After a disk crash and a new motherboard, how can I turn off to allow a reinstall

Similar Questions

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• Why my OS took so much space and how can I turn off automatic Back-ups?

  Hi, I'm opperating on Windows Vista Basic Home Edition on top of a HP540 Tower, which has 160 GB hard drive.

  Except for the 20 GB Partition, I stayed with 129 GB to install a fresh on o/s.

  After installing my o/s and updates the 7Gig to clean Documents saved from after installation.

  I was left with 99 Go!

  Something wrong without a doubt!

  Even more, I'm losing memory on my hard drive like there is no tomorrow, 30 GB in 4 days!

  It seems every time I'm streaming videos, or even just to watch videos, an external hard drive.

  I lose about 1 or 2 GB!

  Using a number of antivirus programs, I scanned for a virus, but all programs concluded that the

  the system is clean and that there is no virus!

  This led me to believe that the system backup and restore several coppies of his car, then

  I have used the disk clean up to remove all but the most recent backup file.

  All of a sudden my disk space is increased from 69BG to 99 GB.

  I still don't know what happened to the other Go 20 or 21.

  Although this seems to be a difficulty, with in a few minutes that the backup has been busy writing far still and in

  15 minutes that I had fallen to 97.3 GB and deminuishing.

  Why my OS took so much space and how can I turn off automatic Back-ups?

  Thank you very much!

  Nothing wrong as far as I can see.  A Windows installation will take about 20 GB to 30 GB so it's fine, and you will lose even more space for virtual memory to system management file, hibernation, system restore points file and so on.  Although the "30 GB in four days" is perhaps a little on the high side, considering that you have just installed Windows, there are a lot of household, creating files and so forth go on these days.

  With the help of disk cleanup to delete these files from system restore is a bad choice, because they are created to ensure the security of your system and allow you to recover from any problems that may require them.

  If disk space is as big a problem to get a bigger hard drive and let the system restore to do its job.

• How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Original title: speech synthesis

  How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Hello

  Follow the steps below to disable text to speech in Windows Vista.

  (a) go to the section on your main screen where you see the time displayed.

  (b) it is called the "bar", all kinds of small icons are visible here, there's even a gadget of the small arrow that would normally point to the right if you have a lot of programmes to help you use windows.

  (c) "left click on"the small arrow in a circle - this will expand the list to display small icons, drip slowly mouse over the bar of 'system' in order to launch a pop - up of each icon, once you reach the icon that says something like "text to speech tool","make a clique right".

  (d) a pop-up list appears showing what options are available - option whatever go to "Properties" or "settings", "click on" this element gives.

  (e) a new Panel will appear - in select here the article that says something like "launch on startup", it should have a box next to it, that will be ticked or marked in some way - "click" this element so that it seems to be clear and followed by the button "apply" "click" the button "OK" - which should solve your problem.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tell-me-what-you-want-A-Beginners-Guide-to-Windows-speech-recognition

   

• Opening of FireFox and have a continuous boring police siren! HOW can I turn OFF? the closure of firefox, Mermaid disappears

  Opening of FireFox and have a continuous boring police siren! HOW can I turn OFF? the closure of firefox, Mermaid disappears

  This has happened

  Each time Firefox opened

  == This morning when I opened FieFox (May 21)

  It's the 30th anniversary of Pac - Man today, and the Google home page is a playable game of Pac - Man around the Google logo. My boyfriend had the same problem, so I went to Google and was like Hey, it's Pac - Man! And then the siren began. It plays fine on my laptop but for some reason that the music is stuck on his computer.

  All you have to do is to disable previews 'Cool' add on for firefox. Click 'Tools' at the top of the browser, go down to "Add-ons", go to the "Cool previews', click 'disable '. Restart firefox and it should be good!

• How can I turn off recognition of face and people in the library module

  How can I turn off recognition of face and people in the library module. I don't know how I turned it on

  Hi Stacy,

  Please click on your name in the upper left corner, and then Pause the face detection.

  Kind regards

  Tanuj

• How can I turn off the error 'no internet connection '? I am on wireless and my internet connection is often intermittent.  This popup is really boring.

  How can I turn off the error 'no internet connection '? I am on wireless and my internet connection is often intermittent.  This popup is really boring.

  Thank you

  you have to start the application of office cc, at most, once every 30 days.  and if you have an annual subscription, simply start it once all the 91 days.

  so, in your cc preferences, uncheck "Start on login" and close it.

• NB520 - Wifi and Bluetooth works fine but can not turn off

  I bought new toshiba nb 520, almost everything is OK except wifi and bluetooh on the netbook cannot be disabled

  I tried FN + F8 to activate the wifi but it does not work at all, the only way to turn off the wifi windows 7 uses the device for disabled Manager

  is not everything, bluetooth has the same problem, yes it can be turned off by free config and turn a red light icon in the system tray to show bluetooth is in the off State, but after 2-3 seconds the light become blue and the bluetooh is on

  so the summary is
  WiFi = works correctly, but cannot be disabled, except disabled it the windows Device Manager
  Bluetooth = works correctly and can be disabled, but it will be swicth on automatically in 2-3 seconds after it turns off

  I have tried many solution, I had the netbook bios update, reinstall the driver but still no luck
  can anyone here help me

  Hello

  It's really, really strange, I mean the BT and the Wlan can be turned on and off using the Fn + F8 key combination. He s strange that it does not work.

  To my knowledge the Fn buttons are controlled by VAP (value added package) and the Support of additional Flash memory card utility BT stack and Wlan driver must be installed.
  I would recommend following:

  -Uninstall the driver Wlan and BT stack
  -Uninstall the VAP and utility of Flash card support
  -Install CCLeaner and clean the registry (CCleaner is a free tool)
  -You must restart the computer after each step.
  - Then reinstall the driver Wlan and BT
  -Restart and install VAP and Flash cards
  -Restart the unit and check if BT and Wlan can be enabled and disabled.

  NOTE: Fn + F8 should be pressed several times disabled these functions.

• How can I turn off Acrobat 9 from a Windows XP computer?  And re-enable Windows 8?

  Can I turn off Acrobat 9 Pro from a Windows XP computer?

  Can I reactivate Acrobat 9 on Windows 7 or 8?

  Hello

  You can navigate to help > deactivate to deactivate Acrobat 9 machine Windows XP, you would not be able to install and reactivate it on Windows 8 but it is not a version compatible with Windows 7 and 8.

  Concerning

  Sukrit diallo

• My hard drive crashed and was replaced. I can't uninstall CS6 Master Collection to reinstall.

  Hey everybody!  I am new to this forum and would like some direction. My hard drive crashed and was replaced. I was able to recover some of the old drive and the technician put my apps on the new drive but they are not operable (error 1) and require reinstallation. For CS6 uninstall programs is found on the disk (they are just aliases"). They installed the new 10.11 OS on my replacement drive.  I have my serial number and installation disks, but can not uninstall the product safely. I tried Adobe Creative tool for cleaning of clouds, but applications are still there. I also tried to reinstall on the existing master CS6 Collection, but it is hindering and freezes. Help, please! I would be so grateful! Thank you!

  Hello

  Try to delete the files listed below if you want to remove adobe CS6 apps of your machine it should help:

  1-go to: Finder > Applications > utilities > (delete these two files - creative cloud Adobe and Adobe Application Manager, as appropriate)

  2 - right click on the Finder icon, then select the "Go - To" folder.

  3. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")-~ / library (it will open the folder of the user's library.)

  ~/Library > application Support > Adobe (this trash folder)

  ~ / Library > Cache > Trash all Adobe files and folders from here

  ~ / Library > Preferences > trash all Adobe files and folders from here

  4. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command, and then click 'Return' key. / Library (it will open the library system folder.)

  / Library > application Support > Adobe (this trash folder)

  / Library > cache > Trash all Adobe files and folders from here

  / Library > Preferences > trash all Adobe files and folders from here

  5 - restart the machine and empty the trash

  6 - Download and reinstall CS6 from here: download Creative Suite 6 applications

  Let us know if that helps.

  Kind regards

  Bani

• How can I turn off after the failure of the motherboard?

  My motherboard does not on my main desktop PC and I'm waiting for a new. I couldn't disable PS (CS5) and I fear that the new motherboard will be seen by Adobe as a new computer. Since I have already loaded on my laptop CS5, I guess I won't be able to use it on the repaired office. I have connected to Adobe 'Customer Care' to ask them about the issue, but I keep going round in circles. When I try 'contact us' under the appropriate heading I get sent to the first screen. Help please.

  Have a look here: Activation & deactivation help

• How can I turn off the CC on my old PC and I install on my new Mac?

  I just got a new Mac and need to know how to disable CC from my old PC so I can put it on my new computer. Thank you

  Just install the application of cc on your computer desktop, https://creative.adobe.com/products/creative-cloud

  you are limited to two simultaneous 'connections', so if you are already connected to two computers when you install on your new computer you will be prompted to disconnect from the other two (using your computer).  no need to start your old computer and disconnect.

  But if you transfer your old computer to someone else, you should logout of your cc desktop application on your old computer.

  as said you may be asked to do so by using your new computer, but if not, you can do so by using your old computer.

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

• How can I turn off What's New each time Firefox 4 begins

  I had to change my home page blank page, because every time I start Firefox 4, I get two tabs. One for my home page and the other for What's New

  http://www.Mozilla.com/en-us/Firefox/4.0.1/whatsnew/

  How can I disable this page open every time? Please write simple instructions if you know. Send me a link to change things does not work for me. Thank you.

  See the following for a few suggestions:

  • Firefox says it's just updated each time that it starts - how to fix
  • How to set homepage - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• How can I turn off the new sign-in warning on Windows in my Gmail account.

  Whenever I connect to my Gmail account on my laptop, I get a warning that says New sign-in Firefox on Windows with a list of activities, the IP address and all associated.

  How can I disable it?

  I know that it's for the safety of my Gmail accounts but I do not know which connects to my Gmail account and it's me.

  Y at - it an option to uncheck in my Gmail settings?

  Thank you

  Francis UK

  Problem solved.

  I created a filter with this search for messages and I check the Skip the Inbox (archive) and Mark as boxes to read.

• How can I turn off the beep sound on Num lock, cap lock, and scroll lock keys

  How can I disable the beep on the cap lock NumLock and scroll stop?

  There is a good chance that you can turn off the beeps by pressing the NumLock key for a little more than 5 seconds. Here's where the ToggleKeys setting are stored.

  Go to the Ease of Access Center Control Panel and click make the keyboard easier to use.

  

  Search for Activate the ToggleKeys in the section make it easier to type and uncheck Activate the ToggleKeys. You can uncheck turn on ToggleKeys by pressing the Numlock for 5 seconds more.

  Be sure to click on OK endangered.

  Addendum: more information in the Microsoft Accessability tutorial.