Hard reset does not not with 9.3 update

Similar Questions

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!

• HP Pro Book 450 G1 turn not away and hard reset does not

  Hi all

  My new HP Pro Book 450 G1 will not activate to return, and a blinking next to the AC adapter when I press the power button. I tried the method proposed reset elsewhere on this site (e.g., out of battery and other external sources, unplug, hold down the power button for at least 15 seconds, etc.), but it does not work. Another suggests about how to fix this?

  Thank you!

  -JS

  Do not consider this issue. I realized that I was with my other computer power cord... stupid mistake. Thanks to all who helped to think of a solution - I hope I have to not inconvenience you too. My HP now works correctly.

• HP 6810us laptop does not start. Hard reset does not

  Hi people,

  Need your help. My HP dv6810us notebook is not initialized. I tried the hard reset as suggested in these forums, but his does not work. Would appreciate if you can let me know of other options.

  Its no more warranty and HP directed me on these forums. My OS is windows vista.  I can go well in the system implementation (F10).

  I would like to know what are my next steps? Start the laptop?.

  Thank you

  Milind

  Hello

  You are welcome

  You can create a bootable copy of Ubuntu on a USB - just follow the guide here.

  Kind regards

  DP - K

• Drive external HARD NTFS does not work after the update.

  I use a drive Seagate Backup of external Neurofibrillaire degeneration. After updating to Mac OS Sierra drive is simply not acknowledged at all. I tried on another MAC with El Capitan and works very well. Any solution?

  lirioandre

  try to open disk utility and see if it "sees" the drive.

  If she "sees" the drivr then go to the finder preferences and deselect the hard drives and external drives in the menu.

  Restart your Mac.

  This sequence has worked for me.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• my hard drive does not work, I can not download my antivirous

  my hard drive does not work, I can not download my antivirous

  Here are a few articles with possible solutions and its fix for the hard drive problems.  Maybe at least will help any problems you encounter.  I could have provided more targeted recommendations if you had provided more information about what the problem is exactly, when he started, the manufacturer, make and model of drive, how the player does not work - is that it recognized by the system, it appears in Windows Explorerr, the door opens when you press the button...  If the following text does not, provide this and more information about the problem and your configuration maybe we can provide additional assistance.

  Compliments and thanks to the spirit of another thread:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.microsoft.com/gp/cd_dvd_drive_problems - A Mr Fixit

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Image Count Reset does not?

  It is strange to ask a question here I'm usually the one answering them ;-)

  But in any case, is there a problem with image monthly account reset does not to the 10 of every month? Added the subscription in June and he has yet to reset. Anyone else having this problem?

  Hi Brad

  Thanks for all your help on the forum of Stock!

  Let me see it for you.

  Kind regards

  Bev

• I can't log in to my account to Mozilla, and Password Reset does not work.

  I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
  and password reset does not work. Here is one of my themes:
  https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
  my email: [email protected]

  Support for the site Add - ons are here:
  https://discourse.Mozilla-community.org/c/Add-ons

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Factory reset does not work

  I have a Nighthawk X 8 I bought two months ago. Up to today (March 7), it worked fine. Today I came home and found it did not work. I tried to access it via routerlogin.net, nothing worked. I tried factory reset using a toothpick about 5 times now, but it doesn't seem to matter. my computer (connected via ethernet) does not allow me to set it up, and I'm not wireless. The power button remains mostly orange, but it seems resets automatically once in a while.

  I tried to call customer service, but they hung up on me while starting to record my router midsentence. I'm afraid I'll need a RMA number, unless someone can tell me why reset does not work. I tried to do it for 8 seconds (directions say that), longer, several times, while it was turned on, turned off, both, etc. None of this helps.

  If I can't get the factory reset to work, is there a way to set up an RMA number without appeal? After the initial CS hangup, I was told that I would be on the phone for an hour, waiting for relief.

  I ended up doing an RMA number. Got my new unit and it is working fine now. If all goes well, he will not leave in like the last 2 months...

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky