After Anyconnect I can't access to asa and LAN

Similar Questions

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• My old MSN e-mail account was hacked and blocked. I created a new Windows Live Hotmail account. How can I access the emails and blocked my old account contact information?

  My old MSN e-mail account was hacked and blocked. I created a new hotmail account. How can I access the emails and blocked my old account contact information?  Thanks for any help!

  original title: hacked E-mail

  Hi BigByrd,

  I'm afraid it's almost impossible to access the old MSN your Hotmail account is newly created account.
  See you soon ~

• I can't access drive "D" and remove some content to make more room.

  * Original title: upgrade.

  Hello. I'm trying to reinstall my own copy of windows 7 Ultimate on my laptop for a clean start.

  My problem is that, because I only did this for a while the "D" partition is completely filled. The bar that shows the ability is red instead of green and because there is no place, I can't reinstall the O/P.

  For some reason, I can't access drive "D" and remove some content to make more room. It does not appear on Device Manager, and when I try to access it through my computer it shows "D" drive must be empty.

  I also tried to add and remove programs, but they all seem to be on the C"" drive.

  How do I enter "D" drive to remove enough information for me to finish a reinstall?

  Start the custom installation, it will ask you where store system.  Click Advanced.  Delete all partitions.  The installation process will create the partitions, that he needs and format.  I recommend strongly against any other that what Windows 7 install really wants partitioning.

• Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Dear Adobe, I've updated my account, my payment charged 2 times 1 EUR and still I can't access the PS and LR! Pls help me to find a contact in the customer service! Much thanks! Rita Frei

  Go to Adobe Creative Cloud

  
  

  Hi Rita,.

  For 1 EUR costs please see Adobe Store | Order FAQ and your online payment

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• AnyConnect client can not access local network

  Hello

  I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.

  Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.

  I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.

  Thank you very much in advance for your support.

  ASA release 9.4 (1)
  !
  ciscoasa hostname
  activate the encrypted password of WmlxhdtfAnw9XbcA
  TA.qizy4R//ChqQH encrypted passwd
  names of
  mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
  !
  interface GigabitEthernet1/1
  nameif outside
  security-level 0
  192.168.1.100 IP address 255.255.255.0
  !
  interface GigabitEthernet1/2
  nameif inside
  security-level 100
  IP 139.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/3
  nameif DMZ
  security-level 50
  IP 172.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/6
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/7
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/8
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  Management1/1 interface
  management only
  nameif management
  security-level 100
  11.11.11.11 IP address 255.255.255.0
  !
  passive FTP mode
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  internal subnet object-
  139.16.1.0 subnet 255.255.255.0
  network dmz subnet object
  subnet 172.16.1.0 255.255.255.0
  wialon Server external ip network object
  Home 192.168.1.132
  wialon-Server network objects
  Home 172.16.1.69
  Wialon-service-TCP object service
  destination tcp source between 1 65535 21999 20100 service range
  Wialon-service-UDP object service
  destination service udp source between 0 65535 21999 20100 range
  network of the NETWORK_OBJ_139.16.1.0_25 object
  subnet 139.16.1.0 255.255.255.128
  outside_acl list extended access permit tcp any object wialon-Server eq www
  outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
  outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 DMZ
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
  !
  network obj_any object
  dynamic NAT (all, outside) interface
  internal subnet object-
  NAT dynamic interface (indoor, outdoor)
  wialon-Server network objects
  NAT (DMZ, external) service wialon Server external ip static tcp www www
  Access-group outside_acl in interface outside
  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  identity of the user by default-domain LOCAL
  Enable http server
  http 11.11.11.0 255.255.255.0 management
  http 139.16.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  service sw-reset button
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  domain name full ciscoasa.srdongato.null
  E-mail [email protected] / * /
  name of the object CN = srdongato
  Serial number
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 139.16.1.1, CN = ciscoasa
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_TrustPoint0 certificates
  certificate 09836256
  30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
  05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
  05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
  636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
  5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
  09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
  2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
  6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
  010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
  ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
  bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
  8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
  cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
  138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
  0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
  690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
  c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
  ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
  dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
  c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
  003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
  14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
  fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
  e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
  ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
  481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
  4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
  88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
  ff92ac3c 52
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  Certificate 0 is 836256
  308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
  05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
  130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
  35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
  61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
  4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
  e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
  c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
  13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
  b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
  93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
  1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
  758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
  617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
  2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
  589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
  1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
  f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
  2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
  f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
  9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
  78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
  aadbd82a 423f4ba8 563142bf 742771c 3
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
  Telnet 139.16.1.0 255.255.255.0 inside
  Telnet 11.11.11.0 255.255.255.0 management
  Telnet timeout 5
  without ssh stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 172.16.1.69 - DMZ 172.16.1.69
  dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
  dhcpd option 3 ip 172.16.1.1 DMZ interface
  dhcpd enable DMZ
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL-trust outside ASDM_TrustPoint0 point
  SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
  Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
  AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  Disable error recovery
  internal GroupPolicy_Wialon group strategy
  attributes of Group Policy GroupPolicy_Wialon
  WINS server no
  value of 192.168.1.1 DNS server
  client ssl-VPN-tunnel-Protocol ikev2
  by default no
  WebVPN
  AnyConnect value Wialon_client_profile type user profiles
  dynamic-access-policy-registration DfltAccessPolicy
  wialon_1 Wy2aFpAQTXQavfJD username encrypted password
  wialon_2 4STJ9bvyWxOTxIyH encrypted password username
  remote access to Wialon tunnel-group type
  attributes global-tunnel-group Wialon
  address pool Pool_139
  Group Policy - by default-GroupPolicy_Wialon
  tunnel-group Wialon webvpn-attributes
  enable Wialon group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75

  Hello

  You don't have NAT exemption the DMZ network to the pool of VPN traffic.

  Please try to add the following statement to run:

  nat (DMZ,outside) 1  source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup

  Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.

  no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup
  
  nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
  
  

  Cordially Véronique

• my laptop has completed the automatic update of vista and after that I can't access wireless router with an ethernet cable only

  My sony vaio laptop running windows vista has completed an automatic update and after that, I can't connect to my wireless network, I can access the internet with an ethernet cable.

  It worked perfectly fine before the update, I know that there is a problem with what I had the same problem in the past. The way it's been solved previously was to restore the laptop to an earlier point before the end of the update. Unfortunately I can't do that and the laptop has been completed, wiped and there is no backup where I can go to restore.

  I know I can remove some updates but don't know what 1, me it is another way to solve the problem.

  Your help would be much appreciated.

  Thank you

  Hi Nadzarif,

  You can try the following steps and check if it helps:

  Method 1:

  Because the wireless stopped working after windows update, you can check the Sony support link and try to install the latest version of the drivers for the wireless card and check if it helps:

  Sony support

  For more information, see the article:

  Update drivers: recommended links

  Method 2:

  Updated version has a problem in the history of the update.

  Step 1:

  You can check in the history of the update for the updates that are installed recently or before the show.

  a. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  See the Windows updates are installed

  Step 2:

  Uninstall recently installed updates and install the updates one at a time to understand what update is the cause of the problem.

  For more information, see the articles:

  Remove an update

  Install Windows updates

• BlackBerry smartphones can not access to MMS and Internet after upgrading the operating system

  Hi all. I am a new user of BB. I got my Curve 9300 three weeks back. As soon as it has been recorded, I was invited 2 upgrade operating system - which I made and subscribed 2 BB Protect. A friend sent me a MMS, but I can't consider my settings r bad. I cannot access the internet most of the time, but can still access site BBerry. Help, please. My carrier is MTN

  OK... so you should do the last thing that I have loaded... contact your operator for formal support. It's them you pay for your service... and they deliver it.

  Good luck!

• Access VPN ASA and cisco ISE Admin

  Hello

  Currently I'm deployment anyconnect VPN Solution for my client on ASA 9.2 (3). We use the ISE 1.3 to authenticate remote users.

  In the policy stipulates the conditions, I put the condition as below.

  Policy name: Anyconnect

  Condition: DEVICE: Device Type Device Type #All Device Types #Dial - in access EQUALS AND
  RADIUS: NAS-Port-Type is equal to virtual

  I'm authenticating users against the AD.

  I am also restrict users based on group membership in authorization policies by using the OU attributes.

  This works as expected for remote users.

  We also use the ISE to authenticate administrators to connect to the firewall. Now what happens is, Cisco ASA valid also against policy, administrators and their default name Anyconnect.

  Now the question is, how to set up different political requirement for access network admin and users the same Firewall VPN.

  Any suggestions on this would be a great help.

  See you soon,.

  Sri

  You can get some ideas from this article of mine:

  http://ltlnetworker.WordPress.com/2014/08/31/using-Cisco-ISE-as-a-generic-RADIUS-server/

• I can't access my nas on lan connection drive

  I can't access my NAS drive on a local network connection (essentially acting as an external hard drive until the BB House is sorted) worked a week ago, but had a B@#ch of a virus. The virus now disappeared but think that a lot of my reg has been corrupted/gone. Is there a way I can resolve this issue without having to re - install windows? I am running windows 7 sp1. My discovery of net will not, unless I have turn off the windows firewall. The NAS drive is a disk 500 GB looqs meebox configuration. Any help would be appreciated. Thank you

  Hi KrisPerks,

  I'm sorry to hear that you encounter the problem with connecting to NAS after removing a bunch of virus. Do not worry, I'm here to help you with this question.

  Let us try the following methods and check if it works for you.

  Method 1:

  Run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Tool (SFC) System File Checker scan. Scan tool running System File Checker will help you fix corrupt or missing system files on your computer.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Also use Microsoft Safety Scanner and check if there is no threat of viruses.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Please reply with the status of the issue, so that we can better help you.

• Without a password how can I access the computer and make my own?

  I inherited a Mac Mini (2012, but do not have the password to the owner (departed).) How can I access and make my own?

  Follow the steps here:

  What to do before you sell or give away your Mac - Apple Support

  To restore to a factory State, set up like yours.

• A domain user can only access Xch2007 servers and blocked access to all other servers in the domain.

  We must put in place a 2008r2 domain user account and allow it access xch2007 email and a file only decidated server.   Access to the other app domain, print and file servers will be blocked.    What will be the best way to do this?   Can we use Group Policy?

  Your Windows Server 2008 R question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question on the Windows Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can't access the "devices and printers" in Windows 7

  I'm unable to access the "devices and printers" menu in windows 7 (32)

  When I click on the menu, it crashes just a white screen and never load.  I checked the print spooler service and it is running...

  If you have installed McAfee software that can block the enumeration of objects in devices and printers.  Make sure that the Bluetooth service works also if you have any compatible bluetooth devices. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I have a student permit a year creative cloud, but after update, I can't access the subscriptions for all apps

  I get error 130:11 when you try to open acrobat, and I can't open my apps because it says that I don't have a subscription.  On July 1, 2015, I bought my student permit that has been for a year.  I really need access to the CC for the work.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I suddenly (after 3 years) can't access my email accounts through Windows Live Mail.

  Technology service provider says it's a problem of Windows Live Mail. All elso works very well... Can anyone help? Here is the response of the software...

  Can't send or receive messages on behalf of Eastlink. The host 'pop.eastlink.ca' is not found. Please check that you have entered the server name correctly.  Server: 'pop.eastlink.ca' Windows Live Mail error ID: 0x800CCC0D Protocol: Port POP3: secure (SSL): No.

  Notes: Server name is entered correctly and the correct ID for the server:
  Any thoughts?

  Display the port number in the error message do not put you to any security risk. It is not specific to the user, this is the type of account. All POP3 users use the same ports. All uses of the IMAP use the same ports.

  Windows Live Mail help is in this forum, but you get no e generic response without the full error message.
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all