After adjustment of the sensitivity of the effects

Similar Questions

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• Problem with the height/width automatic after you apply the effect

  Hey guys,.

  I have a panel that automatically resizes after some other materials is added. All the time there are a scale effect. Whenever I move the mouse over one of these children they zoom in and there, the height and width of the parent container is resized automatically.

  However, I have a button reduce to this one with a Resize effect. I can resize the full container to a size of reduction (for example 40 x 40), but when I resize returns with the same effect, the Panel doesn't do not automatically resizes with added children more.

  I did not define special properties on the Board early, but a property must be different now. It is not "automatic" and the "percentageWidth/height" is not working correctly because this command will cause the Panel stretch the full scene. Any suggestions here?

  Hello

  What effects is usually that they value explicit width and height of an element. This means that before you minimize the container, these values are not defined. When you reduce the container, the explicitWidth and explicitHeight are set. Normally, a provision or a container will size the component with setActualSize() or setLayoutBoundsSize(). It does not lock the component in an explicit state.

  Sometiems after effect of that speech.

  myComponent.width = NaN;
  myComponent.height = NaN;
  

  This will reset the explicit values Nan and force the component available to re-measure and setting page on based on her preferred sizes. In your case, before that happens the effect of reducing

  Mike

• Get the UAC invites even after adjustment of the never notify

  Whenever I start my computer I get a message asking me if I want to allow a program to make changes to my computer.  The program is Windows NT.  I think that Windows NT is a very old Microsoft program since the 1990s.  I have no need.  If I click Yes, no, or X window disappears, but the message comes back the next time I start my computer.  I checked my user account control settings.  I put it in the second position of never warn me, which is not recommended.  It does not solve the problem.

  Please help me get rid of this annoying message.

  Original title: user account control

  Hello

  UAC is a security measure that helps protect the security of your computer.

  You must not be looking for UAC in AutoRuns - you must be looking for the program
  the origin of the problem. You want to remove Registry Reviver may cause problems and difficulty nothing.
  Troubleshooting requires some trial and error.

  See this link (the other two in the initial response are to help in the removal process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  These could also help AFTER using the above method:

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7
  The problems that the programs cannot be installed or uninstalled http://support.microsoft.com/mats/program_install_and_uninstall/en-us

  Microsoft Fix It: Installation of program & uninstall (tutorial) - video
  http://www.YouTube.com/watch?v=5tTFs237x98

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After insight into the effects resolution

  I do an animation in resolution 1920 x 1080. In the overview section I have the resolution set to quarter, but my computer is not so quick preview is really laggy when I am editing the fx. I noticed that there is a custom option, but I have no idea what to make of this. How can I change this to a very low resolution that will run more smooth on my pc.

  Two places to adjust

  See photo a

  

  Check Edit > preference > Multi treatment preferences. Should consult Todd K videos on it via google or help and see how to adapt to your platform.

  

• Low volume after installing several different drivers. Can not find the original driver to reverse the effects

  Hello. First of all, thank you for taking the time to read this message. I'll try and add all the valuable information that I can. However, if you would like more information to help solve the problem, please let me know. So a few weeks ago, I noticed that my audio was very distorted (as you know that your laptop does when you work it, the sound the sound). I downloaded the driver HD audio Realtek, made sure it was updated to help with the distortion. Well, then the volume become too low. I continued install audio drivers Realtek HP, remove all devices from realtek (under sound, video, game in Device Manager controller), passing through updates on internet, etc., but nothing works. In addition, I have gone from reading devices (under the volume in the taskbar icon), by selecting My speakers, go to the properties and selecting improvements and selecting "Loudness Equalizer." So far, which helped a bit. My volume is now 100% and it looks like he did when he was 20% (when there is no problems).

  Unfortunately, I do not know how long this problem has persisted, and I don't think that there is a restore point before that time to try to reverse the effects. Is it possible that I can find the original driver delivered with this laptop? Currently, I went to Device Manager > Sound, Video, game controller, Realtek HD Audio, update > Browse > let me pick > choose the driver earlier.

  Any advice would really be welcome

  Hi @kendrat0,

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. Thank you for sharing the details of the problem. I want to help you.

  If I understand correctly the audio quality is lower than expected and need a solution.

  (Correct me if I'm wrong, and I thank you for the details)

  Could you please provide me with the product number of the PC? If you don't know how to find this information, please click here for more information.

  I have a few steps, you can perform to resolve the issue: remove audio drivers & reinstall the original drivers update Audio drivers on the official website of HP for windows 10 (click on the changes on the top to switch between the BONES).

  Increase the volume on the playback device settings after you set your speaker as the default device. For more steps, follow a similar post on the HP Forums: click here

  Perform a hard reset

  * Reset the BIOS default

  * Run the test Audio of Diagnostics of material for the PC HP (UEFI)

  * Update the BIOS

  * Reset your computer

  Perform a recovery of the HP system

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.

  Kind regards

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• After the effect cc 2015.3 update installation problem

  I can't install the effect after update cc 2015.3, showing an error after a movement during its installation. This time I saw a solution on the adobe page to uninstall and install again, but now it is not at all set up, I am facing this problem since the morning, also the installation offline link does not work, I can't download it from the link. Please someone help me of this *.

  After 50% of the download, I renamed the file named '1.0' to ' 1.0.old - 1 ' in the C:\Users\[UserName]\AppData\Local\Adobe\AAMUpdater directory and then I clicked retry and the download and installation is complete.

• After the effects of the pace

  I've created an animation in After Effects with a lot of layers and keyframes. I need to slow down the whole composition, but I don't want to go back and change every keyframe (should always be). I tried to slow the pace and the RAM Preview looked good... However, when I export composition, it goes back to its normal speed. What Miss me?

  Almost everyone has to deliver a specific frequency.  It can be determined by the ultimate reading device, by a web site or by the hardware on which it appears.  The only reason NOT to have a specific rate would be if you just do it for your own pleasure and do not play back anywhere else.

  If you do this just for fun, follow the model in another comp.  Activate the time-remapping.  Make your new longer than the original model and drag the last keyframe of the effect time remapping to slow it down.

• When I try to open after the effects of a window appears saying alert last log message was: &lt; 140735110578944 &gt; &lt; BEE_work queue &gt; &lt; 5 &gt; main thread of stacking: 524288 log crash generation may take a few minutes

  When I try to open after the effects of a window appears saying alert last log message was: < 140735110578944 > < BEE_work queue > < 5 > main thread of stacking: 524288 log crash generation may take a few minutes. Help, please

  Contact Adobe support.

• the effects\transform\crop of the video isn't "cropping" correctly in the effects control. 'left' must adapt to the top; 'top' must adapt to the right; "right' fits the bottom"; and 'down' to the left adjusts. Suggestions on how to reset?

  the effects\transform\crop of the video isn't "cropping" correctly in the effects control. 'left' must adapt to the top; 'top' must adapt to the right; "right' fits the bottom"; and 'down' to the left adjusts. Suggestions on how to reset?

  Have to ask - did you apply rotation to the clip?

  MtD

• How can I switch to after the effect of the Italian language English?

  How can I switch to after the effect of the Italian language English?

  Hello

  Please see change the language setting of the Adobe Creative cloud applications if it a CC license.

  Otherwise follow an Adobe product for another language or version of trading platform

  Hope that helps!

  Kind regards

  Sheena

• Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  I also have this problem. I was told that it is a bug, they work.

• After that the effects moved

  He comes to extract and then install it. I get an installation error message conflict (2015) after effects CC

  Hi margarets22550642,

  Please close all Adobe processes from the Task Manager, restart your computer and then install Adobe after 2015 the effect using this link , video effects, Visual effects software | Download the free trial version Adobe after effects CC.

  Kind regards

  Nicos