Restoration of hotsync after Hard Reset Palm Centro

Similar Questions

• Can't HotSync after Hard reset.

  T / X works fine for 11 months (even if it seems to go in soft resets more that I would like to), but it has recently become a warm reboot and then continued recycling the soft reset.  I couldn't stop recycling except by doing a hard reset.  Try to hard reset, so I was unable to make the HotSync, the message "connection could not be established.  Went on the Forum and must have tried every thing Forumees have already posted.  No chance!   I have a recent HotSync and also have a full backup NV, which when I try to use puts me in the now proverbial Soft Reset recycling.  I also cannot HotSync my M125 and get the same message "no connection".  However, some sort of a connection is underway because appear two PDAS in Device Mgr, while the T / X watch as it recharges when connected.  Am using Desktop 4.2, cleaned the pins of the connector, left the manna for the gods (unassisted) and also purchsed a new cable HS which happened yet (but probably not the problem since two PDAS have the same problem).

  Help!  My first-born to it who can help.

  To set up a repair of the TX, you will need to call the handheld computer help line.

  Here's the number for support handheld;

  1-866-935-7256

• Smartphones from blackBerry 8350i eception exception java.lang.NullPointerException after hard reset

  basic information:

  8350i

  v4.6.1.204 (Platform 3.0.0.73)

  Desktop Manager 4.7

  everything is good except that I was using two batteries, one in the phone and the other in a charger. When the battery is almost empty I swap with one charge naturally causing a hard reset.

  This procedure worked well for at least a week or two, until last month when I swapped batteries - after the hard reset, I had

  Eception exception: java.lang.NullPointerException

  I could make calls, but all other software were corrupted... practically nothing else worked... missing icons etc.

  tried all kinds of solutions, but the only thing that fixed it was a full-on device software erase/recharging, then a restore of data since the previous backup. at the time, I thought it was just something random and was happy to learn how to do a full charge of the software.

  then yesterday it happened again (even once, at the end of the security check immediately after the hard reset). now I'm afraid to swap batteries because it seems that every time I have hard reset it recharge a 10% chance (I guess) of corruption of software and a complete takes considerable time.

  If anyone else has noticed this? does anyone have a solution?

  can I change batteries without a hard reset; i.e. Exchange while that connected to the power supply? I have not tried this yet for fear of harming my BB.

  any help is appreciated,

  John d.

  15 seconds is too short period of time.

  It took at least a minute before returning the battery.

  Error you reported is related to badly written in device memory operating data.

  In most cases, helps to battery pull. But you must wait at least one minute before you put the battery on the device.

  When you do battery pull make sure that this device is not connected to any external device or the wall charger.

  In the event of battery pull does not help, I recommend to consider wiping the device memory.

• No Internet after hard reset.

  I hit the button to reset on my router, and now my computer & other devices cannot access the internet. I can connect to my router but don't have Internet. It was working fine earlier today until it was hard reset.

  I ran troublshoot windows and I got: "the network gateway is accessible, but Windows could not receive traffic from the internet."

  All my devices have finally got internet access after having new hard reseting my router and then put cycling my modem, router and pc. Thank you Eddie 956for is not giving up on yourself!

• Dell XPS 12 - will not start / turns on after hard reset

  Last night I was with my XPS w12 in laptop mode on battery and he finally went down to 7% of the capacity.  At this point, it turns off the display and I moved my office to connect the power adapter (thinking it would simply turn the display when there was enough power...  The screen never came back (I waited 15-20 minutes), but the battery has been recharged.  At that time, I tried a hard reset by holding the power button for 5 to 10 seconds.

  When I tried to turn it on, nothing happened.  No backlit keyboard, no screen, just the fan.  The light never came the switch either. So I tried an another hard reset with the same results.  I even tried to turn it on with the "D" button held down for on board diagnostics and got nothing more than the start of the fan.

  I thought it might be an overheating problem, so I let it set for an hour and tried again - none other than the fan. It seems that the laptop does not pass the initial diagnosis and not even up to the point where the bios starts to load.

  I really thought that my cell phone was dead and ready for use.  I took it in the office the next day so I could call Dell Support Pro. Just for fun, I plugged with the AC adapter and tried to turn it on - viola!  It started working again.

  I had this problem once before, and he began to work after 2-3 resets hard. I was working on a proposal when the laptop went down. I tried reset hard over a period of 4 hours with no result. It baffles me why it start OK the next day morning.

  I was wondering if anyone else has had the same problem.  I am running the A07 BIOS (the most common) and my 12 XPS is configured with 8 GB of memory and 256 GB SSD with an i7 and Intel wireless card.

  Any suggestions on this diagnosis? The hardest part is then if fails, the failure is total - you are unable to diagnosis. When she comes back, all right, and there is than any event in the event log that relate to the failure.

  OK - I narrowed down it to the following:

  When the laptop is "asleep", it will finally in power mode. It seems that connect a power adapter for the laptop at this point will enter a State of confusion, when the button is pressed, the laptop fan turns on but no light on the power button or on the keyboard – the screen remains blank.  Laptop fan works (it is very quiet - he must hold the phone to your ear to hear it).

  I don't know if the cause is a low battery or if the issue is simply with the State of the CPU to power down.  All I know is that when it happens, if I disconnect the power adapter and press and hold the power button until the fan of the laptop turns off, the hard reset allows him to come back normally.  If you leave the adapter attached, it will charge the battery but will not allow the laptop start.

  I said this experiment several times with the same result every time. I'm guessing that there is a bug in the BIOS that defines an error state that are resolved with the associated power Board. Do the hard reset without the adapter seems reliable to fix the problem.

• Trying to Hard reset Palm Treo 500v

  If you follow the instructions online - press and hold the power button, remove the battery and replace it, I can't do the screen to resurrect to continue the procedure.

  When I remove the battery, it is as if the mobile turn OFF.

  Any suggestions how to solve this problem or is it useless?

  I tried this is because incoming TEXT MESSAGES, when I read them, open an empty folder of DRAFTS

  Suggestions, appreciate what happened, if I can fix it, or not.  Thank you.

  To Hard Reset your phone, the user guide provides a different process than these online instructions that apply to other phones.  Check here, at page 260:

  http://www.hpwebos.com/Europe/en/support/handbooks/Treo500v_Handbook_en.PDF

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• iPhone iOS 6 9.3.1 still sluggish after hard reset

  iI tried a couple reset hard (I think) but my iPhone 56 GB 6 of 20 GB of space left is super slow.

  especially when searching for contacts or make telephone calls.

  for example sometimes type a phone number translates into no number or delays as long as 3 to 5 seconds or more.' ideas?

  Thank you

  This is a forced reboot. Maybe this will help.

  Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

• Restore a RN102 after factory reset

  I plan to refresh my RN102 after sabotaging the snapshot files. It has two 1 TB drives in a RAiD1 configuration and currently has 20 GB of space. I could not easily tell how much of that was held less than a year of snapshots so I tried to remove them manually by allowing instant access, and then enter the sharing with a Windows PC and by deleting the oldest snapshot files. Needless to say this has mixed results. My free space has not changed, and snapshots always appear in the timeline of the RN102. (Yes, I'm a noob NAS.)

  I am considering a vertical expansion by replacing the disks 1 to with 3TBs (current sweetspot for $/GB on red WD.) I have two drives external usb 1 TB I use to alternate backups that I will also switch to 3 TB.

  (1) is it likely to back up the current configuration of the RN102, restore the default settings, replace the disks with 3 TB units, restore the configuration saved in the RN102, then copy saved files for actions on the 102 refreshed in place?

  (2) would it clean up the mess I made out the clichés (I don't mind losing the 'old')? I disabled snapshots on all stocks for the moment until I make this move.

  (3) is there a kind of Moore's law that size _and_ file number will double every year? ;-)

  -NASklr

  It would have been preferable to delete snapshots of the web user interface.

  NASklr wrote:

  I am considering a vertical expansion by replacing the disks 1 to with 3TBs (current sweetspot for $/GB on red WD.) I have two drives external usb 1 TB I use to alternate backups that I will also switch to 3 TB.

  (1) is it likely to back up the current configuration of the RN102, restore the default settings, replace the disks with 3 TB units, restore the configuration saved in the RN102, then copy saved files for actions on the 102 refreshed in place?

  Yes, but also to uninstall all apps that you installed before saving the configuration. In addition, reinstall them after you restore the configuration.

  (2) would it clean up the mess I made out the clichés (I don't mind losing the 'old')? I disabled snapshots on all stocks for the moment until I make this move.

  Yes.

  (3) is there a kind of Moore's law that size _and_ file number will double every year? ;-)

  All data is growing faster than Moore's law. Although this means not yours must of course.

• HP Officejet Pro 8600 more won't copy even after hard reset

  HP Officejet Pro 8600 Plus the Windows 8 operating system

  Will be printed computer; you scan documents & save on computer. will NOT be printed on the device.

  Stop printer; unplugged from the wall and the back of the unit. holding the power button for 60 seconds. reconnected; unit began.

  Document placed on the glass; Press copy; hit black; Unit pulls the sheet of paper; device scans the document (squeaks when scanning); After the period of time, it spits out paper & readings 'canceled copy', but do not erase or return to the home screen.

  Help!

  Hello

  Please check your Inbox for private message for the reset, I will send you.

• Anyone who is familiar with the Mac... need help after hard reset

  When I connect the phone to my macbook, the folders and applications before rebooting always appear in the finder window?  They do not appear on the phone (at least I can't find them).  My watch SD card a total space of 14.83 space of 14.46.  The phone made a sort of backup before you reset it? If so, can I safely delete the info... How?  I already copied my pics and contacts and don't want original content on the phone.  Thank you...

  Post edited by: dolelo

  Your question is hard to understand how it is formulated. If I understand correctly;

  you reset your droid to plant (i.e., a thorough cleaning)

  When you connect via USB cable installation, the previous that were on your SD card items. Is this correct?

  If so, a reset does NOT clear your SD card.

  I understand that you may receive hope.

• I've restored the Favorites after the reset of firefox. Now when I'm trying to bookmark a page any of the restored files appear. How can I fix it?

  detail is in the question

  Hello (sorry for the late reply) surgeon

  I have advice to follow the explanation given by cor - el, HOWEVER.

  as it jumps immediately to a difficult explanation, starting from the principle that there is a serious fault on your side, I want to ask you first try to solve on an easier way, as the issue at hand may not be so great at all.

  It could very well be that you click on the 'star -' to add a bookmark and then not see your choice records appear.

  -If this is the case, the solution is very simple: when you want to add a bookmark, click on the "file" and then select "choose folder" option (see photo) after that you'll have to find the place where you place the file once again and then select the folder.

  next time you click on the 'star' icon it will show this folder gain and you must repeat this step to reappear the other files in the same way.

  If this did not help you, then I advice to follow 'cor - el' most advanced sound solution.

• Challenge - can not send SMS after hard reset

  Well well... the title says it all... I just reset my Defy because he used failed and it was slow as hell.

  It's still slow, but faster, and it has not crashed for the last 4 days. The big problem: I can't MORE TEXT! I can receive them but cannot answer.

  I have already contacted the support of Telus, and they don't know what's going on... I'm really throwing in the wall... I want to spend the money on another phone only next year.

  Well well well! Problem solved!

  I went to the Telus store for some services. We changed the SIM card, without change, SMS does not... Oh!

  We called the technical service and a beautiful tricks comes to the form and that's what everyone should do with the Defy: ERASE ALL SMS in YOUR CELL, and THEN RESET THE PHONE. It's not more complicated than that.

  My cell now, still works with the material of bugs, but work.

  Thank you nicole for your time

• Compaq Presario CQ62 out mode 'sleep', even after hard reset

  I have a laptop Compaq Presario CQ61-411WM. He won't have fashion 'sleep'. I removed the battery and the power supply. When it connect every thing upwards. And run it, the light flashes on the laptop. No matter how many times press. It won't wake up.  I can't boot my laptop. Can someone give me a solution to this problem?

  Hi melvingene, welcome on the basic behavior of HP you describe is more than a failure to market, as opposed to stuck in mode 'sleep'. With the flashing lights, it might alert you to a specific hardware problem. Try the troubleshooting described in this paper: computer does not start and the lights blink or the computer will beep

  If you do not started, you probably encounter some kind of hardware failure.

  Let me know how it turns out.

• Palm Centro keeps restarting

  I just performed a Hotsync operation and my Palm Centro keeps restarting; I guess due to the installation of the software.  How stop the reboot and restore my Centro to its previous state?

  You will need to start over again with a Hard Reset, then synchronize with your old username after making a few changes to the name of a special folder on your computer.

  On a XP box it to: C:\Program Files\Palm\ your HotSync name account short \Backup.   Name the folder of backup to anything else (for example \Backup_old).

  This will allow all the data back on your phone PIM, but none of the third-party software that may be causing the problem.  HotSync is complete, you can start to reinstall the third-party programs one by one, seeking the return of the problem after each installation.

  If you have a strong idea about a program that caused the problem, do not install it!

  How hard reset a Palm Centro.

  Go to http://kb.palm.com and enter "Solution ID" number 45050.

  In short:
  -hard reset
  -Locate the backup under Palm Desktop folder folder
  -Rename in backup_old
  -synchronization, select old id. This will bring back PIMs (calendar, Contacts, tasks and Memos) but no settings or programs
  -Reinstall the applications one by one AFTER having checked that they are compatible with the device target.

  WyreNut

  Message relates to: Centro (AT & T)