After a hard reset HotSync

Similar Questions

• Screen works only after a hard reset.

  Hello.

  I got this dv6220la of Pavilion with a strange screen problem.

  In normal use, the screen never lights up, all lights come on, I see the drive hard drives work, but completely black screen, not even the backlight remains on.

  If I keep the power button until the laptop turns off and then turn it on, while the screen works normally.

  Whenever I turn it off normally (press the power button or use the stop dialog box) will not work after turning on the screen and whenever I have the strength it will work normally until the next power off.

  What could happen?

  ----------

  When something does not work as it is supposed to, then it works as expected.

  You have to love how useful HP support forums are always =)

• Smartphones from blackBerry 8350i eception exception java.lang.NullPointerException after hard reset

  basic information:

  8350i

  v4.6.1.204 (Platform 3.0.0.73)

  Desktop Manager 4.7

  everything is good except that I was using two batteries, one in the phone and the other in a charger. When the battery is almost empty I swap with one charge naturally causing a hard reset.

  This procedure worked well for at least a week or two, until last month when I swapped batteries - after the hard reset, I had

  Eception exception: java.lang.NullPointerException

  I could make calls, but all other software were corrupted... practically nothing else worked... missing icons etc.

  tried all kinds of solutions, but the only thing that fixed it was a full-on device software erase/recharging, then a restore of data since the previous backup. at the time, I thought it was just something random and was happy to learn how to do a full charge of the software.

  then yesterday it happened again (even once, at the end of the security check immediately after the hard reset). now I'm afraid to swap batteries because it seems that every time I have hard reset it recharge a 10% chance (I guess) of corruption of software and a complete takes considerable time.

  If anyone else has noticed this? does anyone have a solution?

  can I change batteries without a hard reset; i.e. Exchange while that connected to the power supply? I have not tried this yet for fear of harming my BB.

  any help is appreciated,

  John d.

  15 seconds is too short period of time.

  It took at least a minute before returning the battery.

  Error you reported is related to badly written in device memory operating data.

  In most cases, helps to battery pull. But you must wait at least one minute before you put the battery on the device.

  When you do battery pull make sure that this device is not connected to any external device or the wall charger.

  In the event of battery pull does not help, I recommend to consider wiping the device memory.

• Restoration of hotsync after Hard Reset Palm Centro

  Hello

  My Palm Centro was freezing randomly and in particular whenever someone called me. As this was very annoying, I performed a Hard Reset of the device. Before I did I did a Hotsync to back up everything (or so I thought).

  Now when I do another hotsync after Hard Reset nothing is restored, the only things on the device that were there before are the photos that were on the memory card. All my Contacts, phone numbers, notes, calendar entries and everything disappeared. How can I restore them?

  EDIT: Ive since found all my contacts, calendar entries, memos, etc. in the application of "Palm Desktop" in Windows XP. How to I move from the computer on the Palm Centro?

  -Aussieguy

  When you hotsync it will ask for a user name, be they existing or invites you to create a new.

  you remember what username you assigned when you do the front hotsync.

  You also said that you can see your information in palm desktop, check the user name in the upper right corner where you see the user name.

  regardless of the user name displayed in the area where you can also see your data, this is the username correct to decide when you hotsync.

  now, your device is empty so kindly do the hard reset on it and then try to hotsync, but this time, you should be able to know what username to choose.

  Message is about: Treo 680 (unlocked GSM)

• Can't HotSync after Hard reset.

  T / X works fine for 11 months (even if it seems to go in soft resets more that I would like to), but it has recently become a warm reboot and then continued recycling the soft reset.  I couldn't stop recycling except by doing a hard reset.  Try to hard reset, so I was unable to make the HotSync, the message "connection could not be established.  Went on the Forum and must have tried every thing Forumees have already posted.  No chance!   I have a recent HotSync and also have a full backup NV, which when I try to use puts me in the now proverbial Soft Reset recycling.  I also cannot HotSync my M125 and get the same message "no connection".  However, some sort of a connection is underway because appear two PDAS in Device Mgr, while the T / X watch as it recharges when connected.  Am using Desktop 4.2, cleaned the pins of the connector, left the manna for the gods (unassisted) and also purchsed a new cable HS which happened yet (but probably not the problem since two PDAS have the same problem).

  Help!  My first-born to it who can help.

  To set up a repair of the TX, you will need to call the handheld computer help line.

  Here's the number for support handheld;

  1-866-935-7256

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• No Internet after hard reset.

  I hit the button to reset on my router, and now my computer & other devices cannot access the internet. I can connect to my router but don't have Internet. It was working fine earlier today until it was hard reset.

  I ran troublshoot windows and I got: "the network gateway is accessible, but Windows could not receive traffic from the internet."

  All my devices have finally got internet access after having new hard reseting my router and then put cycling my modem, router and pc. Thank you Eddie 956for is not giving up on yourself!

• Dell XPS 12 - will not start / turns on after hard reset

  Last night I was with my XPS w12 in laptop mode on battery and he finally went down to 7% of the capacity.  At this point, it turns off the display and I moved my office to connect the power adapter (thinking it would simply turn the display when there was enough power...  The screen never came back (I waited 15-20 minutes), but the battery has been recharged.  At that time, I tried a hard reset by holding the power button for 5 to 10 seconds.

  When I tried to turn it on, nothing happened.  No backlit keyboard, no screen, just the fan.  The light never came the switch either. So I tried an another hard reset with the same results.  I even tried to turn it on with the "D" button held down for on board diagnostics and got nothing more than the start of the fan.

  I thought it might be an overheating problem, so I let it set for an hour and tried again - none other than the fan. It seems that the laptop does not pass the initial diagnosis and not even up to the point where the bios starts to load.

  I really thought that my cell phone was dead and ready for use.  I took it in the office the next day so I could call Dell Support Pro. Just for fun, I plugged with the AC adapter and tried to turn it on - viola!  It started working again.

  I had this problem once before, and he began to work after 2-3 resets hard. I was working on a proposal when the laptop went down. I tried reset hard over a period of 4 hours with no result. It baffles me why it start OK the next day morning.

  I was wondering if anyone else has had the same problem.  I am running the A07 BIOS (the most common) and my 12 XPS is configured with 8 GB of memory and 256 GB SSD with an i7 and Intel wireless card.

  Any suggestions on this diagnosis? The hardest part is then if fails, the failure is total - you are unable to diagnosis. When she comes back, all right, and there is than any event in the event log that relate to the failure.

  OK - I narrowed down it to the following:

  When the laptop is "asleep", it will finally in power mode. It seems that connect a power adapter for the laptop at this point will enter a State of confusion, when the button is pressed, the laptop fan turns on but no light on the power button or on the keyboard – the screen remains blank.  Laptop fan works (it is very quiet - he must hold the phone to your ear to hear it).

  I don't know if the cause is a low battery or if the issue is simply with the State of the CPU to power down.  All I know is that when it happens, if I disconnect the power adapter and press and hold the power button until the fan of the laptop turns off, the hard reset allows him to come back normally.  If you leave the adapter attached, it will charge the battery but will not allow the laptop start.

  I said this experiment several times with the same result every time. I'm guessing that there is a bug in the BIOS that defines an error state that are resolved with the associated power Board. Do the hard reset without the adapter seems reliable to fix the problem.

• IPhone SE lights not after an appearance at the screen frozen, faded and an attempt to hard reset.

  I just took the new smartphone Iphone SE in April 2016. It worked perfectly fine for the months that I had it until last night. I was recording playing me the guitar, when I put the phone down with the camera open for a few seconds. When I went to get the phone upwards, the screen was frozen and colors have been melted. The multicolored lines appeared as well. I tried to close the application by pressing the home button, and when I tried to press the sleep button to access the lock screen, the phone went black. When I went to press the sleep button to access the lock screen, the phone opens the same screen frozen, multicolored as before. I panicked and hard reset the phone. I turn on is no longer the phone. No apple logo appears, as well as logos 'connect to Itunes '. I tried to restore the phone to factory via Itunes, but it was without result.

  Surprisingly, when I went to restore the phone, the second time, serial number has changed from a game of numbers and letters invalid "s/o," as if Itunes is no longer permitted to detect it as an iPhone. In addition, the phone is now considered as a completely new system on Itunes, which I don't know is normal.

  I made an appointment with the Applestore for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Any comments would be greatly appreciated.

  -B.S.

  I made an appointment with the Apple store for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Your phone is not hacked and all the malware only you could catch is malicious cookies in Safari or other browsers that are removed easily by clearing their cache. I suspect you have a hardware problem, nothing more, that should solve the Apple store.

• OfficeJet Pro 8500 Wireless: Hard reset after automatically adjustments between each printed page?

  I have a HP Officejet Pro 8500 Wireless, mainly connected with WiFi for PC Win7.

  The problem is that the printer automatically adjusts between each printed page! How can I fix it? Is this possible with a hard reset?

  Thank you for your answer!

  I think that the cable of the red ink has been blocked, but it's fixed now.

• Digitizer of T2 frozen after the soft, hot and hard resets. Cannot have to calibrate at all.

  Sometimes my T2 must be recalibrated. I downloaed DigiFix a few months ago and it seemed to help a little. I hot sync my data last night and everything was fine. This morning I couldn't tap my screen to access anything whatsoever. I tried to thoroughly clean the edge of the screen, gently cleaned the screen (no visible damage to the screen noted), performed a reset (which usually works), software reset hot, followed by a warm reboot and, finally, a hard reset (data kept) followed by a warm reboot, then the big one, a hard reset with data loss followed with 5 soft resets in a row. I found the Forum a T2 update I downloaded and is ready to be installed when I got hot then sync.

  The unit is now fixed with the x in the start position in the upper left corner. Despite my efforts to knock quietly all around the X, I just can't get to recalibrate or even down the calibration screen. If I could just go to any ordinary screen, I could recover my data and install this update of T2.

  I also downloaded Pocket DVD studio a week ago and have been able to download the .avi files to watch videos on my Palm. I works perfectly. I think I still have the original Kimoma player on my T2, but never really like him. Can someone help me please? This update of T2 is supposed to help according to information I found in the forum... Thank you very much!

  Try to clean dirt that can accumulate between the bezel case and digitizer with the folded corner of a piece of copier paper. Do not go under the greater than 2.5 mm bezel. If you use a screen protector, it could have migrated under the window causing a tap screen Ghost and the substitution of all what you type. Remove it.

  If still no joy, perhaps your digitizer is worn and it is time to replace. pdaparts.com and usedpdaparts.com sell replacements and can install them for you, for a nominal sum of service.

  Message relates to: Palm TX

• 17 - k250CA: HP won't turn on, tried the Hard Reset still nothing system is 9 months old

  Afternoon in the hope of getting assistance, I tried to call tech support 4 times they keep telling me they ship me a box to send them back up after fustrating many hours and days away I decided to reach out to see if there is something, someone can help me with this

  System ran great the next morning about 2 months ago, the computer turned off just when I go to re start it I get no respone so I have some research the other night on a HARD RESET I finished it now when I press the power button system starts then shows the HP screen and stops just out of luck and more now he lights Please note that in this case the led turns off even when the charger is always plugged

  If I unplug the charger and plug it back I will get the led on the demonstration we have power/charging with a orange place any help would be great I have I need this for my school project due and I spend a lot of money on this computer and the fact that technical support phone call to give me same run me tracking code so that it shows waiting for microphone and HP still 2 months now I just need this work yet once

  Hi @BigDanPtbo,

  I've increased your question to the appropriate team.
  
  Please take a moment to read the HP privacy policy at http://www8.hp.com/us/en/privacy/ww-privacy.html

  Please let me know if this help solve the problem by marking this post as accept as a Solution.

  Thank you.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• Hard reset does not not with 9.3 update

  With the new update, I can't hard reset my iPhone. Siri does not work all the time. Sometimes when I reset hard my phone unlocks even if I'm not using my footprint.

  You could try these:
  

  
  

  1. Restart: press start/stop button until the Slide to Power Off slider appears, select Slide to Power Off and after it stops, press on On / Off button until the Apple logo appears.
  2. Reset: press the home and On / Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
  3. Restoration: connect your iPhone to iTunes on your computer, backup, and then select factory restore

• How to perform a hard reset.

  Although he can't be guaranteed to solve printing problems, a Hard Reset can solve many of them and is often a good first step.  Try following the steps in order.

  1. Unplug all cables and cards of memory in the printer.  Unplug the power cable, directly from the back of the printer when the printer is still on.
  2. Unplug the other end of the power cord.
  3. If there is a power supply on the power cord, disconnect one end and reconnect it.
  4. After 60 seconds, plug it directly into a wall outlet ( not a surge protector or battery backup ).
  5. Connect the power cord to the back of the printer.
  6. The printer should automatically feed back upward.  If not, turn it on with the power button.
  7. Try to make a photocopy (if your printer is a printer all in one) before you connect the cables from the printer.
  8. Connect all other cables to the printer.

  If this solved your problem, no other troubleshooting is necessary.  You can take additional measures if necessary, but it is often a good first step.

  It is recommended that the printer be connected directly to a wall outlet to ensure a constant level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  Scroll down to the previous post for the reset instructions.