-id/25488

  I have also 3 disks (capacity of 1 t) Seagate ST31000528AS, with firmware CC34 (1) or (2) CC38. None has problems.

  Just got 3 more ST31000528AS with CC38 firmware. http://www.Newegg.com/product/product.aspx?item=N82E16822148433 but I paid only $49.99 on sale.  Date of manuf. Aug 2010

  woodmaster1,

  As you have opened the case, what model and firmware, and date code did you find.  (Really curious).

  Date code calculator: http://www.bugaco.com/calculators/seagate_date_code.php

  In case your application on six drives of 1 t, I only have 1 installed on my HP8100CTO. I use the other via a docking station ESATA external, cloning of my installed drive and transfer videos to the Dell 518 (also using the ESATA docking station). Other readers to protect my HP of any possible disaster that I change the hardware and try Win7 ultimate upgrade.

• Says "Select another player file History" (after several months of use)

  I've been using history files with an external hard drive since obtaining my laptop Windows 8 at Christmas. Today, I get the message:

  Select another drive of history file - history of files can not save copies of all your files due to limitations with file system of your historical record of files. Press or click to select a different drive.

  The external hard drive has franco total departure 330 GB 40 GB. I know it uses the FAT32 file system and have a few ISO images that are more than 4 GB, so I removed those but still not the problem. There the error logs that I can look to see if there is a particular directory file/long path? Any other ideas?

  Thank you

  Chris

  Hi Chris,

  Try to convert the external drive to NTFS file system and check if the problem persists.

  These are the ways to convert to NTFS

   

  Method 1:

  Conversion to NTFS using Convert.exe

  (a) of the type command prompt on the start screen, according the the search results right click on command prompt and select run as administrator

  (b) in the command window, type help convert , and then press ENTER. Information on the conversion of FAT to NTFS volumes are made available, as shown below.

  

  Method 2: To convert a volume to NTFS from the command prompttry as follows:

  (a) of the type command prompt on the start screen, from the search results right click on command prompt and select run as administrator.

  (b) in the command prompt window, type: convert DriveLetter: / FS: NTFS

  For example, type convert D:/FS: NTFS would format drive D: with the ntfs format. You can convert FAT or FAT32 to NTFS volumes with this command.

  Important When you convert a drive or partition to NTFS, you cannot just convert it back to FAT or FAT32. You will need to reformat the drive or partition which will erase all data, including programs and personal files on the partition.

  You can refer to check your drive historical files errors

  You can also try the troubleshooting steps of:

  What happens if something is wrong in the history of the files?

  Please post with the State of the question.

• My images are covered by a fine screen; This after 6 months of use CS6 successfully. What is bad people?

  My images have started opening hidden by a screen microperforated today. I use Photoshop CS6 almost daily and have never seen it before. Everything looks OK in Bridge, but not in Photoshop. I spent ages looking for a solution, including my tutorial book. There just something simple, I know.

  Dave D

  Hello

  You probably have enabled grid.

  View > view > grid

  It could also be the grid of pixels if your zoomed in your document.

  View > display > pixel grid