HOWTO call "n" independent instances of 'Decimate (continuous) .vi"without putting instances of"n"of the VI on the block diagram?

Similar Questions

• How to call a second instance of the same VI?

  Hello

  I have a useful VI dealing with IO operations. To save some time, of what I would call the VI as a second instance do work at the same time. I created a sequence sub with the run option 'Use the new thread' and I called the Vi (a step of the sequence only). Execution time of the VI is about 20 seconds run Durin I called the subsequence and I carried on running my main sequence (parent). Since then 10 seconds to launch the subsequence (in the thread of sepatate I called the same VI as in the thought of subsequence the second instance will be created. However, instead of parallel work of the two instances of the same VI had to wait when mt subsequence end known call the VI th.

  So my question is, as in the topic: how to call a second instance of the VI even at the "same time"?

  Could you please tell me about the best approach to solve the problem?

  Any VI that you want to run in parallel must be paid also re-entrant, including screws.

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.

• DataGuard broker not starting not not instances after passage in the

  I've implemented dataguard broker.
  
  Primary (Server1)
  
  instance name: test
  dbname: sf_test
  
  Standby (Server2)
  
  instance name: test
  DB: test
  
  I want to do the test from server2 as main and server1 sf_test as before.
  
  DGMGRL > switchover to test
  Continue to pass, please wait...
  Operation requires the stop of the instance 'test' on database 'sf_test '.
  Instance closing 'test '...
  ORA-01109: database is not open
  
  The database is dismounted.
  ORACLE instance stops.
  Operation requires the judgment of the instance 'test' on the 'test' database
  Instance closing 'test '...
  ORA-01109: database is not open
  
  The database is dismounted.
  ORACLE instance stops.
  Operation requires the start the instance 'test' on database 'sf_test '.
  Start the instance 'test '...
  Unable to connect to the database
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  
  failed. You are no longer connected to ORACLE
  Please log in again.
  Could not start the instance 'test '.
  You must start the instance 'test' manually
  Operation requires the start the instance 'test' on the 'test' database
  You must start the instance 'test' manually
  Successful, the new principal is 'test '.
  DGMGRL > output

  Hello..

  Refer to Metalink Doc ID: Note: 308943.1 -automatic restart of databases over the failure of the transition to digital with ORA-12514 in DGMGRL

  >

  Cause:-the cause of this problem is that without the necessary entry listener.ora, DGMGRL is unable to connect to the databases once they were arrested during the failover operation.

  >

  [http://blogs.oracle.com/AlejandroVargas/gems/DataGuardBrokerandobserverst.pdf]

  Use Data Guard Broker?

  HTH
  Anand

  Published by: Anand... on November 1st, 2008 04:17:-added 2 links

• Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a!

  Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a! I have Linux Fedora 15 and I'm not the root. I spoke to the Manager and he said I should delete a file in the folder where firefox is installed and which can solve the problem. Can you help me?

  Thanks, Marius
  

  Upgrade your browser Firefox 8 and check

  • getfirefox.com

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.

• everytime I open my macbook it asks me to "Enter your password to continue using iCloud" and even when I enter the password, it is as it badly and within 5 seconds asking me to type it in again... What do I do?

  everytime I open my macbook it asks me to "Enter your password to continue using iCloud" and even when I enter the password, it is as it badly and within 5 seconds asking me to type it in again... What do I do?

  The iCloud in system preferences pane shows that you are connected?

• Design of railroad model - need a version update of a Trax program called the wiring diagram

  I need a version update of a Trax program called the wiring diagram

  John

  Try the following link

  http://www.AnyRail.com/index_en.html

• I need to get a certificate to continue using WI - FI how di I find the certificate?

  I need to get a certificate to continue using WI - FI how di I find the certificate?

  Original title: WiFi problem

  Hello

   
   
  1. who is the operating system installed on your computer?
  2. What is the exact error message that you receive?
  3. who is your Internet service provider?  Have you tried to contact them about this?
   
   
  Follow the steps mentioned below and check if that helps.
   
  Method 1: You can check if the router is configured for WPA and WPA2 connection:
  a. If the router is configured for WPA and the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA.
  (b) if the router is configured for WPA2, then the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA2.
   
   
   
   
  Method 2: You can manually disable authentication IEEE 802. 1 x. Subsequently, re - enable authentication IEEE 802. 1 x and see if the problem still occurs.
   
  See: If you use a NETGEAR wireless router, you can follow this link:
  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
  http://support.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP
   
   
  Reference: Use certificates for security and privacy
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cert_ovr.mspx?mfr=true
   
   
   

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• my cam continues to go out of focus most of the time. What can I do to solve the problem

  my cam continues to go out of focus most of the time. What can I do to solve the problem

  Review of the help/support on this site of cam manufacturers

• Windows 8 apps is not up-to-day, continue to show "Pending" when I look at the State of windows applications update 8

  Dear team,

  I use the laptop dell inspiron with windows operating system 8. Apps Windows 8 does not get updates, continue to show "Pending" when I look at the State of windows applications update 8, I haven't downloaded or installed all the other apps, but I'm trying to update the applications integrated Windows 8 came with the computer dell laptop. I have high speed internet. I installed McAfee total protection subscribed when the purchase of the laptop.
  Please help free for applications update of Windows 8.

  Finally, I found a solution. Go to troubleshooting (press win + w > then type troubleshooting). a window now opens in the office. Click on "solve problems with windows updates. Now click Next. Windows will search for solutions, but he can't find anything. Then, windows will ask if you want to try in administrator mode. Click Yes. Windows will find and fix the problem. That's all.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Could not load the LR 6 on my laptop - I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."  I downloaded, from the Adobe Web site and given the serial number when I bought L

  I'll put up a new Macbook Pro the retina, bought this week, and try to install the copy of LR 6 I bought in September 2015.  It is currently loaded on my old Macbook Pro.  I understand that my license allows me to install this on two machines;  This is particularly important now that I move from an old machine to a new one.

  I downloaded the complete file of the LR6, but when I try to install, I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."

  I gave the serial number under my account on the Adobe website and delivered when I bought LR 6 September 2015.

  It is said to "Select a product", but only gives me options of Lightroom 1-5, not 6.  My new LR 6 license is useless just 6 months after purchase?

  I opted to buy 6 LR on perpetual license rather than a subscription monthly CC, as my country's currency is devaluing rapidly and I need to be able to afford access.  But now Adobe does not seem to recognize the validity of the copy that I own.  In fact, it is difficult to find a reference to LR 6 on the Adobe web site.

  Can anyone help?

  Thank you

  It shows the message you have purchased an upgrade license, and it asks you to select the older version that you upgraded and provide older version serial number as proof that you are eligible to use the upgrade.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html